Item Specifics:
Model: PIM1030R12MZ
L0(uH)/inductance at 0A,100KH):Typ.:0.12
DCR (mª+)at 25ípC:Typ.0.65/Max:0.75
Irated(Adc)/Heat RatingCurrent :Typ.:30
Isat(Adc)/Saturation Current:Typ.:75
Available L0(uH):From 0.12 to 10.00
Molded Power Inductor
Operating temperature : -55íµ ~ +125íµ
Ambient Temperature, Maximum : 85íµ
Temperature Rise, Maximum: 40íµ
Features
Low profile, high current SMD type. Lowest DCR/µH, in this package size, low buzz noise due to its gap-less structure, RoHS compliant.
Frequency range up to 5MHz.
Lowest DCR/µH, in this package size
Low buzz noise due to its gap-less structure
RoHS compliant.
Applications
Notebook/Desktop/Server/Video Card applications.
High current POL converters.
Low profile, high current power supplies
Battery powered devices.
Ideal for power source circuits, DC-DC converter
DC-AC inverters inductor application.
Note:
1. L0 is inductance tested at 0 Adc.
2. Isat is the DC current which cause the inductance drop approximately 30% of its nominal inductance without current.
3. Irated is the DC current which cause the surface temperature of the part increase appproximately than 40íµ.
4. Operating Temperature Range: - 55íµ to +125íµ
5. The part temperature (ambient + temp rise ) should not exceed 125íµ under worse case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provision all affect the part temperature. Part temperature should be verified in the end application.
6. The rated current as listed is either the saturation current or the heating current depending on which value is lower.
Volume: 0402, 0603, 0805, 1206, 1210
Unit: H, NH, UH, MH
Error: ±5%, ±10%
Packing: 4000PCS/reel, 3000PCS/reel above 1206
Current: the difference between small current and large current, unit A (A)
The SMD inductors in our inventory have complete specifications:
The conventional models are complete, including: chip beads, high current chip inductors, chip power inductors, high frequency inductors, chip winding inductors, laminated inductors, common mode inductors, shielded inductors, I-shaped inductors, etc.; Conventional inductance, rated current and other parameter products are available in stock.
The role of chip inductors:
1. Filtering
It can be used for power supply filtering because it has the characteristics of DC and AC resistance;
2. Resonance
It can form a resonant frequency selective circuit with a capacitor, and the resonant frequency is determined by the size of the chip inductance and capacitor;
3. Frequency division
Can be used for frequency division of high and low frequency signals
Application areas of chip inductors: Internet of Things products, smart products, Internet products, communication products, 3D printers, etc.
CAPABILITIES
Coated Copper type of varnish specific to max temp requirement
Terminations & Lead Wires as required
Injection molding of bobbins
Finished assemblies
Style: Ferrite Rod bobbin coil( OEM your own bobbin size)
Coil: You can customized the below specificaiton for Coil
1:Coil Dimension of coil ( wire size from 0.0119-3mm (Inner,outer size,thickness,shape)
2:Coil Turns, ( customized yours)
3:Coil inductance: (customized)
4:Coil resistance. customized
5:coil leading wire,
6:winding direction wire winding way etc
We can produce small inductance coils and components assembly to 1mm,and the unique winding technology ,use the enameled wire dimention:OD 0.11mm (AWG56).
Some items even can reach the medical equipment standard
Ni-Zn Soft Ferrite Cores
Emi suppression generated from round cable used in digital equipment.
Emi/rfi suppression, plus and matching transferor, choke, input filters
PAGOODA chip inductor introduction:
Volume: 0402, 0603, 0805, 1206, 2520, 3225
4532, 5650
Sensitivity: 12NH, 15NH, 22NH, 39NH, 68NH
1R0K, 1R2K, 2R2K2R7K, 3R3K, 4R7K10uH, 15uH12uH18u22H1MH12MH 1.5MH18MH2.2MH......
Error: J=+5%K=±10%M=±20%, N=±30%
Inductors used in power supply mounting and circuits are produced with metal composite materials or ferrite materials. It is mainly used for circuits that realize voltage conversion that requires a specific voltage to provide stable power for ICs. The corresponding inductor is used in the power supply circuit, maintains the inductance when the current allows, and has the characteristics of low square resistance.
