Global Tech GFP EoP, Ethernet over PDH, Interface Converter can transport GFP encapsulated Ethernet service over 1 up to 16 E1 channels. Fully comply with G.7041, G.7042, G.7043, and G.8040 recommendations, GFP Interface Converter can cooperate with the products from other manufactures adopted the same recommendations.
GFP Interface Converters can transform traffic between E1 interface and Ethernet interface, and utilize current adequate E1 resources to extend the Ethernet transmission distance and coverage range without any network reformation.
Feature
* GFP encapsulation based Ethernet interface can cooperate with other vendors GFP based Ethernet equipments.
* Up to 4 Ethernet interfaces.
* Switching Ethernet interfaces isolation is configured by E1 channel or 802.1Q through NMS, disabled by default.
* Automatically Fault Shifting function.
* Support Telnet/Web browser/SNMP NMS management. Strong NMS function to support client managing in complicate topology.
Technical Parameter
* E1 Interface
- Bit Rate: 1.984M bps
- Coding: HDB3
- Impedance: 75, Unbalanced/ 120, Balanced
- Port Feature: G.703 and G.704
- Connector: Q9 (75)/ RJ45 or RJ48-C (120)
* Ethernet Interface
- 10M/100M auto negotiation
- Full/half duplex auto negotiation
- Port Quantity: 1, up to 4 ports
- MDI/MDIX auto negotiation
- Related Standard: G.7041, G.7042, G.7043, G.8040
* Operation Environment
- Working Temperature: -10~ 55
- Storage Temperature: -40~ 70
- Relative Humidity: 5%~ 95%, non-condensing
- No corrosive and solvent gas, no dust and heavy EMI
- Power Supply:
AC 180~ 260V, Desktop,
DC -72~ -36V, Chassis
- Support 1+1 dual power supply in chassis configuration
Apex APX 1KM Smart Inverter 12V 60A MPPT
Nominal Output Power 1000 Watt
Villa
Output Waveform
Pure Sine Wave
Detached House
Output Voltage
230V
Container
Output Frequency
50Hz-60Hz
Tiny House
Efficiency
99%
Bungalow
DC Input Voltage
12V DC
Office and Businesses
MPPT
60A
Commercial Enterprises
Rated Power
1000 Watt
Milk Milking Units
Maximum PV Input
800 W / 50V DC
Beekeepers
Operating Temperature
0- 40 Degrees
Noise Level
45dB
Warranty
2 Years
What is a Smart Inverter?
A smart inverter goes beyond traditional inverter functions; it features two-way communication with the grid, remote monitoring/configuration, energy optimization, load management, and advanced protection capabilities.
Traditional inverter: Only converts DC to AC.
Smart inverter: In addition to conversion, it provides greater control and data over grid and/or battery management through advanced software and hardware integration.
Especially preferred in renewable energy installations (solar, wind), grid-tied (on-grid), or hybrid systems to increase energy efficiency and reliability.
What Does It Do?
Two-Way Communication and Control
Interacts smartly with the grid: monitors grid voltage, frequency, and power demands, adjusts reactive power when necessary.
Remote access allows viewing, updating, and managing operating parameters without being on-site.
Energy Management and Optimization
Automatically manages battery charge/discharge for optimal efficiency.
Real-time system optimization based on production-consumption balance,
Advanced Protection and Fault Diagnosis
Ensures safe shutdown during sudden grid failures or fluctuations (e.g., anti-islanding).
Sends automatic alerts and records data during faults.
Remote Monitoring and Reporting
Provides real-time production, consumption, charge-discharge, temperature, etc. data via mobile app or web interface.
Reports allow long-term performance evaluation.
How Does It Work?
Input Stage (DC or Grid)
Can accept DC input from solar panels or wind turbines.
Designed also to manage energy coming from the grid (AC).
Energy Conversion and Monitoring
Converts DC power to AC while simultaneously performing real-time measurements with built-in sensors and software algorithms.
Monitors grid parameters (voltage, frequency), panel/battery voltage, temperature, etc., to find the optimal operating point.
