Soda Ash Dense, also known as Sodium Carbonate (Na2CO3), is a type of soda ash with a higher density than light soda ash.
Characteristics
1. Density: Soda Ash Dense has a density of around 1.0-1.1 g/cm�??�?�³.
2. Appearance: It is a white, odorless powder.
3. Purity: Typically has a purity of 99.5% or higher.
Applications
1. Glass manufacturing: Soda Ash Dense is used as a flux to reduce the melting point of silica, making it easier to produce glass.
2. Detergent manufacturing: It is used as a builder in detergent formulations to enhance cleaning power.
3. Paper manufacturing: Soda Ash Dense is used to improve the brightness and strength of paper.
4. Water treatment: It is used to remove impurities and soften water.
Total alkali content : 99.2% min
Chlorides(nacl): 0.70% max
Sulphate(so4): 0.03% max
Iron(fe2co3): 0.0035% max
Water insoluble matter : 0.03% max
Lignition loss: 0.80% max
Bulk density: 0.9g/ml min
Particle size 180 p m sieve remainning: 70.0% min
Widely used in manufacture of chemicals and metallurgy , medicine, petroleum, hides processing, textile, printing and dyeing, foodstuff, photograph, glass, enamel and paper industry, etc. As well as for purification of water. White purification.
Soda ash light 40kgs/750kgs
Soda ash dense 50kgs/1000kgs
Total alkali content : ²99.2% min
Chlorides(nacl): 0.70% max
Sulphate(so4): 0.03% max
Iron(fe2co3): 0.0035% max
Water insoluble matter : 0.03% max
Lignition loss: 0.80% max
Bulk density: 0.9g/ml min
Particle size 180 p m sieve remainning: 70.0% min
Widely used in manufacture of chemicals and metallurgy , medicine, petroleum, hides processing, textile, printing and dyeing, foodstuff, photograph, glass, enamel and paper industry, etc. As well as for purification of water. White purification.
Soda ash light 40kgs/750kgs
Soda ash dense 50kgs/1000kgs
Dense and Light Sode Ash Chemical Specifications
NO Characteristics Range
1 Alkalinity ( as Na 2C O 3) %
2 Chloride in term of NaCL%
3 Iron ( Fe+2) %
4 Insolubility in water %
Dense and Light Sode Ash Physical Specifications
NO Characteristics Range
1 Bulk Density ( Dense),gr/cm 3 1-1.05
2 Bulk Density ( Light),gr/cm 3 0.6-0.7
Dense Granular
3
Mesh NO. %
200
>70 25-50
70-20 65-85
< 20 20-1
10 0
23623 Soda Ash Light Soda Ash Dense Suppliers
Short on time? Let Soda Ash Light Soda Ash Dense sellers contact you.
Sodium Carbonate or Soda Ash It is used to manufacture a variety of glass products such as container glass for packaging, float glass for buildings and automobiles, fiber glass for insulation, etc.
in Soap and Detergent It is used as a filler, pH adjuster, agglomerate aid, and water softener to manufacture soaps and detergents.
It is also used to prepare sodium silicate, in photograph development process as a pH regulator, swimming pools to neutralize the excess chlorine, brick industry as a wetting agent, processing non- ferrous metals, etc.
Soda ash dense is the grade preferred for glass manufacture because its granular properties make it widely dust-free and reduce the risks of segregation during transport and handling. Sodium carbonate (Na2CO3) is used in the glass and silicate industries and also in metallurgy for its sodium oxide content (Na2O) and for its properties as a flux. It is also widely used as an alkaline reagent for the neutralization of acids and mineral or organic acid salts.
Usage: Mainly used in the glass manufacturing and crystal production industries as a melting aid.
Packing: 50kg bags, 1200kg jumbo bags.