High Current
Slow down saturation and maintain high current characteristics
Low RDC
Improves high current efficiency through low branch resistance
PAGOODA high-end technology electronic component manufacturers, chip inductors have complete specifications, can provide samples, quality assurance, comprehensive technical support, welcome to inquire
RF inductors are special inductors designed to be used in radio frequency (RF) and microwave applications. Inductors are basic passive components which serve to oppose changes in current flow. When current is applied from a battery or power source, the inductor temporarily stores it using a magnetic field.
For price, specification and other details please contact us
Supplier From
Gijang Gun,
Busan,
South Korea (Republic Of Korea)
Panel meter, current transformer, voltage transformer, power meter, ampere meter, voltage meter, frequency meter, power factor meter, watt meter, transducer, transformer..
Features:
1. High dimensional precision wire wound inductors suitable for automatic placement;
2. Good solderability;
3. Heat-resistant resin encapsulation, with excellent mechanical strength;
4. Excellent Q value and high reliability;
5. Used in LCD TVs, computer drives, mobile phones, car audio and other electronic products.
Order Hotline: 400-003-5559
I-shaped inductor, the role of the inductor, the inductance formula, the unit of the inductor, the chip inductor package, the inductor, the chip power inductor, the one-piece inductor, the chip inductor specification, the I-shaped inductor, the chip I-shaped inductor specification, Shielded I-shaped inductor, SMD inductor tdk, SMD inductor pdf, SMD inductor 47uh, SMD inductor 470, SMD inductor 330uh, SMD inductor 2.2uh, buy SMD inductor,
We have passed ISO9001:2015,CE,SGS approval and IEC report
We can provide many other inductors.
Frequency: 50Hz to 500kHz
Operating temperature: -40 to +105 ° C
Separated windings for minimum inter winding capacitance
1 layer windings for highest common mode impedance over widest frequency range
Wound on nylon casing to protect windings
Available in vertical or horizontal mount
Application:
Power line filtering, EMI/RFI for switch mode power supplies.
Product Description
Toroid core datas COILFORMER DIMENSIONS (mm)
TYPE OD ID H MASS (G)
T3.0
3.05
1.27
1.27
0.04
T3.9
3.94
2.24
1.3
0.05
T3.9/2
3.94
2.24
2.0
0.07
T4.0
4.0
2.4
1.6
0.06
T5.8
5.84
3.05
1.52
0.1
T5.8/3
5.84
3.05
3.0
0.3
T6.3
6.3
3.8
2.5
0.2
T9.5
9.53
4.75
3.17
0.8
T10
10.0
6.0
4.0
0.9
T12.5
12.5
7.5
5.0
1.8
T13.3
13.3
8.3
5.0
1.8
T14
14.0
9.0
5.0
2.0
T15
15.0
10.4
5.3
2.4
T16
16.0
9.6
6.3
3.7
T17
17.0
10.7
6.8
4.4
T20/7
20.0
10.0
7.0
7.6
T22
22.1
13.7
6.35
6.8
T23/8
22.6
14.7
7.6
8.1
T23/9
22.6
14.7
9.2
9.8
T25/10
25.3
14.8
10.0
16
T25/12
25.3
14.8
12.0
19
T25/15
25.3
14.8
15.0
24
T25/20
25.3
14.8
20.0
33
T29
29.5
19.0
14.9
27
T30
30.5
20.0
12.5
25
T34/10
34.0
20.5
10.0
27
T34/12.5
34.0
20.5
12.5
33
T36
36.0
23.0
15.0
43
T40
40.0
24.0
16.0
61
T42
41.8
26.2
12.5
48
T50
50.0
30.0
20.0
118
T58
58.3
40.8
17.6
115
T100
102
65.8
15.0
330
We can provide SMD power inductor and many other inductors.
We have attained RoHS, ISO9001 certificates. The good quality and low in price with high prestige attracted more customers. If you are interested in our products, please told us what kinds of products you need and more information on it. We can supply samples according your requirements.