Battery Management (In Hybrid Models)
Communicates with the Battery Management System (BMS) if a battery bank is present
Adjusts charge/discharge strategy based on instantaneous consumption, grid constraints, energy tariffs, or weather forecasts.
Communication Interfaces
Uses protocols like RS485, Wi-Fi, Ethernet, ZigBee to record, monitor, or control inverter data.
Grid operators or users can remotely access the inverter for updates or setting changes.
Grid Interaction
Real-Time Power Adjustment: Balances power fed to or drawn from the gr
1, before commissioning must ensure that the pump and pipeline full of water, so as not to damage the pump.
2, the pump is filled with water to open the pump bleeder valve for exhaust, so as not to cause unstable pipeline pressure can not be normal pressure regulation.
3, the cabinet door on the surface of the manual stop automatic transfer switch, hit the manual for the frequency start, automatic inverter start by the outlet pipe remote pressure gauge according to the set pressure automatic control.
4, due to manual and automatic power supply into the line is not the same, so the manual and automatic pumps are not the same, all pumps to work manually are adjusted to the positive, automatic reversal of the frequency converter output on the U2, V2, W2, any two-phase switching can be.
5, set the pressure to stop the pump (i.e., the maximum pressure) just press (ENTER) on the inverter panel into the display (REF) and then press (ENTER) into the display of 40% (i.e., 0.4MPa pressure), such as the need to increase and decrease the pressure according to the (Increase key) or (Decrease key) to set the required pressure value (i.e., the pressure stop the pump), set the value of the pressure and then press (ENTER) to save, then the After setting the pressure value, press (ENTER) to save it, and then press (EXIT) to return to the main interface to complete the setting; the pump pressure is based on the highest pressure to be converted by itself without setting.
Formatters
Random
Regex
Text
More
Boost your career. Start a 10-day free trial at Pluralsight.
Regex Tools
Remove Special Characters
Remove Special Characters
The tool can be used to remove special characters from text. More.
Input | Keep alphanumeric & spaces only
299 char(s)
Type Honey mango
Taste soft sour and sweet
Shelf life at least 12 months
Origin Ho Chi Minh City Vietnam
Process Air Dry with 15 sugar
No other preservatives additives non SO2
Quantity capacity 50 tonsmonth Min order quantity no
Packaging in 10kgs carton 1x20ft 135mts buyers brand available
Output
299 char(s)
Type Honey mango
Taste soft sour and sweet
Shelf life at least 12 months
Origin Ho Chi Minh City Vietnam
Process Air Dry with 15 sugar
No other preservatives additives non SO2
Quantity capacity 50 tonsmonth Min order quantity no
Packaging in 10kgs carton 1x20ft 135mts buyers brand available
This is a client-side utility. Your data will NOT leave your own browser.
Copy shareable link is limited to 5,000 characters as it uses a client-side feature.
How it works?
Remove Special Characters online: The tool can be used to remove special characters from text.
Keep alphanumeric & spaces only: Remove all non-alphanumeric & and non-spaces characters from the text.
Keep alphanumeric only: Remove all non-alphanumeric characters from the text.
Keep numeric & spaces only: Remove all non-numeric & non-space characters from the text.
Keep numeric-only: Remove all non-numeric characters from the text.
Keep ASCII only: Remove all non-ASCII characters from the text.
See the examples of usage below.
Examples
Input (Keep alphanumeric & spaces only)
!#This tool removes $special *characters* /other/ than! digits, characters and spaces!!!$
Output (Keep alphanumeric & spaces only)
This tool removes special characters other than digits characters and spaces
Tutorials
How to remove special characters from text
Follow these steps to quickly delete unwanted symbols from the input.
Prepare your text
Have your text with unwanted characters ready.
Enter the data
Paste your data or load the file into the input area.
Select the option
Click on the "Options" and select the desired character set you want to keep.
Submit
Click the "Submit" button. You should now see the clear text output.
All done
Your data is ready. Click the "Copy to Clipboard" button and you should be ready to rock!
Additional Resources
Alphanumeric characters - Wikipedia
Remove special characters using JavaScript - HowToBits.com
Related tools
Extract emails from text
Extract URLs from text
Hashtag Extractor
IP Extractor
Looking for something else?
