INTRODUCTION:
The component A of shoe Mold Silicone Rubber is white flowing liquid and the component B is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.
FEATURES:
1.Two-component silicone rubber with tin-catalyst
2.Cured under room temperature
3.Low shrinkage
4.Excellent fexibility & easy demould
LIQUID RTV-2 SHOE MOLD SILICONE RUBBER NOTES:
Shoe mold silicone rubber is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon , mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried.
APPLICATION:
Shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.
ABOUT US:
We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber.
What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
For more information, welcome to contact Lilian:
Wechat / Phone: 8613617490457
E-mail: lilian(at)xrsil(dot)com
Skype: lilian-xrsilicone
Company:
Dongguan Xinrun Silicone New Materials Co., Ltd
Xinrun Group Limited
Factory address: No.2,Zhouliao Road, Langzhou Industrial Zone,Changping, Dongguan, Guangdong, China
Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags.
Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
FerroChrome is a kind of Ferro alloy which is formed by Ferro and Chrome,it is an important alloy addition in steel making. Ferrochrome (Fe Cr) is an alloy of chromium and containing between 50% and 70% chromium.
FEATURES:
-Mixing ratio of catalyst 2%-5%
-Good flowability
-Great self-deaeration
-Very good heat resistance
-High thermal conductivity
-Outstanding release properties
-High tear resistance
-Low shrinkage
-Outstanding resistance to inhibition
-Good resistance to polyester resin and concrete
SHELF LIFE:
When stored at or below 32°C (89.6°F) in the original unopened containers, such silicone base and its curing agents have a usable life of 12 months.
PACKAGE:
Silicone Base is available in 1Kg, 5Kg, 20Kg, 25Kg and 200Kg containers. Curing Agents are available in 50g, 1Kg and 20Kg containers.
APPLICATIONS:
-Architectural Restoration
-Sculpting/Wax Casting
-Concrete/GRC Casting
-Gypsum/Plaster Decoration
-Polyester/Resin Crafts Molding
-Furniture Molding
-Candles Mold making
-Soaps Mold making
-Tire Molding
-Detailed reproduction of figurines, art objects and similar items
ABOUT US:
We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber.
What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
Introduction of rtv 2 molding silicone rubber:
1. Two-part of rtv 2 molding silicone rubber: flowable liquid silicon and catalyst.
2. Rtv 2 molding silicone rubber cures at room temperature within 4-6 hours.
Features of rtv 2 molding silicone rubber:
1. Rtv 2 molding siliconerubber has an exceptional fluidity and good operability.
2. Rtv 2 molding silicone rubber hasgood temperature and deformation resistance as well as low shrinkage.
3. Rtv 2 molding siliconerubber has high duplication times.
Operation step for rtv 2 molding silicone rubber:
1. Step one to use rtv 2molding silicone rubber: take 100g of part a and add 2g of part b and mix thesilicon rubber and the curing agent evenly.
2. Step two to use rtv 2molding silicone rubber: vacuum pumping
3. Without exception, thistakes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
4. Step three to use rtv 2molding silicone rubber: brushing cast & perfusion molding operation.
25kgs/drum vacuum package or 200kgs/drum
9964 Shoe Mold Making Silicon Rtv 2 Silicone Rubber Suppliers
Short on time? Let Shoe Mold Making Silicon Rtv 2 Silicone Rubber sellers contact you.
