Find Verified Solid Particle Contamination Tester Suppliers, Manufacturers and Wholesalers

FDR-2801 Jet fuel solid particle contamination tester
Scope
This instrument conforms to ASTM D2276 M1L-T-5624N standards. It can detect contaminants propellant solid particles. Under specified conditions, the samples were filtered glass sand core filtration devices, increase the weight on the microporous membrane filters is the total sample contaminants.

Features
1, the instrument for the desktop, stainless steel control panel, ceramic coating;
2, digital timer, Fengming alarm;
3, the evacuation time can be set arbitrarily;
4, low noise pump;
5, the standard glass fittings, conforming to ASTM standards;
6, using molding and metal clamp;

Technical Parameters
1. Filter: vacuum pumping
2, vacuum degree: 80KPA
3, machine power: 500W
4, the working units: a standard filtration system
5 Power supply: AC220V / 50Hz
6. Timing: Digital timer

Scope
This instrument conforms to sh / t0093 and astm d2276 m1l-t-5624n standards. It can detect contaminants propellant solid particles. Under specified conditions, the samples were filtered glass sand core filtration devices, increase the weight on the microporous membrane filters is the total sample contaminants.

Features
1, the instrument for the desktop, stainless steel control panel, ceramic coating;
2, digital timer, fengming alarm;
3, the evacuation time can be set arbitrarily;
4, low noise pump;
5, the standard glass fittings, conforming to astm standards;
6, using molding and metal clamp;

Technical parameters
1. Filter: vacuum pumping
2, vacuum degree: 80kpa
3, machine power: 500w
4, the working units: a standard filtration system
5 power supply: ac220v / 50hz
6. Timing: digital timer

Product Brands: ABC, ABC Alkaline.
Available Variants: AAA, AA, C, D, 9V

Product of Indonesia

Product Name Particle board/Chipboard
Size(mm) 1220*2440mm,1250*2500m, or upon request
Glue WR,WBP,E0,E1,E2
Core Poplar, hardwood, eucalyptus, combi
Thickness(mm) 1.5-25mm or as your requested
Thickness Tolerance +/-0.2mm (thickness<6mm),
+/-0.3~0.5mm (thicknessâ?¥6mm)
Usage For furniture, packing, decoration
Moisture <14%
Certification CE, SGS, Carb, FSC, ISO9001
Packing details Inner Packing-Pallet is wrapped with the 0.20mm plastic bag
Outer Packing-pallets are covered with plywood or carton boxes and strong steel
Loading Quantity 1x20 GP 8 pallets/22CBM
1x40 GP 16 pallets/45CBM
1x40 HQ 18 pallets/53CBM
MOQ 1x20' GP

We are suppliers of BEST QUALITY Belgium Tubular Chip Board and looking for serious buyers in need of our products, contact with us for more details.
2135*800*33mm Hollow Door Core Particle Board.

Product name: Hollow door core particle board
Size:2135*800mm
Thickness:33mm,38mm
Material:Pine
Density:350-400kgs/cbm
Grade:E1
Package:14 pallets/40'HQ,1022pcs/40'HQ
Minimum order: One 40'HQ

Particle Filter Half Mask

Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry.

The level of Fe% in the slag has been estimated by water displacement test.

This material con offer competitive advantages respect other metal scraps:
Price;
Stable Chemistry;

The material can be loaded loose in 20 heavy duty container.

For further details feel free to contact us.

We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
:
1. >85% Fe Average 600mm Max Fraction
2. >78% Fe Average 20-300mm Fraction

The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact

We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag

- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)

The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.

At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.

The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.

The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.

The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.

Please feel free to contact us for further details.

Waste Specification:
European Classification: E46
EWC Code: 19.01.02
Basel Code: B10 10

The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.

At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.

The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.

The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.

The collected stock, is stored in open air, on cemented flooring.

Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.

Please feel free to contact us for further details

We offer a wide plethora of bluish-white lustrous metal Zinc. It is brittle at ambient temperatures but is malleable at 100 to 150C. Being a good conductor of electricity it has a wide usage in numerous applications. We offer this high quality Zinc to our clients at very economical price.

Properties
Melting point : 419.5C
Boiling point : 911C
Resistivity : 5.96 micro ohm-cm at 20 C
Standard state : solid at 298 K
Color : bluish pale grey
Classification : Metallic

We are engaged in offering Special High Grade Ingots and Jumbos of about 1 M. Ton size. LME registered / Non-registered / Special High Grade Ingots and Jumbos as well as High Grade and Zamak 3 etc are offered by us.

Petroleum Coke

Product Description :
Petroleum coke is a byproduct of the oil refinery industry. Petroleum coke refers to all types of carbonaceous solids obtained in petroleum processing, which includes green or raw, calcined and needle petroleum coke. Petroleum coke is used in many applications, including electrodes and anodes. It is also used as a fuel in the metal and brick industries.

