Main features:
1.It applied to plastic products in the aspects of riveting, cutting, sealing and welding.
2.Optimization of the heat welding defects (yellowing, edge burning and blocking up).
1.Choose different horns and corresponding bases according to different working parts.
2.Have low demand of mental welding surfaces and no need of any flux.
3.Be applied for fusing nickel net of ni-h battery and nickel sheet, aluminum foil and aluminum sheet and so on.
4.Fuse one and more together.
Multiple spot welder
1.Micro computer timer controller to set different spot point of electric plessure, and time.
2.Easy for operation in lower holder to move up/down of machine.
3.Spot multi-point on one line at once.
4.Cooling water circling system to ensure longer production.
5.Spot position easily adjusted.
6.Two set start at the same time for different size wire mesh.
- SPOT SOLDERING:
Voltage Input: AC 180V~240V
Primary Current: 2A~15A;
Soldering Current: 50A~800A (Related Pulse Range 1ms~19ms)
Welding metal thickness: less than 0.15MM
- RECHARGE:
Voltage Recharge Range: 4.2~15V
Current Recharge Range: 0~2A
Dimensions: 140x245x200 mm
Net Weight: 4.3 kg
Gross Weight: 6kg
Characteristics
1. The machine is combination of battery spot welding and circuit board solder, that make you work more convenience.
2. Fixed spot-welding head and mobile spot-welding pen are combined together in one machine so that the welding will become flexible.
3. Possess the function of 2,4,6,8 welding pulses selection, make the solder joint reliable.
4.Possess welding current rapid regulatorï¼?selecting the current will become quick and efficient.
5.The anti-static soldering station which controls the temperature accurately, it is suited for welding any integrated circuit or wiring.
6.The removable footswitches can satisfy the welding position requirement or sophisticated technology.
7.The fixed spot-welding head has pressure regulating device which makes the solder connections more stable.
Scope of application
Weld lead wire of Different kinds of rechargeable batteries rapidly.
The production, installation and welding to lithium battery and mobile power.
Weld lead wire of hardware and wire.
Welding thickness:
The copper head: 0.1~0.3mm
The welding pen: 0.1~0.2mm
Dimensions: 140x245x200mm
Net weight: 7kg
Gross weight: 8kg
Spot-welder part:
Supply voltage: AC110V / 220V±20V
Power: 1.9KW (Instantaneous)
Current: 500A
Time of double pulse: 1~10ms (adjustable)
Time of four pulses: 2~20ms (adjustable)
Time of eight pulses: 8~80ms (adjustable)
Features
1. Rapidly spot welding ï¼?0.5~5msï¼?is controlled by micro-computer welding mode.
2.Thinner nickel piecesï¼?0.03~0.06mmï¼?can be welded by single pulse rapid welding mode.
3. Include 3 pulse mode selections of single, double and 16 pulses.
4. Speediness electric current setting function in knob is suitable for thickness workpiece to weld.
5. It is convenient to be controlled by foot on light and handy hanging arm which the height can be adjusted.
6. The professional welding pressure adjuster is suitable for different thickness workpiece and makes welding spot more stable.
7. Connect external discharging welding desktop switch, welding pins is in place and spot welding discharge control independently.
8. Use Aluminum alloy welding pin to make welding reliable and welding spark splash small.
9. It can be easily installed on any desktop without purchasing special work bench.
Range of application
1. Lithium battery: The product welding and repair welding of rechargeable battery
2. Mobile power: The production of Charge Pal
3. The welding of metal workpiece
Optional accessories: Work bench, Desktop manual discharge switch
Electrical data:
Supply Voltage: Power 1.5kw(Instantaneous )
Time of Single Pulse: 0.5 ~5ms (Adjustable)
Time of Double Pulses 1 ~10ms (Adjustable)
Time of 16 Pulses 0 ~80ms (Adjustable)
Our company welding tip has the stable quality, fast response time, soldering heat evenly. no tin, beautiful welding surface, curve smoothing, long life can reach 7-20 million times etc advantage, then our products are highly praised by customers. Moreover, our products using imported materials, independent production, wholesale, according to customer demands for specific welding products, provide the required welding heads for customers. We also can provide the free sample to customer try it
1.Electrode Force is easily adjustable.
2.Powerful DC power supply produces welds in short time, practically no sparks and no discoloration.
3.Heat impact from welding is so small that it does not change any characteristics of the battery being welded.