In case you are looking for something else than this functionality, please let us know by contacting us. The most common requests will be made available (for free) once possible.
Share the word
Text-Utils.com is one of the most powerful, secure and free websites containing various tools for helping with your daily tasks, such as online formatters (XML, JSON, SQL and HTML), encoding (Base64, Hashes), converters (binary, XML, JSON), multiple text tools, such as to remove duplicate lines, extract text and much more. Enjoy all for free!
Gve(e1, g.703 to v.35, v.24 converter)
Detailed selling lead description
Features:
1) v-gve is an asic-based converter using one e1/g.703 to convert to v.35
2) can convert successive n x 64k (n=1-32) data stream into pcm signal of e1, the data rate is up to 2048kbps
3) placed in e1 frame, data user just needs necessary timeslot
4) setting timeslot is continuous and according to rate of data port
5) the data ports have v.35 and v.24/rs232c which are optional
6) the ports support external clock and become linking end line
7) v-gve satisfies the requirements of g.703, g.704&g.706 of itu
8) v-gve has local and remote loop backs. Therefore user can use circuitry-test and malfunction diagnose conveniently
Detailed product description
Features:
1) rate of data transition: n x 64kbps (n=1-31), 2, 048kbps
2) transmission mode: synchronization
3) line interface: impedance 75 ohm, physical interface bnc; impedance 120 ohm, physical interface rj45
4) transmission features: comply with g.703
5) clock: line; external
6) testing method: local analogy loopback, remote digital loopback
7) dce interface: v.35 or v.24/rs232c
8) power supply: 220v f+ 10%, 50hz; 48v dc (optional)
9) power consumption: 5w
10) volume (l x w x h): 225 x 145 x 40mm; 9" x 5.8" x 1.6"
11) temperature: 0 - 40fpc
12) humidity: 0~95%
783 Snmp Telnet Web Browser E1 Interface Converter Suppliers
Short on time? Let Snmp Telnet Web Browser E1 Interface Converter sellers contact you.
GVE-Tplus(E1/G.703 to V.35 Ehernet converter
Detaile Selling Lead Description
Features:
1) GVE-T plus can convert E1 to both V.35 interface and LAN interface
2) Bandwidth of every port can be set into N x 64kbps (N=1-31) continuous data stream, although the total bandwidth of the two ports must be no more than 31 and must be inserted into PCM time slot of E1. It supports choices of CRC4 on/off and CAS/CCS (30 & 31 time slot)
3) GVE-T plus also can distribute the whole E1 capacity to V.35 data interface, although E1 must be framed N x 64kbps (N=1-31). The work mode can be either internal clock and slave-clock, or N x 64kbps (N=1-31) external clock to achieve end- linking line
4) GVE-T plus can be set up into long-range Ethernet Bridge from V.35 to LAN interface
5) GVE-T plus has two transmission modes to choose from: data and image
6) GVE-T plus has local and remote loop backs. Therefore user can use circuitry-test and malfunction diagnosis conveniently to perform port-to-port integrity test
Detailed Product Description
Ethernet features:
1) LAN table: 10,000 automatic learning and updating
2) Filtering and forwarding: 30,000 frames / second
3) Buffer size: 64M
4) Throughput delay: 1 frame
5) VLAN: comply with 802.1Q
LAN feature:
1) Standard: conforms to IEE802.3 / Ethernet
2) Work mode: full duplex / half duplex
3) Data rate: 10Mbps
4) Physical interface: 10 BaseT (UTP), shielded RJ-45
5) WAN E1 / G.703 feature:
6) Line transmission rate: N 64Kbps (N=1-31) 2048Kbps
7) Line coding options: HDB3
8) Format of line frame: G.703 (framed / unframed)
9) Line interface: BNC; RJ45
Transmission features:
1) Comply with G.703
2) Rate of data transmission: N 64Kbps (N=1-31)
3) Transmission mode: synchronization
4) Data interface: V.35 or V.24 / RS232C DCE
5) Clock: master clock; slave clock; external clock
6) Testing methods: local analogy loopback test; remote digital loopback test
Feature:
1) Power supply: 220VACf+10%, 50Hz 48V DC (optional)
2) Power consumption: 5W
3) Volume: 225 x 145 x 40mm; 9" (L) x 5.8" (W) x 1.6" (H)
4) Temperature: 0 - 40fpC
Digital to Analog Converters - DAC QUAD 16-BIT +/-15V DAC
Resolution: 16 bit
Sampling Rate: 1.26 MS/s
Number of Channels: 4 Channel
Settling Time: 8 us
Output Type: Voltage
Interface Type: 3-Wire
Analog Supply Voltage: +/- 11.4 V to +/- 16.5 V
Digital Supply Voltage: 2.7 V to 5.25 V
Minimum Operating Temperature: - 40 C
Maximum Operating Temperature: + 85 C
Package / Case: TQFP-32
Number of Converters: 4 Converter
Pd - Power Dissipation: 381 mW
FPG:250PCS
Supply Voltage - Max: 16.5 V
Supply Voltage - Min: 11.4 V
Subcategory: Data Converter ICs
Formatters
Random
Regex
Text
More
New: Boost your productivity. Get our free Chrome extension.
