Features:
Model: 42BLF01ú+42BLF02ú+42BLF03
Number of Poles: 8
Number of Phases: 3
Nominal Voltage VDC: 24
Rated speed RPM: 4000
Continuous Torque N-m: 0.063~0.188
Output Power Watts: 26~78
Peak Torque1 N-m: 0.18~0.6
Peak Current Amps: 4.6~14.1
Line to line Resistance Ohms: 0.6~1.8
Line to line Inductance mH: 0.18~0.54
Torque constant N-m/Amps: 0.042~0.044
Back EMF V/kRPM: 4.4~4.65
Rotor inertia g•cm2:: 24~72
Body Length(L) mm: 47~79
Mass kg: 0.33~0.63
SD-2H086MB
Features
Low cost and good high-speed torque
14 selectable resolutions
Supply voltage up to +80VDC
Suitable for-2-phase and 4-phase motors
Output current up to 5.86A
Dip switch current setting 8different values
Optically isolated input signals
Pulse frequency up to 200KHz
Automatic idle-current reduction
Small size (107*97*48),Weight:1KG
SD-2H044MA
Features
Low cost and good high-speed torque
Supply voltage up to +45VDC
Output current up to 5.86A
Optically isolated input signals
Automatic idle-current reduction
14 selectable resolutions
Suitable for-2-phase and 4-phase motors
Dip switch current setting 8 different values
Pulse frequency up to 200KHz
Dip switch current setting 8 different values
Small size (122.2*90*33),Weight:0.3KG
Q2HB88M
Features
(1) High performance, low price
(2) Two group 32 channels constant angel and constant torque subdivision. Highest subdivision: 480
(3) The motor phase current is reduced to set current value 100 ms after receiving the last pulse edge
(4) Bipolar constant current chopping circuit
(5) Opto-isolated input/output
(6) Driven current is adjustable continuously from 0.5A/phase to 8A/phase (0.4A/phase to 6.4A/phase)
(7) Single power supply, voltage arrange from DC24/V to 80V (DC40V to130V)
(8) Highest response frequency: 200Kpps
(9) Over voltage protection, overheat protection, over current protection
