Soda ash, also known as sodium carbonate (Na2CO3), is an alkali chemical refined from the mineral trona or naturally occurring sodium carbonate-bearing brines (both referred to as natural soda ash), the mineral nahcolite (referred to as natural sodium bicarbonate, from which soda ash can be produced), or manufactured from one of several chemical processes (referred to as synthetic soda ash).
Soda Ash Dense, also known as Sodium Carbonate (Na2CO3), is a type of soda ash with a higher density than light soda ash.
Characteristics
1. Density: Soda Ash Dense has a density of around 1.0-1.1 g/cm�??�?�³.
2. Appearance: It is a white, odorless powder.
3. Purity: Typically has a purity of 99.5% or higher.
Applications
1. Glass manufacturing: Soda Ash Dense is used as a flux to reduce the melting point of silica, making it easier to produce glass.
2. Detergent manufacturing: It is used as a builder in detergent formulations to enhance cleaning power.
3. Paper manufacturing: Soda Ash Dense is used to improve the brightness and strength of paper.
4. Water treatment: It is used to remove impurities and soften water.
Soda ash dense, also known as sodium carbonate or soda ash, is a chemical compound with the chemical formula Na2CO3. It is a white, odorless, and alkaline powder that is soluble in water. Soda ash is a crucial industrial chemical used in various applications, including:
Manufacturing of Glass: Soda ash is a key ingredient in the production of glass. It helps reduce the melting point of silica, making it easier to work with and allowing for the creation of clear glass products.
Water Treatment: It is used in water treatment processes to adjust pH levels and soften water by precipitating calcium and magnesium ions, which can cause hardness.
Detergents and Cleaning Products: Soda ash is a common component in many detergents and cleaning products due to its ability to remove grease, stains, and dirt.
Chemical Industry: It serves as a pH regulator and buffering agent in various chemical processes.
Metallurgy: In metallurgical applications, it can be used to extract metals from ores and to remove impurities from metal solutions.
Textile Industry: It is used in the dyeing and printing of textiles.
Food Industry: In the food industry, soda ash can be used as a food additive (E500) for various purposes, such as adjusting pH, improving the texture of food products, and acting as a leavening agent in baking.
Soda ash is available in two main forms: dense and light. The term â??soda ash denseâ?? refers to the denser, granular form of sodium carbonate. It has a higher bulk density compared to soda ash light, which is a finer, less dense powder. The choice between these two forms depends on the specific application and processing requirements.
Soda Ash (Sodium Carbonate) Light and Dense, for Glass Industry, Detergent materials and verious industries. Purity 99.2% min, Packing with 40/50/750/1000Kg PP Bags
5,Character: Anhydrous is a white crystalline powder, relative density 2.53, melting point 851 ºC, heated to 400 ºC decomposition. Insoluble in ethanol, soluble in water, dissolved when heat, solution is strongly alkaline. Easily deliquescence agglomeration in the air, absorb CO2 and produce sodium bicarbonate. Monohydrate as a fine white crystal or powder, the relative density of 1.55. Stable at room temperature and heated to lose crystal water becomes anhydrous at 100 ºC. Decahydrate colorless transparent crystallization temperature 34 ºC, relative density (20 ºC) 1.44, in the air easily weathered.
6,Usage: It is one of the important chemical raw materials used in making chemicals, cleaning agents, detergents, but also for photography and manufacturing pharmaceuticals products.
7,Packing: It is packed with polythene bag as the inner layer, and a compound plastic woven bag as the outer layer. The net weight of each bag is 25kg.
8,Storage and Transport: It should be stored in a dark, dry and ventilative warehouse, kept away from water and moisture; unloaded with care to avoid damage. Furthermore, it must be stored separately from poisonous substances.
119883 Soda Ash (Dense Light) Suppliers
Short on time? Let Soda Ash (Dense Light) sellers contact you.
Product Description: "This product is one of Sebchem Key products
Some of our direct/ Indirect clients are ARAMCO, ADNOC, SCHLUMBERGER, BAKER HUGHES, CLARIANT, CHAMPION, GE, SUEZ, METITO, ECOLAB, MAPEI, SIKA, ARAMCO REFINERIES, SCOTT BADER, SYNTHOMER, IFFCO.