Regex Tools
Remove Special Characters
Remove Special Characters
The tool can be used to remove special characters from text. More.
Input | Keep alphanumeric & spaces only
528 char(s)
Hand tufted from 100% New Zealand Wool. Pile height varies between 10 - 12 mm which means its supremely cozy to lounge and walk on.
New Zealand Wool
Hand-Tufted
W 5\' x L 8\'
Patterned Rug
Rug Thickness : 10 - 12 mm
CleaningÃ? : Do not wash. We recommend gently vacuuming this rug once or twice weekly with a brush attachment. Do not use an abrasive rotary brush head as this may damage to the rug.
Stain RemovalÃ? : Wipe the stain carefully with a mixture of lukewarm water. Absorb excess liquid with a dry microfiber cloth.
Output
508 char(s)
Hand tufted from 100 New Zealand Wool Pile height varies between 10 12 mm which means its supremely cozy to lounge and walk on
New Zealand Wool
HandTufted
W 5 x L 8
Patterned Rug
Rug Thickness 10 12 mm
Cleaning Do not wash We recommend gently vacuuming this rug once or twice weekly with a brush attachment Do not use an abrasive rotary brush head as this may damage to the rug
Stain Removal Wipe the stain carefully with a mixture of lukewarm water Absorb excess liquid with a dry microfiber cloth
This is a client-side utility. Your data will NOT leave your own browser.
Copy shareable link is limited to 5,000 characters as it uses a client-side feature.
How it works?
Remove Special Characters online: The tool can be used to remove special characters from text.
Keep alphanumeric & spaces only: Remove all non-alphanumeric & and non-spaces characters from the text.
Keep alphanumeric only: Remove all non-alphanumeric characters from the text.
Keep numeric & spaces only: Remove all non-numeric & non-space characters from the text.
Keep numeric-only: Remove all non-numeric characters from the text.
Keep ASCII only: Remove all non-ASCII characters from the text.
See the examples of usage below.
Examples
Input (Keep alphanumeric & spaces only)
!#This tool removes $special *characters* /other/ than! digits, characters and spaces!!!$
Output (Keep alphanumeric & spaces only)
This tool removes special characters other than digits characters and spaces
Tutorials
How to remove special characters from text
Follow these steps to quickly delete unwanted symbols from the input.
Prepare your text
Have your text with unwanted characters ready.
Enter the data
Paste your data or load the file into the input area.
Select the option
Click on the "Options" and select the desired character set you want to keep.
Submit
Click the "Submit" button. You should now see the clear text output.
All done
Your data is ready. Click the "Copy to Clipboard" button and you should be ready to rock!
Additional Resources
Alphanumeric characters - Wikipedia
Remove special characters using JavaScript - HowToBits.com
Related tools
Extract emails from text
Extract URLs from text
Hashtag Extractor
IP Extractor
Looking for something else?
