Changzhou Bell Data Communication Equipment Co., Ltd.

Overview:
Dhodt-eoc is a converter for stm-1 converter electrical and optical interface conversion. It is designed for the pdh equipment coaxial interface and optical interface interconnect.

Dhodt-eoc is an interface converter for stm-1 electrical and optical interface conversion.It is designed for the sdh equipment coaxial interface and optical interface interconnect, as well as the atm 155.520 mbps interface and sdh device interconnection.
Complete loopback facility is supported for system diagnostic and commissioning.Compact casing and simple operation achieve the cost saving and investment protected.

Features:
1. High reliability, comply with itu-t g.703 and g.957
2. Single fiber bi-directional is selectable
3. State-of-the-art design, ensure normal working under different environment.
4. Supports local and remote loop-back on electrical or optical interface for system diagnostic.
5. Suitable for sdh and atm 155.52 mbps interface interconnection.
6. Simple operation and maintenance
7. Compact design and low power consumption.

Specifications:
Electrical interface
Standard:itu-t g.703 compliant
Data rate:155.52 mbps
Line code:cmi
Physical connector:bnc coaxial

Optical interface
Standard:itu-t g.957 stm-1
Bit rate:155.520 mbps
Coding:nrz
Connector:sc
Light source:laser diode
Wave length:1310nm (typical), or 1550nm (optional) or single
Fiber bi-directional (optional)
Transmit power:-12dbm (1310nm) / -5dbm (1550nm)
Receive sensitive:-36dbm (1310nm) / -38dbm (1550nm)

Power supply
Ac 220v10%, 50hz
Dc¡¡ìc48v (optional)
Consumption:5w

Environment
Temperature:050
Humidity: 90% (non condensing)
Dimension
Wd(mm): 245 x 215 x50



Carton.

Overview:

As a key member of veecom metroedge-express sdh/mspp product family, dhodt-lmxe is a carrier-class, cost-effective, compact (only 3u high) stm-1/stm-4/stm-16 sdh/mspp platform that is designed for applications in metro and access networks to facilitate the efficient transport of traditional tdm and emerging data traffic for service providers. Dhodt-lmxe is a card based compact sdh equipment, designed mainly as a gateway node between the core sdh network and a number of remote cpe boxes. It may also be used as a multi service sdh adm node in a typical ring or mash network. The 3ru high 19 inch wide chassis of the dhodt-lmxe has 19 cards positions, with 2 slots for the 1+1 power cards, 1 slot for network management card, 2 slots for network interface unit(niu) cards, and 14 slots for local interface unit(liu) cards.

Features:

*support up to stm-1/stm-4/stm-16
*large cross-connect matrix capacity is 96*96 high order vc-4 cross connection or 2016*2016 vc-12 or 96*96 vc-3 level full cross connection
*support 1+1 msp, sncp protection
*management channel can be dcc/e1/vc12
*clocking mode supports: internal clock / external clock / line clock / clock holdover
*ethernet service supporting gfp encapsulation, vc12 virtual concatenation and lcas, p vlan and 801.1q vlan
*e1 ber tester is embedded
*support up to 110 ethernet over 8*e1 (eopdh or eoe) remote cpes
*support up to 756 ethernet over 1*e1 (eopdh or eoe) remote cpes
*support up to 110 ethernet over vc-12 (eosdh or eos) remote cpes
*online upgrading
*full redundancy design






Carton.

V-rebplus is a 10/100m, self-adaptive, high performance, self-learning, remote ethernet bridge. Its low cost make it suitable for cost-sensitive bridging application or as a lan extender or subsection. When it is used as a extender or subsection, it can forbid filtrating to let all of the amount of traffic are transmitted in wan. Its 10 base-t interface can run in full duplex ethernet with topology and improve data throughput by eliminating the padding bit in 64 bytes frame. Variable speed up to 10mbps on the wan line is supported transparently. The line rate may be adjusted in running without any influence to v-rebplus. V-reb plus does not perform any negotiation over the link, which is specially suitable for satellites and other wireless broadcast applications.

Features:
*10/100m high fast powered self-adapting self-educated long-range ethernet bridge.
* lan according with: ieee802.3/ieee802.3u/ethernet interface: utp(rj45)
* wan interface: v.24/rs232 & v.35 optional
* wan line speed rate reaches up to 10mbps.
* speed of filtrating and transmitting is up to 30000 frame/ second. Buffer is 16m.
* it can store up to10000 mac. And mac addresses have functions of automatically learning and updating.
* ethernet utp interface has function of vlan802.1q. There have two transmitting mode to choose: data and image.
* automatically learn mac addresses on the lan to which it is connected, and forward only those frames destined for another lan.






