Polyaluminium Chloride is a water chemical that is made up of aluminium, oxygen, hydrogen, and chlorine. Aluminium Chloride Hydroxide is abbreviated as Polyaluminium Chloride (PAC). It is a yellow-colored, water-soluble solid.
Poly aluminium can remove germs, deodorization, decolorization, fluoride, aluminium, chromium, phenol, oil, turbidity, heavy metal salts, radioactive pollution, and other contaminants to purify a broad spectrum of water.
PAC is also used in the oil and gas sectors for oil refining, where it acts as an oil-water emulsion destabiliser with outstanding separation performance. In the case of crude oil, any presence of water implies a lower commercial value and greater refining expenses, therefore this product is critical in guaranteeing maximum efficiency.
Product name: Polyaluminium chloride (PAC)
CAS:1327-41-9
Appearance: yellow powder
Usage: water treatment,Flocculant
PAC( Polyaluminium Chloride) is high-efficient, cheap and nontoxic inorganic high molecular compound. The solid is yellow powder. It is easily soluble in water. In the hydrolytic process, it is accompanied with the chemical processes such as electrochemisty, coagulation, absorption and precipitation. The product has the features including wide applicable range of pH value, large granule and quick speed in sedimentation. It is widely applied for treating the drinking water, industrial water and daily sewage etc. PAC
As professional polyaluminum chloride PAC manufacturer, we will promise you the best quality and most satisfying service.
Packaging & Shipping
Package:Woven bag inner-lined with PE bag, 25 kgs net weight/bag, or on customer's request.
Dear customers: We will arrange produce and shippment immediately when you place the order.
PAC-I(POLY ALUMINIUM CHLORIDE, For industrical water treatment)
PRODUCT APPEARANCE
APPEARANCE: The solid product is produced by the spray drying technology and the obtained product is dark yellow, Corresponding liquid products is dark yellow.
RAW MATERIALS: Hydrochloric acid or aluminum-containing hydrochloric acid, calcium aluminate powder.
USAGE: A variety of industrical wastewater treatment( paper, printing and dyeing, leather,ceramics, metallurgy,mining, oil, fluoride, coal washing, food and other industrical water)
Industrical water treatment
Water reuse treatment.
Cooling water treatment
Municipal wastewater treatment
Solid PAC package, outside bag is the woven bagwhichismade from polypropulene and the inner bag is thin film bag which is made from polyethylene, 25Kg per bag. The liquid product is usually transported by tank cars, also can be loaded in barrels pending on the requirements of the customer.
Plastic woven bag,n.w.25kg
10710 Polyaluminium Chloride Suppliers
Short on time? Let Polyaluminium Chloride sellers contact you.
Product introduction
1.Become flocculant in high speed , big block ,high activity and rapid sedimentation analysis.
2.It doesn't need other accessory ingredients and use less dosage than other unorganic coagulating agents and has lower cost for treatment water.
3.It has wide range PH value and strong adaptability and good effect for high turbid and high temperature organic contaminated water and lowly turbid low--temperature or ganic continue-aminated water.
Application
1.Tap water,life sewage
2.Various industrial waste water.
3.Tannage and cloth cockling-prevent
4.Cement Solidifying, and moulding
5.Refining of pharmaceuticals, glycerine and sugar
6. Catalyzer carrier
7. Paper-making glue.
Packaging and storage :
1, Lined with plastic bags, with outer surface of plastic film woven bag, each bag weighs about 25kg.
2, Stored in a cool and dry place to prevent the sun and rain.
Cautions:
1.This product mustn't be stored together with other chemical reagents.
2.Solid products should be stored in a ventiated and dry place with the storage period of two years,and the availability won't be changed after the product is affected by damp.
Pac-01(white powder, spary drier type): for drinking water, paper-making, medicament, cosmetics auxiliaries, etc.Specifications: al2o3, %, 29-30; bacisity, 40-60; water insoluble, less than 0.3%:
Pac-02(light yellow powder, spary drier type): for drinking water treatment or wastewater treatment.Specifications: al2o3, %, 29-32; bacisity, 70-85; water insoluble, less than 0.5%:
Pac-03(yellow powder, drum drier type): for drinking water treatment or industrial wastewater and municipal wastewater treatment.Specifications: al2o3, %, 29-30; bacisity, 80-95; water insoluble, less than 1.5%.
(new product)pac-s(yellowish powder, spary drier type): for drinking water, paper-making, medicament, cosmetics auxiliaries, etc.Specifications: al2o3, %, 30; bacisity, 60-80; water insoluble, less than 0.2%:(water solution: totally transparent)
Pac-04(yellow brown powder, drum drier type): for industrial wastewater and municipal wastewater treatment.Specifications: al2o3, %, 25-28; bacisity, 85-110; water insoluble, less than 1.5%:
1. Its dosage lower than aluminum sulfate (based on Al2O3) and water treatment cost is lower than other inorganic flocculants.
2. The product can cause quick formation of flocs, big flocs formation and rapid precipitation. Its treatment capacity is 1.3-3.0 times of other inorganic flocculants.
3. It enjoys wide-range adaptability for different-temperature source water and a good solubility.
4. It is slightly corrosive and easy for operation.
5. The liquid product is suitable for automatic dosing. Furthermore, it will not block pipes over long-time usage.
GRADES
PAC-01,White powder, spray dryer type, for drinking water treatment or paper production.
PAC-02,Yellow powder, spray dryer type, for drinking water treatment or wastewater treatment.
PAC-03, Yellow powder, drum dryer type, for drinking water treatment or waster water treatment.