In case you are looking for something else than this functionality, please let us know by contacting us. The most common requests will be made available (for free) once possible.
Share the word
Text-Utils.com is one of the most powerful, secure and free websites containing various tools for helping with your daily tasks, such as online formatters (XML, JSON, SQL and HTML), encoding (Base64, Hashes), converters (binary, XML, JSON), multiple text tools, such as to remove duplicate lines, extract text and much more. Enjoy all for free!
Nonwoven fabrics are broadly defined as sheet or web structures bonded together by entangling fiber or filaments (and by perforating films) mechanically, thermally or chemically. They are flat or tufted porous sheets that are made directly from separate fibres, molten plastic or plastic film. They are not made by weaving or knitting and do not require converting the fibres to yarn. Typically, a certain percentage of recycled fabrics and oil-based materials are used in nonwoven fabrics. The percentage of recycled fabrics varies based upon the strength of material needed for the specific use. In addition, some nonwoven fabrics can be recycled after use, given the proper treatment and facilities. For this reason, some consider non-woven a more ecological fabric for certain applications, especially in fields and industries where disposable or single use products are important, such as hospitals, schools, nursing homes and luxury accommodations.
USES IN-
isolation gowns
surgical gowns
surgical drapes and covers
surgical masks
surgical scrub suits
caps
medical packaging: porosity allows gas sterilization
gloves
shoe covers
bath wipes
wound dressings
AC to DC converter battery charger 150-1000VDC rectifier 120KW power supply
Product Introductionï¼?
SANDI AC/DC Charger is specially developed for DC chargers. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase, DC output voltage range from 150 to 1000VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger.
Unique function
High efficiency over the full load range, full load efficiency greater than 95%
Wide output voltage range, 150-1000VDC, suitable for a wide range of Lithium or lead acid battery
5-inch LCD touch screen, easy to operate
Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate
Main featuresï¼?
Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc.
Wide input voltage range: 260~ 530Vac, adaptable to various power grid environments
Three-phase AC input without neutral wire: Simplifies system design, eliminates the risk of excessive neutral current, and reduces system costs.
Dual DSP design, achieve the full digital control, less components means high reliability
Wide input voltage range, allows operation in most poor grid conditions
Battery anti backflow: effectively protects the battery while ensuring reliable and safe operation of the system
Input, output have protective circuit breaker switch
Module adopts hot pluggable design, which is convenient for maintenance.
RS485 interface (Optional)
Interface converter
Introduction:
Ne2701bridge (also called 2mbps g.703 / ethernet interface converter) serves as a type of data communication equipment to transparently and directly convert the transmit data from 2m g.703 interface into ethernet. It is ideal for the case where low-cost bridging is required. It also can be used as a lan extension. When used as extension or segment switch, it has two working status, namely filtering and non-filtering, to determine whether all communication traffic is allowed to transport to wan circuit or not.
Main features:
(1 e1interface
(1 utp interface, for connection to network card or hub
(optional clock: internal clock (master mode); receiving and recovering clock
(complete alert and status display
Max throughput: Base: 1Gbps (load balancing), 450 Mbps (standalone) , 250 Mbps (peered). Higher performance available in Truffle E, EC, EF models.
Max number of concurrent IP sessions: 150,000 (1,000,000 with Truffle E, EC, EF, EX models).
Device management: Cloud based, SNMP, Remote Syslog, Email alerts.
DHCP and DNS servers: DNS relay, Parallel DNS optimization, DHCP server.
DDNS: Support for dynamic DNS for multiple interfaces
WAN Configuration: Static IP, PPPoE, DHCP or passthrough. Failover-only or aggregate modes for cellular and other WAN ports. Interface binding.
Routing: NAT and IP forwarding, QoS and inbound/outbound VOIP quality management
Support 10/100m remote manageable fx media converters, 10/100/1000m remote manageable fx media converters, 1 fx + 2 RJ45 ethernet media converter, 125m~4.25g oeo, and 10g oeo managed at the same time
Cover all functions of common fiber media converters, what's more, it supports protocols like snmp, web, telnet and console
They can realize the integrated management to all chassis.