Liquid RTV Molding Silicone Rubber raw material for all kinds of mold making
Features of liquid RTV Molding Silicone Rubber raw material for all kinds of mold making:
1. Two part of liquid fluid: liquid white silicone and curing agent.
2. Cure at room-temperature within 4-8 hours, but all performance will act perfectly when it cure within 2 - 4 hours.
3. Good fluidity and excellent operation.
4. Good resistance to weather, temperature, aging, acid.
5. Excellent tear strength, comfortable duplication times.
Application of liquid RTV Molding Silicone Rubber raw material for all kinds of mold making:
1.Resin crafts, unsaturated resin crafts
2. Poly resin crafts, candle crafts, plastic crafts
3. Making molds forgypsum,GRC,concrete,Artificial stone products molding,Wax casting
4.Decoration building mold making
5.Lighting & candles crafts,stationery gifts,crafts industry
6.Casting for Statue,Buddha, Christmas ornaments,sculptures, figures etc
Operation Instruction for Liquid RTV Molding Silicone Rubber raw material for all kinds of mold making :
RTV-2 liquid mold silicone rubber is a kind of flowing liquid, and it consists of two component, part a is a flow-able liquid silicone rubber, part B is the curing agent.
1. Firstly, after your previous work of dealing with the original model, take some liquid silicone rubber, add 2%~3% cuing agent of the amount of silicon and mix themevenly.
2. Then after vacuum-pumping the mixture, you can pour it into the mold frame.
3. The silicone mold will cured in 2~3 hours.
Note: the time for vacuum-pumping should be less than 3-5mins, otherwise, once the silicone rubber has cross-link reaction during vacuum. it will not be operated.
Applications of RTV-2 manual molding silicone rubber
It is mainly applied in manual mold design, PVC plastic mould, cement product mould, low melting-point alloy mould, alloy toy craft, plastic toy, craftwork, gift and stationery, big statue, cultural relic duplication and reproductions; pad printing orientation, electronic appliances vibration resistance, etc.
Features of RTV-2 manual molding silicone rubber
Low shrinkage,no deformation of the mould, good elasticity, the more moulds duplicated the better, etc.
Application of rtv-2 mold making silicone rubber:
Rtv-2mold making silicon rubber and silicone rubber are general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. An elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion.
Description of rtv-2 mold making silicone rubber:
Rtv-2molding silicon rubber is mainly applicable to mold duplication of poly crafts, resin craftworks, lightings, candles, etc. And fabrication of precision molds.
Feature of rtv-2 mold making silicone rubber:
1.Rtv-2 silicon rubber:flowable liquid silicon and curing agent.
2.Rtv-2 silicone rubber cures at room temperature within 2-4 hours.
3.An exceptional fluidity and good operability, easy to demold.
4.Good tensile and tear strength, low shrinkage.
5.High duplication times.
Model number: 620 628 638 640
Fob price: usd7.0~8.5
Port: shenzhen
Min: 100kg
Supple ability: 4ton/per day
1.Application of brushing rtv-2 molding silicone rubber :
Brushing rtv-2 molding silicone rubber mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.
2.Operation instruction of brushinng silicone rubber :
Brushing rtv-2 molding silicone rubber is composed of two components.Component a is white flowing liquid while component b is the curing agent.
Steps:
A. Take silicone rubber of 100g and add 2% curing agent for mixing evenly.
B. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles.
C. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.
Note: brushing rtv-2 molding silicone rubber is used for pouring or brushing technique. That is to say,
Firstly fix the product or sole model to be duplicated onto a plane plate,
Then enclose the plane frame with wooden plates to prevent the leakage of the silicon ,
Thirdly mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100: 2 and pour them onto the sole model,
At last brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried.
3. Storage and precautions of brushing molding silicone rubber :
1.Unsaturated polyester resin, epoxy resins, polyurethane resins
2.Polyurethane elastomers
3.Natural and synthetic waxes
4.Plasters and cements
Features of silicone rubber
1.Curing agent arrange together as free charged.
2.In liquid form and in various colors
3.With and exceptional fluidity and good operability
4.Temperature and deformation resistance as well as low shrinkage
5.High duplication times6.Samples orders are available 7.Moq:200kg
Silicone rubber are generally named:
Two-component room temperature vulcanization silicone rubber , a kind of elastic silicone rubber mold which features with resistance to deformation.High-temperature, acid-alkali and expansion, it mainly applicable to make the silicone mould for cultural relic duplication , architectural decoration, resin crafts , lighting ornaments , candles , statues mold design, product exploitation etc.