Item Specifications
Sodium Carbonate (Na2Co3) %: Min 99.2
Chloride in terms of (NACL) %: Max 0.4
Iron (Fe+2) %: Max 0.004
Insoluble in water %: Max 0.1
Bulk Density, gr/cm3: 0.85 1.1
Na2o %: Max 58
Particle Size 180UM Sieve Remaining: 70% Min
Soda Ash Dense, also known as Sodium Carbonate (Na2CO3), is a type of soda ash with a higher density than light soda ash.
Characteristics
1. Density: Soda Ash Dense has a density of around 1.0-1.1 g/cm�³.
2. Appearance: It is a white, odorless powder.
3. Purity: Typically has a purity of 99.5% or higher.
Applications
1. Glass manufacturing: Soda Ash Dense is used as a flux to reduce the melting point of silica, making it easier to produce glass.
2. Detergent manufacturing: It is used as a builder in detergent formulations to enhance cleaning power.
3. Paper manufacturing: Soda Ash Dense is used to improve the brightness and strength of paper.
4. Water treatment: It is used to remove impurities and soften water.
Sodium Carbonate or Soda Ash It is used to manufacture a variety of glass products such as container glass for packaging, float glass for buildings and automobiles, fiber glass for insulation, etc. in Soap and Detergent It is used as a filler, pH adjuster, agglomerate aid, and water softener to manufacture soaps and detergents. It is also used to prepare sodium silicate, in photograph development process as a pH regulator, swimming pools to neutralize the excess chlorine, brick industry as a wetting agent, processing non- ferrous metals, etc.
Soda Ash Dense has a higher density lowers the temperature at which sand melts when making glass. Glass that uses soda ash is flat glass (windows, automotive, mirrors) and container glass (food and beverage bottles, tumblers and serving dishes). Soda ash is also used in detergents, directly as a water softener in dry mix, and as a raw material for other detergent chemicals. Soda Ash is used for neutralization (lead-acid battery recycling, environmental acid controls) and in aluminum manufacturing. In addition to being a fundamental ingredient in glass manufacturing, soda ash is necessary to petroleum refining, pulp and paper production. Soda ash is one of the ten highest volume minerals produced in North America and constitutes nearly 25% of every pound of glass manufactured. It�?�¢??s used in Ceramics, chemical reagents, soaps, electroplating, metal cleaning, paper coating, enameling, and other general chemical uses.
Sodium Carbonate, Dense
WC Code: 19-011-001
Chemical Characteristics
Sodium Carbonate (as Na2CO3): 99.6% Min
Sodium Oxide (as Na2O): 58.2% Min
Sodium Sulfate (as Na2SO4): 2000PPM Max
Sodium Chloride (as NaCl): 1000PPM Max
Water Insoluble: 500PPM Max
Bulk Density (lbs/ft): 56.0 Min
*Meets FCC standards and is GRAS
Particle Size Distribution
+ 20 mesh (850 micron): 0.4% Max
+ 30 mesh (600 micron): 8.0% Max
+ 100 mesh (150 micron): 85.0% Min
200 mesh (75 micron): 2.0% Max
Packing
Soda Ash Dense has a higher density lowers the temperature at which sand melts when making glass. Glass that uses soda ash is flat glass (windows, automotive, mirrors) and container glass (food and beverage bottles, tumblers and serving dishes). Soda ash is also used in detergents, directly as a water softener in dry mix, and as a raw material for other detergent chemicals. Soda Ash is used for neutralization (lead-acid battery recycling, environmental acid controls) and in aluminum manufacturing. In addition to being a fundamental ingredient in glass manufacturing, soda ash is necessary to petroleum refining, pulp and paper production. Soda ash is one of the ten highest volume minerals produced in North America and constitutes nearly 25% of every pound of glass manufactured. Itâ??s used in Ceramics, chemical reagents, soaps, electroplating, metal cleaning, paper coating, enameling, and other general chemical uses.