Media converter card supports protocols like q-in-q double tag vlan, ieee802.1q tag vlan and ieee802.3x flow control
Interface for management: rs232 console port (RJ45) and 10/100mbps RJ-45 ethernet port.
Supporting remote and local management.
With centralized management and top tree, several chassis can be managed in the same interface at the same time; with grouping management any converter can be conveniently manipulated among many converters.
GVE-Tplus is E1 to V.35/V.24/RS232 and Ethernet Converter. Other series interface RS449/RS530/X.21 also can be optional. E1 port can support BNC/75ohm and RJ45/120ohm optional.
This device provides an economical digital access solution for E1 and fractional E1 network services. With a adapter cable, the device can connect to other DTE device, such as router, at data rates of 64Kbps to 2048Kbps.User data is placed into the E1 frame, using only the required number of timeslots, timeslot assignment is accomplished according to the data port speed and manual setting of DIP switches. The V.35 or V.24/RS232 and Ethernet share the 2Mbps bandwidth, the total bandwidth of the 2 interfaces must be not more than 1984Kbps.GVE-Tplus is widely used in communication network, both in WAN and LAN connection field.
Features:
*Comply with ITU V.35, G.703, G.704, G.706, G.823
*Full comply with IEEE 802.3 /IEEE 802.1Q (VLAN)
*Framed (N*64Kbps) and unframed (2.048Mbps) optional
*Ethernet port 10Mbps, Full/Half Duplex mode compatible
*Frame mode support PCM30/PCM31
*Support CRC4
*Support internal clock, E1 recovery clock or V.35 line clock
*Provide analog and digital loopback and remote digital loopback test
*For E1 interface, 75ohm (unbalanced) and 120ohm (balanced) optional
*For data interface, V.35 and V.24/RS232 optional
*Comprehensive LED indicators on front panel, convenient for the diagnosis of equipment working state
*Stand-Alone and Rack-Mount available
*16-slots, elaborate cooling design and two redundant power supplies
*Support management
*-48V DC & 220V AC power supply optional
Specifications:
E1 & FE1 interface
Comply with ITU G.703,G.704,G.706,G.823
Rate:2.048Mbps;N*64Kbps(N=1~31)
Code type:HDB3
Impedance:75ohm unbalanced & 120ohm balanced optional
Physical interface:BNC coaxical for unbalanced
RJ45 twisted pair for balanced
V.35,V.24/RS232 interface
Comply with V.35,V.24/RS232 standard
Rate:2048Kbps;N*64Kbps(N=1~31)
Transmission mode:Synchronization
Data interface:V.35 or V.24/RS232
Physical interface:DB25 female jack,V.35 via external adapter
Work mode:DCE
Power supply
AC power:220V¡¨¤10%,50Hz
DC power:-48V(optional)
Power:5W
GVE-Tplus is an upgrade of GVE-T. It is based on the ASIC circuitry design technology. It is a multi-functional, multi-purpose E1/G.703 to V.35 and LAN three-in-one multiplexer, which is also knowns as the three-in-one interface converter.
GVE-Tplus can not only be set up into GVE-T, but also can distribute the whole E1 capacity to V.35 data interface, although E1 must be framed N*64Kbps(N=1--31). The work mode can be either internal clock and slave-clock, or N*64Kbps(N=1--31) external clock to achieve end-linking line.
GVE-Tplus can be set up into long-range Ethernet bridge from V.35 to LAN interface. With low cost, it is suitable for use in bridge connection which is sensitive to cost or use in LAN as a stretcher or subsection. It can learn automatically MAC address in the connected LAN and only transmit the aim address to frame in another LAN. There are more than 10000 addresses in its LAN table. And they can be updated automatically. The highest speed of filtrating and transmission is 30000 frame/second(line speed). The buffer size is 64M. The throughput delay is 1 frame. When it is used as a stretcher or subsection, it can forbid filtration so that all traffic can be broadcasted in WAN. 10baseT interface can run in full duplex Ethernet with topology and improve data throughput by eliminating filled blanks in the 64 bytes frames. Without any negotiation in V.35 port, it is specially suitable for use in satellites and other wireless broadcast.