Price of product ( USD price or FOB price) :
10.000 MT monthly market price.
100.000 MT monthly market price Less 8%.

Product origin : Russia and Non Russia

Key Specifications/Special Features :
Fuel Grade Petroleum coke of Low/High Sulphur.
Calcium Petroleum coke, Graphitized Petroleum coke.
Raw Petcoke, Anode Grade, Green Grade, Carbon Grade, Cement Grade, Needle coke, etc.


Minimum Order Size and Packgaing details :
Bulk in tanker vessels.
Tanks 20 MT.

Commodity: Caustic Soda Flakes
Caustic Soda Pearls / Bead / Prill / Granule
Caustic Soda solid
Molecular formula: NaOH
Molecule Weight: 40
H.S code: 28151100
CAS: 1310-73-2
UN number 1823
Dangerous Class 8

We use rich natural gas resources and its strategic of liquid alkali procurement, storage, transport conditions, gradually formed transportation and sale of liquid alkali, production and sales base and external processing of flake caustic, solid caustic soda, granular caustic soda, which provide ideal condition and environment for domestic and foreign trade.

Typical Specifications:

Indexes Purity NaCl Na2CO3 Fe2O3
99 99 0.15 0.9 0.003
98 98 0.15 0.5 0.002
96 96 2.8 0.85 0.005

Used as a raw material in the manufacture of soaps ,detergent, textiles and paper ,and likewise ,in water softening and treatment, drilling mud in oil field, refining petroleum products, and washing beer and soft drink bottles, in food and drug industry ,it is used as acidity regulator, alkali, and so on.

Packing :Flake/pearl:25kg/plastic woven bag with PE inner
Solid :200kg/ iron drum

Loading weight in 1 x 20fcl: 27mt

Canned Tuna Solid in Oil

Guar Gum Types

Food, Feed & Pharma Grades
- Various particle sizes (very coarse to very fine).
- • Various hydration rates (very slow to very fast).
- • Various viscosities (1% solution in water = 50 cps to 7000 cps).
- • Special deodourised grades.
- • Special low microbiological count grades.
Technical Grades
Straight Guars:
- Various particle sizes (very coarse to very fine).
- Various hydration rates (very slow to very fast).
- Various viscosities (1% solution in water = 50 cps to 8000 cps).
- Special good Dry-Flow (Free-Flow) Guars.
- Special Anti-Dusted Guars.
Modified Guars and Guar Derivatives:
- Fast hydrating / High Viscosity / Diesel Slurriable (particularly suitable for oil, gas and other deep well drilling and EOR operations like polymer flooding / fracturing),
- Borated.
- Reticulated.
- Oxidised.
- Depolymerised.
- High water absorbance capacity.
- Carboxymethyl (Anionic).
- Hydroxypropyl (Nonionic).
- Hydroxypropyltrimethyl chloride (Cationic).
- Hydroxypropyltrimethyl chloride Hydroxypropyl (Cationic, double derivative).
- Special good Dry-Flow (Free-Flow) Modified Guars / Guar Derivatives.
- Special Anti-Dusted Modified Guars / Guar Derivatives.

Guar gum is a fiber from the seed of the guar plant.
Guar gum is used as a laxative. It is also used for treating diarrhea, irritable bowel syndrome (IBS), obesity, and diabetes; for reducing cholesterol; and for preventing “hardening of the arteries” (atherosclerosis).
In foods and beverages, guar gum is used as a thickening, stabilizing, suspending, and binding agent.
In manufacturing, guar gum is used as a binding agent in tablets, and as a thickening agent in lotions and creams.
How does it work?
Guar gum is a fiber that normalizes the moisture content of the stool, absorbing excess liquid in diarrhea, and softening the stool in constipation. It also might help decrease the amount of cholesterol and glucose that is absorbed in the stomach and intestines.
There is some interest in using guar gum for weight loss because it expands in the intestine, causing a sense of fullness. This may decrease appetite.
USES:
Diarrhea. Adding guar gum to the tube feeding formula given to critical care patients may shorten episodes of diarrhea from about 30 days to about 8 days.
High cholesterol. Taking guar gum seems to lower cholesterol levels in people with high cholesterol. Guar gum and pectin, taken with small amounts of insoluble fiber, also lower total and “bad” low-density lipoprotein (LDL) cholesterol, but don't affect “good” high-density lipoprotein (HDL) cholesterol or other blood fats called triglycerides.
Diabetes. Taking guar gum with meals seems to lower blood sugar after meals in people with diabetes. By slowing stomach emptying, guar gum may also lessen after-meal drops in blood pressure that occur frequently in people with diabetes.
Constipation.
Irritable bowel syndrome (IBS).

100% Cotton T-Shirts - Colar, Round neck, V neck, printed, plain solid colors, Embroidery