Instruction for using silicone rubber for mold making to make molds.
Step 1:preparing mold.
Once you have your model to mould you need to build a box from wood/acrylic to contain the silicone and get a good covering over your model , the size and shape of this container is totally depends on shape of the model , remembering to leave plenty room surrounding the model so that you will have a strong wall thickness (at least 20mm)
Note:small models can be cast in sourced containers like tins , ice buckets , cake tins, etc
Applications of rtv-2 molding silicone rubber
Rtv- silicone rubber is mainly be used as following:
1. Decoration building mould making, including architecture column, porch column, interior column etc
2. Unsaturated rein crafts, epoxy resin crafts, poly resin crafts, plastic toys and so on.
3. Concrete decoration, garden statue, plant, sculpture, buddha and animal crafts ..
Features of rtv-2 silicone rubber
1. Two part of liquid fluid: liquid white silicone and curing agent.
2. Cure at room-temperature within 4-8 hours, but all performance will act perfectly when it cure within 24 hours.
3. Good fluidity and excellent operation.
4. Good resistance to weather, temperature, aging, acid..
5. Excellent tear strength, comfortable duplication times.
Faq of rtv-2 silicone rubber
Why does the rtv-2 silicone mold get burnt out?
The unsaturated resin produces great heat when added the curing agent. So you must demould the product within 3 minutes to avoid this problem.
For getting further information about our silicone rubber, please feel free to contact with miss shameya. She can speak good arabic and english and chinese for an easier communication with you.
applications of RTV-2 molding silicone rubber
RTV- silicone rubber is mainly be used as following:
1. Decoration building mould making, including architecture column, porch column, interior column etc
2. Unsaturated rein crafts, epoxy resin crafts, poly resin crafts, plastic toys and so on.
3. Concrete decoration, garden statue, plant, sculpture, Buddha and animal crafts ..
features of RTV-2 silicone rubber
1. Two part of liquid fluid: liquid white silicone and curing agent.
2. Cure at room-temperature within 4-8 hours, but all performance will act perfectly when it cure within 24 hours.
3. Good fluidity and excellent operation.
4. Good resistance to weather, temperature, aging, acid..
5. Excellent tear strength, comfortable duplication times.
fAQ of RTV-2 silicone rubber
Why does the RTV-2 silicone mold get burnt out?
The unsaturated resin produces great heat when added the curing agent. So you must demould the product within 3 minutes to avoid this problem.
for getting further information about our silicone rubber, Please feel free to contact with Miss Shameya. She can speak good Arabic and English and Chinese for an easier communication with you.
Silicone rubber surfactant (Organic silicone surface additive) Application:
It can be used as a spray modifier, foliar absorption aids, activation agent, widely used herbicide, liquid nutrients, growth regulators, insecticides, fungicides, which do not decompose the original pesticide, can greatly reduce the surface tension of the solution, reducing the contact between the droplet and the leaf angle, surface enhanced the liquid in the plant or pest surface wetting, adhesion, and a spreader, thereby improving efficacy.
Silicone surfactant ZINCA-2000 is lower phytotoxicity and environmental hazards than the normal fatty amines, ethoxylated alcohol surfactant, and greatly reduce human and environmental impact.
Strenghts for platinum cure molding rubber silicone rtv
Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould.
Why platinum cure molding rubber silicone rtv
Silicone is the first choice of material when casting 3 dimentional shapes that contain undercuts as it exhibits excellent release properties, a high level of surface detail, very good chemical and high temperature resistance.
It comes in a two-component system (base + catalyst) available in a hardness range of very soft to medium. It is available for making moulds that are poured, brushed or sprayed
Features of platinum cure molding rubber silicone rtv
1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Favorable tension
5. No deformation
6. Favorable hardness
7. High temperature resistance, acid and alkali-resistance and ageing resistance
8. Food grade, non-toxic
Datasheet of platinum cure molding rubber silicone rtv
Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould.