4.Weld spot has the same color as the welded material.
5.All welding parameters are controlled from a keypad on the front of the machine.
6.Controller LCD panel displays welding parameters making process control accurate and convenient.
3GOA Portable 650A Spot Welder
For iPhone XS and above models
When a third-party battery or a genuine replacement battery is replaced by a third-party repair shop that isn't one of Apple's authorized partners.
1.High quality,high efficiency,98% power factor,three-phase input load balancing,the impact on the user grid greatly reduced,DC input current,smooth,inductance is zero,1000HZ working frequency,time control precision is 1MS;
2.High-strength body structure,good rigidity,direct pressurizing mechanism,linear bearings used in the guiding structure enable good mobility;
3.Adopt high-speed microprocessors,use intelligent optimal calculation method,LCD interface,can save 60sets welding schedule numbers,There are functions of switch display in both Chinese and English,provide external BCD call interface,system fault diagnosis alarm automatically.etc;
4.Specially suitable for welding higher conductive rate of material(such as aluminum,copper,silver and so on) and much more thicker workpiece,widely used in automobile,aerospace and other high request products and industry.
Handheld spot welder with 6 gears adjustable power for precise welding during battery repair, 3GOA portable spot welder uses a high-multiplier lithium battery as the power supply. 3GOA spot welder with battery nickel sheet plated steel strip mainly used for welding of nickel sheets of cylindrical batteries such as 18650. This 650A DIY soldering machine can be used to solder the battery protection board when replacing the battery.
Application:
As we know, for iPhone XS and above models, when a third-party battery or a genuine replacement battery is replaced by a third-party repair shop that isn't one of Apple's authorized partners, the battery health menu will show a warning about being unable to verify this iPhone has a genuine iPhone battery. The solution for this kind issue is to swap the original battery protection board to the new battery. This spot welder can be used to solder the battery protection board to solve this problem.
Features:
1. High power lithium battery
2. 40cm welding pen cable for more flexible operation
3. Level 1 to level 6, adjustable 6-level power for more precise soldering
4. Automatically thermal protection.
5. 67000mAh battery with capacity indicator to show the percentage
6. Thickened pure copper overflow strip
7. Type-C 2A charging.
8. Suitable for 18650 nickel cadmium battery, nickel sheet of cylindrical battery, NI-MH battery, nickel-hydrogen batteries, etc.
Instructions
1. Power on/off.
- Press and hold the power button for two seconds in the shutdown state, the light goes on and the device turns on.
- Press and hold the power button for two seconds in the power-on state, the light goes off and the device shuts down.
2. Switch output mode.
The welding output is started after the device is turned on, and the output mode can be switched by pressing the power button once. There are two output modes available:
- Automatic output: The spot welding pen is automatically detected and outputs once when both welding pens are detected to have touched the metal.
- Manual mode: press manual spot welding button for one second, the spot welding pen will be output once.
1.Full digital microcomputer control system,three grades discharge design(Pre-pressing,welding and tempering),equipping functions of Constant Voltage,Constant Current,Constant Heating,Slowly Increasing,Slowly Decreasing,save multi-group Schedule Number,etc.easily meet customers high requirements of welding quality;
2.Integrated high-strength frame Structure,more impact resistant and anti-shock ability under high pressure operation,to achieve more accuracy of welding position,both spot welding and projection welding,reach the largest welding performance;
3.All copper water-cooling transformer,Multi-channel forced water cooling system to ensure the reliability of the machine running for long time;
4.Manufactured in accordance with international ISO Standard and European CE Certificate.
Model NO: DTN3-50KW
Conductive Way: Both-Sided
Welding Spot Number: Single
Type: Universal
Transport Package: Wooden Case
Trademark: dingjuquanqiu
Origin: China
HS Code: 8515809090
Production Capacity: 50 Sets/Month
Input power voltage(v)1-220¡à10%
Efficiency(%)87
Power factor(%)0.9
Rated input power capacity(kva)3.7
Max no-load voltage(v)68
Output current adjustment range (a)20-120
Suitable diameter of rod(mm)1.6-3.2
Rated duty cycle(%)(40¡æ, 10min)30
Insulation classF
Protection classIp21
Weight(kg)3.8
Dimensions (mm)273x115x180
273x115x180mm, weight is 3.8kg
8240 Spot Welder Suppliers
Short on time? Let Spot Welder sellers contact you.