APPLICATION METHODS
1. The liquid product can be dosed directly or dosed after dilution. As for the solid product, dilution is necessary before being dosed. Water amount for dilution shall be determined based on the amount of the chemical to be dosed and the quality of water to be treated. Dilution proportion for solid product is 2%-20%, and for liquid product, 5%-50%(based on weight percentage).
2. The dosage of the liquid product is 3-40g/MT and the dosage of the solid product is 1-15g/MT. The specific dosage is based on the flocculation test and on the trial.
3. Its acidity is lower than other inorganic coagulants.
PACKAGE AND STORAGE
1. The solid product is packaged in 25kg polypropylene woven bagswith inner plastics bags.
2. The liquid product can be stored for one year without losing its effect, while the solid product, for two years. The product should be stored in a dry and ventilative room, but the effect will not be affected even if it gets wet.
Pack in 25kg PP woven bags with inner plastic bags
Product and Description :polyaluminium chloride (PAC)
The product is high-efficient ,cheap and nontoxic inorganic high molecular compound .It's easily soluble in water .In the hydrolytic process, it is accompanied by the chemical processes such as electrochemistry ,coagulation ,absorption and precipitation . The product has the features including wide applicable range of PH value ,large granule ,and quick speed in sedimentation .It's widely used in treating the domestic drinking water, domestic sewage and industrial waste water .
Production Process:
The plate and frame filter press is a plate and frame filter press. The reacted liquid PAC is filtered through the plate and frame machine to remove impurities, insolubles, sediments, etc. The processed liquid has a higher purity, and the dried product has a golden color and dry particles Uniformity, high content, extremely low water insoluble matter. The products processed by this process can be used as drinking water-grade water treatment agents, and can also be called drinking water-grade polyaluminum chloride.
Application:
PAC is a kind of inorganic macromolecule flocculant. Through the hydroxyl ion bridging function and the polyvalent anion polymeric function, it produces large molecular and high electricity inorganic macromolecule. It adapts a wide pH range of 5.0~9.0, and the best is between 6.5~7.6.
1. Purification of urban water supply and drainage
2. Industrial water supply purification.
3. Urban sewage treatment.
4. Various industrial wastewater treatment
5. Sizing for paper making.
6. Sugar liquid refined.
7. Cast molding.
8. The cloth is anti-wrinkle.
9. Catalyst carrier.
10. Medicine refining
11. Cement quick-setting.
12. Cosmetic raw materials.
Packing, Storage and Transportation:
Package in 25kg P. P woven bag or paper-plastic bags with PE lined, or as per buyer's instructions. In storage and transportation, pay attention to heatproof and moisture proof. The powdery. Product will be damped to be caked and will be poor in solubility if exposure to air for long time.
professional polyaluminium chloride manufacturer for drinking water treatment
Cas No.:1327-41-9
Molecular formula: [Al2(OH)nCL6-n]mÃ?
Appearance: Light Yellow Granule or Powder
ITEMS
PRODUCT GRADE
Potable Water Grade Industrial Grade
Content% 28-32% 25-28%
Basicity % 40-90 40-90
PH 3.5-5.0 3.5-5.0
Water insoluble matter% 1.0 1.0
Product Description: Poly Aluminium Chloride is an inorganic high-molecular polymer with gelling property. It could be used as cementing material in fireproofing material, Ultrapure alumina products, refractory concrete etc.
Application:Poly Aluminium Chloride is an flocculant mainly used in the purifying of drinking water. It is also used in the special water treatment, such as removal of iron, cadmium, fluorine, radioactive pollutant, oil slick etc. It could also be used in industrial waste water treatment, such as the waste water treatment of dying industry. It is also widely used in the foundry industry, paper making industry, pharmaceutical industry, leather industry etc.
Properties: this product is yellow or light yellow, dark brown, dark gray resin solid, and has strong function of bridging adsorption. During the process of hydrolysis, accompanying physical and chemical processes such as condensation, adsorption, precipitation and so on. The net water effect is obvious and non corrosive for the pipeline equipment. It can effectively support the water chromatophilic substance like ss, cod, bod and arsenic, mercury and other heavy metal ions.
Usage: widely used for drinking water, industrial water and wastewater treatment.
Polyaluminium chloride code PAC, usually also called water purifier or flocculating agent, it is between ALCL3 and AL (OH) 3 of a kind of water-soluble inorganic polymer, chemical general formula for [AL2 (OH) NCL6 - while NLm] which m on behalf of the polymerization degree, neutral degree n PAC products.Color yellow or pale yellow, dark brown, dark gray resin solid.Bridging the product has strong adsorption performance, in the process of hydrolysis, accompanied by condensation, adsorption and precipitation and other physical and chemical process.Polyaluminium chloride and the traditional inorganic coagulants the fundamental difference between the traditional inorganic coagulants as low molecular crystal salt, and the structure of polymeric aluminium chloride from morphological and changeable multiple carboxyl complex composition, flocculating settling speed, suitable for wide PH range, no corrosive to the pipeline equipment, water purification effect is obvious, to be effective in the removal of water color quality SS, COD, BOD and arsenic, mercury and other heavy metal ions, the products are widely used in drinking water, industrial water and wastewater treatment field.
We are a professional manufacturer of polyaluminium chloride, we produce this goods for living water purificating and industry wasterwater treating.If you have any requirement on them welcome to contact us.
1) polyaluminium chloride
2) waste water treatment and drinking water treatment
3) cas: 1327-41-9
4) appearance: yellow powder
5) 25mts/1x20'fcl for waste water treatment pac
22mts/1x20'fcl for drinking water treatment pac
10710 Polyaluminium Chloride Suppliers
Short on time? Let Polyaluminium Chloride sellers contact you.