Features of platinum cure molding rubber silicone rtv
1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Favorable tension
5. No deformation
6. Favorable hardness
7. High temperature resistance, acid and alkali-resistance and ageing resistance
8. Food grade, non-toxic
Why platinum cure molding rubber silicone rtv
Silicone is the first choice of material when casting 3 dimentional shapes that contain undercuts as it exhibits excellent release properties, a high level of surface detail, very good chemical and high temperature resistance.
It comes in a two-component system (base + catalyst) available in a hardness range of very soft to medium. It is available for making moulds that are poured, brushed or sprayed
Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould.
Features of platinum cure molding rubber silicone rtv
1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Favorable tension
5. No deformation
6. Favorable hardness
7. High temperature resistance, acid and alkali-resistance and ageing resistance
8. Food grade, non-toxic
Datasheet of platinum cure molding rubber silicone rtv
RTV 2 Liquid Silicone Rubber is a type of Room Temperature Vulcanization Silicone rubber, contains two parts, Part A is silicone rubber, and Part B is cure agent / catalyst, when the part A and part B mix evenly at the ratio of 100:2, the silicone rubber will be cured.
RTV 2 Liquid Silicone Rubber can be used for all types of products molds making, such as : Gypsum / plaster. Cement, Artificail Stone, GRC, GFRC, GRC,Tires ,PU ,Resin ,Soap ,Candle etc, for all size from small to few meters .
RTV 2 ( Tin Cured ) Silicone Rubber
RTV 2 Liquid Silicone Rubber is a type of Room Temperature Vulcanization Silicone rubber, contains two parts, Part A is silicone rubber, and Part B is cure agent / catalyst, when the part A and part B mix evenly at the ratio of 100:2, the silicone rubber will be cured.
RTV 2 Liquid Silicone Rubber can be used for all types of products molds making, such as : Gypsum / plaster. Cement, Artificail Stone, GRC, GFRC, GRC,Tires ,PU ,Resin ,Soap ,Candle etc, for all size from small to few meters .
INTRODUCTION:
This is a kind of room temperature vulcanized silicone rubber in condensation type. It's generally named as two part silicone rubber, Part A is a flowable liquid, part B is the curing agent or catalyst. It's mainly used for mold making.
This Silicone rubber is with good fluidity and moderate hardness which is suitable for middle size product with pattern by pouring operation, especially popular for manufacturer of resin crafts and gypsum decoration. Besides,
additive is available for brushing operation. It's one of our best selling silicone!
PRODUCT FEATURES:
*An exceptional fluidity and good operability, easy to demold
*Moderate hardness
*High tensile and tear strength
*Good flexibility
*Cure at room temperature
*Outstanding bubble releasing
*High duplication times
OPERATION INSTRUCTIONS OF MANUAL MOLD DESIGN MAKING LIQUID SILICONE RUBBER RAW MATERIALS:
Step 1: prepare the original molds
Step 2: Take 100G parts A and add 3G parts B and mix them evenly.
Step 3: Vacuum pumping
Step 4: Pouring casting or Brush operation
(For the detail of operation instructions,please contact us)
SHELF LIFE :
Twelve(12) months when stored under dry and cool place by original package under 25 Centigrade.
APPLICATION:
This silicone rubber is used for making molds of concrete stone,GRC, gypsum decoration, plaster ornaments, fiberglass products, polyester decoration, unsaturated resin crafts, polyresin crafts, polyurethane, bronze, wax, candle, and similar products .
ABOUT US:
We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber.
What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
9964 Shoe Mold Making Silicon Rtv 2 Silicone Rubber Suppliers
Short on time? Let Shoe Mold Making Silicon Rtv 2 Silicone Rubber sellers contact you.