Sebchem providing its chemicals to our global clients in the Oil & Gas Upstream Oil & Gas Downstream, Petrochemicals, Industrial, Water Treatment, Construction, Detergent, Coating & Resin, Agro, Textile, Food. We supply chemicals IBCs, Drums, ISO Tanks, Bags, and up to Bulk Vessels"
Price of product ( USD price or FOB price): USD
Product origin: Multiple
Key Specifications/Special Features: "This is one of Key products of Sebchem given to Sebchem clinets across the World. Please contact our sales team or via our website for getting TDS, SDS, COA
"
Light Soda Ash is an important basic industrial alkali chemical used in soap and detergents, pulp and paper, iron and steel, aluminum cleaning compounds, water softening and dyeing, in fiber reactive dyes, effluent treatment and production of chemicals
Soda ash light, also known as light soda ash or sodium carbonate, is a chemical compound with the chemical formula Na2CO3. It is an essential industrial chemical used in various applications. Here are some key points about soda ash:
Chemical Composition: Soda ash consists of two sodium (Na) atoms, one carbon (C) atom, and three oxygen (O) atoms, arranged in a specific molecular structure.
Appearance: It typically appears as a white, odorless powder or granules. The â??lightâ?? in its name refers to its relatively low density compared to the dense or heavy variant of soda ash, which is known as soda ash dense.
Production: light Soda ash is primarily produced through a chemical process known as the Solvay process. This process involves the reaction of sodium chloride (table salt), ammonia, and limestone (calcium carbonate) to produce sodium carbonate.
1. Chemical industry. 2. Metallurgical industry. 3. Ceramic industry. 4. Glass industry. 5. Food industry. 6. Pharmaceutical industry. 7. Printing and dyeing industry: used as soft water agent. 8. Leather industry: used for degreasing raw leather, neutralizing chrome tanned leather and improving the alkalinity of chrome tanning solution.
1. Chemical industry: used for preparing sodium salt, metal carbonate, bleach, filler, detergent, catalyst and dye. 2. Metallurgical Industry: used to remove sulfur and phosphorus, beneficiation and production of copper, lead, nickel, tin, uranium, aluminum and other metals. 3. Ceramic industry: used for making refractory materials and glazes. 4. Glass industry: This is a large consumption field of soda ash. 0.2 tons of soda ash is consumed per ton of glass, which is mainly used for float glass, kinescope glass shell, optical glass, etc. 5. Food industry: as neutralizer and bulking agent, such as amino acids, soy sauce and flour foods, such as steamed bread, bread, etc. It can also be prepared into alkaline water and added to pasta to increase elasticity and ductility. Sodium carbonate can also be used to produce monosodium glutamate. 6. Laxative: Industrial laxative. 7. Printing and dyeing industry: used as soft water agent. 8. Leather industry: used for degreasing raw leather, neutralizing chrome tanned leather and improving the alkalinity of chrome tanning solution.
Sodium carbonate (also named washing soda, soda ash and soda crystals, and in the monohydrate form as crystal carbonate), Na2CO3, is the water-soluble sodium salt of carbonic acid.
Pure sodium carbonate is white, odorless powder that is hygroscopic (absorbs moisture from the air). It has a strongly alkaline taste, and forms a moderately basic solution in water.
Soda Ash has number of uses. Glass manufacturing is the largest application for soda ash, in the form of containers, fiberglass insulation, commercial building, and automotive industries.
Three grades of soda ash produced:
1. Dense Soda Ash: is an anhydrous substance. It forms an important industrial chemical, and widely used in the manufacture of different products.
2. Light Soda Ash: widely used as a pH regulator/ buffering agent in multiple industrial processes.
3. Washing soda: is an anhydrous substance that is produced by combining light soda ash along with additional molecules of water. It is used in soaps and washing detergents to improve their cleaning properties.
Soda ash also used to clean the air and soften water. As environmental concerns grow, demand increases for soda ash used in the removal of sulfur dioxide and hydrochloric acid from stack gases. Chemical producers use soda ash as an intermediate to manufacture products that sweeten soft drinks (corn sweeteners), relieve physical discomfort (sodium bicarbonate) and improve foods and toiletries (phosphates).
We are supplier for detergents materials such:
. Sodium silicate 100%
. Sodium carbonate [soda ash]
. Sodium tripolyphosphate [STPP] RUSSIA ORIGIN
. sodium sulfate 98.3%
. High foam powder semi detergent 12%
. Color SPECKLES on red/green/blue.
. High foam powder laundry 30kg/bag
. Sodium Metasilicate Pentahydrate.
. Sodofix for glaze of ceramics alternative of soda ash sodium silicate.
We offer cash and credit , all of the products always available continuously.
Soda ash, also known as sodium carbonate, is an odorless, white powder that is stable, not toxic, explosive, or flammable. There are three grades of soda ash that are produced: dense soda ash, light soda ash, and washing soda. Dense soda ash is an anhydrous substance that is widely used in the manufacture of different products. Light soda ash is widely used as a pH regulator/buffering agent in multiple industrial processes. Washing soda is an anhydrous substance that is produced by combining light soda ash along with additional molecules of water. It is mostly used in soaps and washing detergents to improve their cleaning properties.