Carton.

Overview:

GVE-Tplus is E1 to V.35/V.24/RS232 and Ethernet Converter. Other series interface RS449/RS530/X.21 also can be optional. E1 port can support BNC/75ohm and RJ45/120ohm optional.
This device provides an economical digital access solution for E1 and fractional E1 network services. With a adapter cable, the device can connect to other DTE device, such as router, at data rates of 64Kbps to 2048Kbps.User data is placed into the E1 frame, using only the required number of timeslots, timeslot assignment is accomplished according to the data port speed and manual setting of DIP switches. The V.35 or V.24/RS232 and Ethernet share the 2Mbps bandwidth, the total bandwidth of the 2 interfaces must be not more than 1984Kbps.GVE-Tplus is widely used in communication network, both in WAN and LAN connection field.

Features:

*Comply with ITU V.35, G.703, G.704, G.706, G.823
*Full comply with IEEE 802.3 /IEEE 802.1Q (VLAN)
*Framed (N*64Kbps) and unframed (2.048Mbps) optional
*Ethernet port 10Mbps, Full/Half Duplex mode compatible
*Frame mode support PCM30/PCM31
*Support CRC4
*Support internal clock, E1 recovery clock or V.35 line clock
*Provide analog and digital loopback and remote digital loopback test
*For E1 interface, 75ohm (unbalanced) and 120ohm (balanced) optional
*For data interface, V.35 and V.24/RS232 optional
*Comprehensive LED indicators on front panel, convenient for the diagnosis of equipment working state
*Stand-Alone and Rack-Mount available
*16-slots, elaborate cooling design and two redundant power supplies
*Support management
*-48V DC & 220V AC power supply optional

Specifications:

E1 & FE1 interface
Comply with ITU G.703,G.704,G.706,G.823
Rate:2.048Mbps;N*64Kbps(N=1~31)
Code type:HDB3
Impedance:75ohm unbalanced & 120ohm balanced optional
Physical interface:BNC coaxical for unbalanced
RJ45 twisted pair for balanced

Ethernet interface
Comply with IEEE 802.3/IEEE 802.3Q(VLAN)
Rate:10Mbps,Half/Full auto-negotiation
MDI/MDI-X optional
Physical interface:10 Base-T(UTP);RJ45

V.35,V.24/RS232 interface
Comply with V.35,V.24/RS232 standard
Rate:2048Kbps;N*64Kbps(N=1~31)
Transmission mode:Synchronization
Data interface:V.35 or V.24/RS232
Physical interface:DB25 female jack,V.35 via external adapter
Work mode:DCE

Power supply
AC power:220V¡¨¤10%,50Hz
DC power:-48V(optional)
Power:5W

Environment
Temperature:0¡«40¡æ
Humidity:0¡«95% RH


Carton.

Overview
E3/t3-t is state of the art network termination units (ntu) connecting fast ethernet lans over e3 or t3 circuits. The devices enable service providers and isps to supply transparent. Ethernet services to remote locations over existing e3/t3 infrastructure.

The devices can be used in a point-to-point application and widely used in lnteroffice or enterprise lan connection. E3/t3-t has one unframed e3 or one framed t3 port, and one 10/100basetx port. Packets are forwarded from the ethernet network to the e3 or t3 network at wire-speed, fully utilizing the expensive tdm circuit bandwidth.

Features:

* best price performance ethernet over e3 or t3 intelligent converter in the market
* wire-speed forwarding fully utilizing the e3 or t3 circuit
* vlan stacking and tagging enabling service providers to provide layer 2 transparent lan services while securing providers management
* fault propagation of e3 or t3 error conditions to ethernet port
* diagnostic collection on tdm and ethernet interfaces
* comprehensive led indicators on front panel, convenient for the diagnosis of equipment working state
* -48v dc & 220v ac power supply optional.