Sodium Carbonate, Dense
WC Code: 19-011-001
Chemical Characteristics
Sodium Carbonate (as Na2CO3): 99.6% Min
Sodium Oxide (as Na2O): 58.2% Min
Sodium Sulfate (as Na2SO4): 2000PPM Max
Sodium Chloride (as NaCl): 1000PPM Max
Water Insoluble: 500PPM Max
Bulk Density (lbs/ft): 56.0 Min
*Meets FCC standards and is GRAS
Particle Size Distribution
+ 20 mesh (850 micron): 0.4% Max
+ 30 mesh (600 micron): 8.0% Max
+ 100 mesh (150 micron): 85.0% Min
200 mesh (75 micron): 2.0% Max
Packing
Soda ash light is very well suited for detergent and chemical applications. Sodium carbonate (Na2CO3) is widely used as an alkaline support and for pH regulation. It is also commonly used as a source of sodium and for water softening applications.
Items Specification
Sodium Carbonate (Na2Co3) %: Min 99.2
Chloride in terms of (NACL) %: Max 0.4
Iron (Fe+2) %: Max 0.002
Insoluble in water %: Max 0.1
Bulk Density, gr/cm3: 0.55- 0.65
Na2o %: Max 58
Particle Size 180UM Sieve Remaining: 70% Min
Soda Ash Light, also known as Sodium Carbonate (Na2CO3), is a type of soda ash with a lower density than dense soda ash.
Characteristics
1. Density: Soda Ash Light has a density of around 0.5-0.6 g/cm�³.
2. Appearance: It is a white, odorless powder.
3. Purity: Typically has a purity of 99.2% or higher.
Applications
1. Glass manufacturing: Soda Ash Light is used as a flux to reduce the melting point of silica, making it easier to produce glass.
2. Detergent manufacturing: It is used as a builder in detergent formulations to enhance cleaning power.
3. Paper manufacturing: Soda Ash Light is used to improve the brightness and strength of paper.
4. Textile industry: It is used as a dye fixative and to improve the colorfastness of textiles.
True specific gravity 2.533 (20�°C), bulk density 0.90min. Easily soluble in water, Maximum solubility at 35.4�°C. The aqueous solution appears strong alkalinity. On exposure to air it easily absorbs moisture, carbon dioxide, and gradually forms sodium bicarbonate (caking soda).
Usage:
1.The manufacture of glass is one of the most important uses of sodium carbonate. When it is combined with silica (SiO2) and calcium carbonate (CaCO3) and heated to very high temperatures, then cooled very rapidly, glass is produced. This type of glass is known as soda lime glass.
2. Soda ash also is used to clean the air and soften water.
3. Manufacture of Caustic Soda and dyestuffs
4. metallurgy (processing of steel and extraction of iron etc),
5. (flat glass, sanitary pottery)
6. national defense (TNT manufacturing, 60% gelatin-type dynamite ) and some other aspects, such as rock oil refining, paper manufacturing, paint, salt refining, softening of hard water, soap, medicine , food and so on.
Eltee DMCC is the top leading suppliers of Soda Ash Dense in the world. We supply Soda Ash Dense to all the major galss manufacturers of the world. Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material.
Properties of Soda Ash Dense :
* Chemical Formula: Na2CO3
* Molecular Weight : 105.99
* Absolute Density, g/cm3@25 degree C : 2.533
* Melting Point , degree centigrade: 851
* Solubility, max % @35.4 degree centigrade: 33.2
* pH of 1% solution @25 degree centigrade: 11.34
Chemical Properties:
* NaCl Weight % : 0.04% Max
* Si02% : 0.03 Max
* Organic Matter as C% : 0.01% Max
Product Usage :
* Glass Industries
* Chemical Intermediates
* Soap and Detergent formulations
* Water Treatment
* Flue Gas Desulfurization
* Pulp and paper
Eltee DMCC is the top leading suppliers of Soda Ash Dense Sachi Brand in the world. We supply Soda Ash Dense Sachi Brand to India, Bangladesh, China, Indonesia , Brazil, Egypt, Georgia, Japan, Jordan, Lithuania, Kenya, Malaysia, Nigeria, South Korea, Spain, United Arabian Emirates, Uganda, Thailand, Tanzania, Vietnam etc .
Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material.
Properties of Soda Ash Dense :
* Chemical Formula: Na2CO3
* Molecular Weight : 105.99
* Absolute Density, g/cm3@25 degree C : 2.533
* Melting Point , degree centigrade: 851
* Solubility, max % @35.4 degree centigrade: 33.2
* pH of 1% solution @25 degree centigrade: 11.34
Chemical Properties:
* NaCl Weight % : 0.04% Max
* Si02% : 0.03 Max
* Organic Matter as C% : 0.01% Max
Product Usage :
* Glass Industries
* Chemical Intermediates
* Soap and Detergent formulations
* Water Treatment
* Flue Gas Desulfurization
* Pulp and paper
Eltee DMCC is the Largest Exporters of Soda Ash Dense Sachi Brand in the world. We supply Soda Ash Dense Sachi Brand to Bangladesh in very Large Quantities. Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material.
Properties of Soda Ash Dense :
* Chemical Formula: Na2CO3
* Molecular Weight : 105.99
* Absolute Density, g/cm3@25 degree C : 2.533
* Melting Point , degree centigrade: 851
* Solubility, max % @35.4 degree centigrade: 33.2
* pH of 1% solution @25 degree centigrade: 11.34
Chemical Specifications :
* Alkalinity (as Na2Co3)% : 99.2% Min
* Chloride in terms of NaCL : 0.4% Max
* Iron Content: 0.002% Max
* Insolubility in water : 0.1 % Max
* Na02% (if its need): 58% Min
Appearance : (Mesh Size)
* Below 20 : 10% Max
* 20~30 : 25% Max
* 30~100 : 60% Min
* 100~140 : 7% Max
* 140 above : 3% Max
Product Usage :
* Soda Ash Dense is widely used Glass Industries
* Soda Ash Dense is used as Chemical Intermediates
* Soda Ash Dense is used for Water Treatment.
* Soda Ash Dense is used for Flue Gas Desulfurization
* Soda Ash Dense has wide usage in Pulp and paper industry.
Eltee DMCC is the Top Leading Exporters and International Suppliers of High Quality Soda Ash Dense in world. We supply Soda Ash Dense of high quality to more than 40 countries of world such as India, Japan, South Korea, Vietnam, Kenya, Australia, Egypt, Ghana , Uganda, Tanzania, Belgium, Botswana, Chile, Czech Republic, Ecuador, Guyana, Indonesia, Kuwait, Saudi Arabia, Oman, Morocco, Norway, Philippines, Rwanda, Senegal, South Africa, Tunisia, Zambia, Poland, Mexico etc.
Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material.
Properties of Soda Ash Dense :
* Chemical Formula: Na2CO3
* Molecular Weight : 105.99
* Absolute Density, g/cm3@25 degree C : 2.533
* Melting Point , degree centigrade: 851
* Solubility, max % @35.4 degree centigrade: 33.2
* pH of 1% solution @25 degree centigrade: 11.34
Chemical Specifications :
* Alkalinity (as Na2Co3)% : 99.2% Min
* Chloride in terms of NaCL : 0.4% Max
* Iron Content: 0.002% Max
* Insolubility in water : 0.1 % Max
* Na02% (if its need): 58% Min
Appearance : (Mesh Size)
* Below 20 : 10% Max
* 20~30 : 25% Max
* 30~100 : 60% Min
* 100~140 : 7% Max
* 140 above : 3% Max
Product Usage :
* Soda Ash Dense is widely used Glass Industries
* Soda Ash Dense is used as Chemical Intermediates
* Soda Ash Dense is used for Water Treatment.
* Soda Ash Dense is used for Flue Gas Desulfurization
* Soda Ash Dense has wide usage in Pulp and paper industry.
23623 Soda Ash Light Soda Ash Dense Suppliers
Short on time? Let Soda Ash Light Soda Ash Dense sellers contact you.