Salient Features
Operator friendly graphical user interface controlled via a PLC.
Pouch style options Bottle Shape, Stand-up with size nozzle, Pillow Shape with self closing valve, Stand-up with self closing valve
Web Edge control and guide system
Thermic seal
Specially designed film roll unwinding mechanism for smooth bag pulling by servo motors and control cards
Independent operation for sealing & film feed operations for optimum performance
Gazetted bags and pouches in a vertical form fill seal machine
Bag unwinding by pressure rubber rollers coupled with special servo motors and control cards
Suitable for different range of packaging film i.e. PE based film with different laminates
Machine operation on Electro â??Mechanical Principle.
Optional Features
Water Chiller
Inert Gas Flushing System
Conveyor
String Attachment Device
Metal Detection conveyors
Date Coding System
Extra Magazine Shaft
UV sterilisation of packaging film
C.I.P cleaning provision for Milk Packing
Special sealing card to control sealing
End of film roll facility with parking mode interlock
Safety card for protection of electrical/electronics equipment
Positive displacement pump filler with fine quantity adjustment facility.
Equipped with variable speed drive for flexibility to offer adjustable output for the machine
Door Safety sensor
SS Body
Two 10/100m electrical ports, one single-mode or multi-mode optical port
Multi-mode transmission distance: 2km, single-mode transmission distance: 120km, single-strand double-directions /double-strand double-directions.
Set - in 1m cache, supporting 2k mac address self-learning and self-updating capability
Supports forcible execution the cross of 10m, 100m, full-duplex, half-duplex, twisted-pair and automatically adapt to connect auto mdix function directly
Supports rate control function and the rate can been controlled between nx64k (n=1~1600) to 100mbps
Supports renovate system automatically function, support system regular refresh automatically via setting time, protect from system halted
Supports management based on web, snmp, telnet or local console
Supports lld(search disconnected link automatically), llr(return alarm message when disconnected link found)
Supports llcf(report the disconnected alarm message to local network administration)
Detect and control the operational states of electrical port and optical port of the near end and the far end via interface of management
Supports open or close electrical and optical ports through via the far end network management
Supports legal maximum packet size up to 1912 bytes, support cisco, isl and vtp
Physical property:
Input power: ac 100v~220v or dc 48v
Dimension: 191mm x 110mm x 25mm
Environment requirements:
Operating temperature: 0¦-50¦
Storage temperature: -40¦-70¦
Environment humidity: 5-90%(non-condensing)
Overview:
Dhodt-eoc is a converter for stm-1 converter electrical and optical interface conversion. It is designed for the pdh equipment coaxial interface and optical interface interconnect.
Dhodt-eoc is an interface converter for stm-1 electrical and optical interface conversion.It is designed for the sdh equipment coaxial interface and optical interface interconnect, as well as the atm 155.520 mbps interface and sdh device interconnection.
Complete loopback facility is supported for system diagnostic and commissioning.Compact casing and simple operation achieve the cost saving and investment protected.
Features:
1. High reliability, comply with itu-t g.703 and g.957
2. Single fiber bi-directional is selectable
3. State-of-the-art design, ensure normal working under different environment.
4. Supports local and remote loop-back on electrical or optical interface for system diagnostic.
5. Suitable for sdh and atm 155.52 mbps interface interconnection.
6. Simple operation and maintenance
7. Compact design and low power consumption.
Specifications:
Electrical interface
Standard:itu-t g.703 compliant
Data rate:155.52 mbps
Line code:cmi
Physical connector:bnc coaxial
Optical interface
Standard:itu-t g.957 stm-1
Bit rate:155.520 mbps
Coding:nrz
Connector:sc
Light source:laser diode
Wave length:1310nm (typical), or 1550nm (optional) or single
Fiber bi-directional (optional)
Transmit power:-12dbm (1310nm) / -5dbm (1550nm)
Receive sensitive:-36dbm (1310nm) / -38dbm (1550nm)
Power supply
Ac 220v10%, 50hz
Dc¡¡ìc48v (optional)
Consumption:5w