Specifications

E3 interface
Comply with itu g.703
Rate: 34.368 mbps
Code type: hdb3
Impedance: 75ohm unbalanced l
Physical connector: bnc coaxial for unbalanced

T3 interface
Comply with gr-499-core, ansi t1.107, ansi t1.102
Rate: 44.736 mbps
Code type: b3zs
Impedance: 75ohm unbalanced l
Physical connector: bnc coaxial for unbalanced
Power supply
Ac power: 220v+-10%, 50hz
Dc power: - 48 v (optional)
Power: 5w

Environment
Temperature: 0-40oc
Humidity: 0-95% rh






Carton.

We have good quality Used and New Laptops of all brands.
Product Name Used laptops

Processor CPU Series: Intel Core i7 4-generation family
CPU Type: Intel Core i7 4702MQ
CPU frequency: 2.2GHz
Core frequency: 3200MHz
Bus Specifications: DMI 5 GT / s
Three cache: 6MB
Core Architecture: Haswell
Core / thread count: quad-core / eight thread
Storage Device Memory Capacity: 4GB (4GB Ã?? 1)
Memory Type: DDR3L (low voltage version) 1600MHz
Hard disk capacity: 500GB
Hard Description: Support the expansion turn mSATA SSD hard drive
Drive Type: No built-in optical drive
Display

Touch screen: does not support touch
Screen Size: 14 inches
Aspect Ratio: 16:9
Screen Resolution: 1366x768
Screen technology: LED backlit, matte glare mask
Graphics

Graphics Type: Dual Graphics (fever-level graphics card + integrated graphics)
Graphics chip: NVIDIA GeForce GTX 760M + Intel GMA HD 4400
Memory Capacity: 2GB
Memory Type: GDDR5
Memory Interface: 128bit
Number of stream processors: 768
Multimedia devices

Camera: 720p HD webcam
Audio System: Built-in audio chip
Speaker: Built-in speaker
Microphone: Built-in microphone
Network Communications

Wireless LAN: 802.11b/g/n wireless protocol
Wired LAN: 100Mbps Ethernet card

I / O interfaces Data interface: 1 Ã?? USB2.0 +2 Ã?? USB3.0
Video Interface: VGA, HDMI
Audio interface: headphone / microphone combo interface
Other interfaces: RJ45 (network interface), power connector
Reader: Multi-in-1 card reader
Input Devices Pointing device: Touchpad
Keyboard Description: Full-size keyboard
Power Description Battery: 6-cell lithium battery, 5900 mA
Life time: 5 hours, the specific time depending on use environment
Power adapter: 100V-240V 90W AC power adapter adaptive
Exterior Laptop Weight: 2Kg
Length: 339.2mm
Width: 239.5mm
Thickness: 26.4mm
Shell material: composite material
Case Description: Black
Notebook accessories Packing list: Host x1 notebook
Power adapter x1
Power cord x1
Manual x1
Warranty card x1

Shipping DOCS

1. Commercial Invoice

2. Packing list

3. Certificate of Origin

4. Bill of Loading

5. Form A/Form E

6. Other documents are according to customer's

1. A Comfortable Contoured Shape - DIY Magnetic Detachable Up Cover

Maximum comfort, the mouse is equipped with two interchangeable panels â?? one a honeycomb shell that makes the mouse lighter - and the other solid non-perforated.



2. Light Speed Pro-grade wireless 2.4Ghz

A pro-grade wireless solution that achieves wired-like performance, built-in USB Nano receiver



3. 1:1 Tracking Advanced Sensor

Battle with an ultra-accurate and high-speed tracking engine, 6 Active and Adjustable Up to Maximum DPI



4. Dynamic Multicolor RGB Backlighting

Full-spectrum, fully-customizable RGB, select your own personal RGB matching with your gameplay



5. Rechargeable Battery Built in

600mA Rechargeable Battery - Charging time 3 hours - Working time Up to 70 hours



6. Ultra Speed scroll wheel - Rubber Sillicon

Premium Rubber Sillicon Scroll make you Scroll better and get more done.



7. All New High-Performance Switches " HUANO 50 million keystroke 2 Keys R/L "

Made for gaming left/right and 2X button switches provide ultrafast response



8. Dual High Quality Connection " 2.4Ghz USB Nano Receiver + Wired USB Type C Cable 2.0 "

USB Nano Receiver Working as wireless + USB C Cable Working as Wired Mouse - Rate of return: 1000HZ



9. Packing & Contents

B Color box Packing + User Manual 2 Page + USB Nano Receiver + USB Type C Cable

Data cable length: 180cm / Product size:124.90 * 63.70 * 40.50mm / Product Weight: 95g