Soda ash is used for numerous chemical reactions due to its high solubility. It is mostly used as an ingredient in the manufacture of dyes and coloring agents, synthetic detergents, and fertilizers. It is also an important chemical agent used in enameling and petroleum industries. Sodium carbonate is used to improve and treat the alkalinity of lakes that have been affected by rain. It is also used to reduce the acidity of emissions being generated from a power plant. Soda ash is replacing phosphates that were earlier being used in a number of household detergents. Many other cleaning products such as dishwashing soaps also contain varying amounts of soda ash in their formulations. Sodium carbonate is used to remove or de-clarify phosphates and sulfurs from a number of non-ferrous and ferrous ores. It is also used in recycling of aluminum and zinc. Soda ash is an important ingredient in the manufacture of glass, since it helps reduce silicaâ??s melting point. It is also a common addition to spa and pool treatment chemicals helping in reducing the acidity in water. Soda ash is also used in manufacture and sealants and glues, preparing pulp in paper manufacture, and sometimes in soil preparation as well.
Supplier of High Quality Soda Ash (Sodium Carbonate) Light and Dense from Turkey and Dubai
Industrial Uses
Glass Manufacturing :
Sodium Carbonate is a key ingredient in the production of glass. It helps reduce the melting temperature of silica, making the process more energy-efficient. It is used in the manufacturing of flat glass, container glass, and other glass products.
Detergents and Soaps :
Soda ash acts as a builder in detergents, enhancing the effectiveness of the surfactants by softening the water. It is also used in the production of soap.
Water Treatment :
Soda ash is used to adjust the pH of water, making it less acidic. This is important in municipal water treatment plants and for maintaining the balance in swimming pools.
Pulp and Paper Industry :
Used in the pulping process to separate cellulose fibers and as a bleaching agent in paper production.
Chemical Manufacturing :
Soda ash is a raw material for the production of numerous chemicals, including sodium bicarbonate (baking soda), sodium silicate, sodium tripolyphosphate, and others.
Textile Processing :
Used in the dyeing and processing of cotton and other fabrics, soda ash helps to fix dyes to fibers and adjust pH levels in textile processes.
Metal Refining :
Soda ash is used in the extraction of metals such as copper, zinc, and lead from their ores.
Food Industry :
Used as a food additive (E500) to regulate acidity and as a leavening agent in baking.
Packing of Soda Ash Light and Dense
1250kg Jumbo bag
50kg bag
Sodium carbonate, Na2CO3, is the water-soluble sodium salt of carbonic acid. It most commonly occurs as a crystalline heptahydrate, which readily effloresces to form a white powder, the monohydrate.
Formula: Na2CO3
Molar mass: 105.9888 g/mol
Melting point: 851 °C
Density: 2.54 g/cm³
Boiling point: 1,600 °C
Soluble in: Water
Chemical name: anhydrous sodium carbonate (na2co3)
Manufacturing process: solvay ammonia process
Technical data UM Value
Aspect appearance white powder
Na2CO3 content % min. 99.0
Na Cl content % max. 0.5
Fe2O3 content % max. 0.004
Insolubles in water %max. 0.08
Density Kg/dm3 0.5 - 0.6
Application:
Glass, detergent and soap, textiles, metallurgical, pharmaceuticals, pulp and paper, rubber, leather chemical and petrochemical industries, for water softening.
Packing and delivery:
• Polyethylene bags repacked in polypropylene bags of 50 kgs +/- 1% net weight
• Sew closed polypropylene bags, 25 or 50 kg +/- 1% net weight
• Big bags, 500 or 1000 kg net weight
• 25 or 50 tons silowaggons ( in bulk )
• Possibility of bags packaging in shrinking foils
• Possibility of bags palletising on wood pallets
Handling:
Bags should not be thrown from distances higher than 0.75 m in horizontal position and 0.03 m in vertical position.
Storage:
The product being hygroscopic, storage should be made in dry area or closed silos.
Dense and Light Sode Ash Chemical Specifications
NO Characteristics Range
1 Alkalinity ( as Na 2C O 3) %
2 Chloride in term of NaCL%
3 Iron ( Fe+2) %
4 Insolubility in water %
Dense and Light Sode Ash Physical Specifications
NO Characteristics Range
1 Bulk Density ( Dense),gr/cm 3 1-1.05
2 Bulk Density ( Light),gr/cm 3 0.6-0.7
Dense Granular
3
Mesh NO. %
200
>70 25-50
70-20 65-85
< 20 20-1
10 0
119883 Soda Ash (Dense Light) Suppliers
Short on time? Let Soda Ash (Dense Light) sellers contact you.
