Application: IP Telephones, Wireless Network Access Points, Blue Tooth Access Point IP Print Servers, Security Camera, etc.
Item: 12v 24v 15v 0.5A 1A 2A poe adapter
Input Rated Voltage : 100Vac~240Vac
Input Frequency Range: 47Hz~63Hz
Input Inrush Current: 1.3A max
Efficiency: 87%(MIN)at Rated Voltage, level VI
Ripple and Noise: <120Mv at the full road with 20MHz bandwidth
Turn On Delay Time: <3S (AC:110V and full load)
Safety protection: over voltage and current protection for power adapter
Leakage Current: <5mA
Operating Temperature: 0°C----+60°C
Storage Temperature: -20°C----+85°C
Certificate: CE GS TUV UL/CUL FCC ROHS,SAA,PSE,C-TICK
Safety Standard :
EN60950-1 UL60950-1 ESD (EN61000 3-3)
CAS (60950 ITE/TE) FCC Part 15 subpart B Class B
AN/NZS CISPR 22:2006
Data connector RJ45 +24V pins4&5, Power Return pins7&8
Futures: Compliant with Isolation and Channel
Characteristics of IEEE802.3af
Data and Power carried over one Ethernet Cable
FEATURES
+/- 48V DC input; 24V Passive PoE output
Provide power and access to device at the same time
Power-in/Power-out LED display
Easy-Positioning design, simple installation for vertical or horizontal direction
Dual (DC-in/battery) input power redundancy
OVERVIEW
PSE151DG is a 48V to 24V Gigabit PoE injector that it is flexible and convenient to be powered by a DC connector and Terminal block as redundant dual-Input design.
Application: IP Telephones, Wireless Network Access Points, Blue Tooth Access Point IP Print Servers, Security Camera, etc.
Item: 48V 2A PoE Injector
Input Rated Voltage : 100Vac~240Vac
Input Frequency Range: 47Hz~63Hz
Input Inrush Current: 1.3A max
Efficiency: 87%(MIN)at Rated Voltage, level VI
Ripple and Noise: <120Mv at the full road with 20MHz bandwidth
Turn On Delay Time: <3S (AC:110V and full load)
Safety protection: over voltage and current protection for power adapter
Leakage Current: <5mA
Operating Temperature: 0°C----+60°C
Storage Temperature: -20°C----+85°C
Certificate: CE GS TUV UL/CUL FCC ROHS,SAA,PSE,C-TICK
Safety Standard :
EN60950-1 UL60950-1 ESD (EN61000 3-3)
CAS (60950 ITE/TE) FCC Part 15 subpart B Class B
AN/NZS CISPR 22:2006
Data connector RJ45 +24V pins4&5, Power Return pins7&8
Futures: Compliant with Isolation and Channel
Characteristics of IEEE802.3af
Data and Power carried over one Ethernet Cable
This 24 Ports 10/100/1000M POE Injector also are called Power over Ethernet midspans devices, the 24 Ports 1000M PoE Injectorare based on the existing network interface and embed PoE function. This midspans have 24x2 Standard RJ45 network ports, onegroup of network ports are used for uplinking ethernet switches or other network devices, the other group of network ports support POE power+data output.PoE Injector provides a simple, economic, high-performance, intelligent Ethernet power supply and data communication solution.Simple to use, easy installation, superior performance, cost-effective. It is an ideal choice for customers to improve the quality of the project.
Main Feature:
Supply power to wireless access points and surveillance cameras over cat-5 cabling.
24 -Port 10/100/1000Mbps Data input
24 -Port 10/100/1000Mbps Data + Power output
industrial MeanWell power supply built in
passive 24v POE 4/5+,7/8-
Remote power feeding up to 100 meters
1U rack design, suitable for cabinet-mounted
Scalable Solution
The 24 Ports 1000M POE Injector support up to twenty four Ethernet terminals. Multiple midspans can be mounted in a wiring closet
to support additional terminals, providing a simple, cost effective method for expanding the network.
Easy to Use
The 24 Ports 10/1000M POE Injector are plug-and-play products. Once turned on, they automatically detect all Power over Ethernet
terminals and supply inline power.
Model: 12V 2A 24V 1.25A Switching AC DC interchangeable plug power adapter
Input: 100V~240V, 50~60Hz (Works Worldwide)
Output: 5V 1.5A 7.5W
Power Cord/outlet: EU/US/AU/UK AC Plug (Accept more request)
Outlet: 5.5x2.1/5.5x2.5mm (Accept more request)
Size: 74*28*63 mm (L x W x H)
Material for PCB & Housing: ABS+PC+Fireproofing material
Delivery Date: Within 2-3 working days after confirming the payment
PT-PSE100G-24 is a single port midspan Injector with 2 Pair PoE up to 26 watts of power at 24 VDC at 1100 amp.
Designed for the outdoor PoE Injector, such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 0/100/1000Mbps of data rates. Fully comply with IEEE802.3af compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device.
Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with wall-mounted. It operates with a wide input voltage of 100-240 VAC, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables.
Can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender).
The POE Injector are Enclosed in an IP40 fire retardant plastic case, designed for indoor use, installation with Wall-mounted.
We are PoE Injector supplier and more information you can view here
We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon.
high quality PoE Injector Specifications
Parameter Description
Key Features 24VDC output voltage
Wall-mounted
Part Number PT-PSE100G-24
Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1
Regulatory Compliance
IEEE802.3af
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5 (+), 7/8 ()
Output Power Voltage: 24Vdc
User Port Power: 26W Guaranteen
Input AC Input Voltage: 100 to 240 Vac
Frequency: 47 to 63Hz (50/60Hz Typ.)
DC Input Current: 1A
Working Environment Operating Temperature: 0 to 40
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -20 to 70
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 2000meters
PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 6KV
Differential mode surge protection (10/700us): 1.5KV
AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV
Line-Line 1.2/50us (8/20us): 1KV
Mechanical Characteristics Case: Plastic
Color: Black
Mounting: Wall-mounted
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 134mmX 56mmX 33mm
Weight: 150gï¼?5.3ozï¼?
LED Indicator Power Indicator : Green
PoE Load Indicator : Green
Warranty 2 year
Safety Approvals CE/FCC
PT-PSE100GFN-24 is a single port midspan Injector with 2 Pair PoE up to 15.4 watts of power at 24 VDC at 0.65 amp.
We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon.
Designed for the PoE powered 15.4W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100Mbps of data rates. Fully comply with IEEE802.3af devices. It will directly power PD without detection.
poe adapter for sale:Creative Lianjie Network Technology
Enclosed in an plastic case. It operates with input voltage of 100-240 VAC, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables.
We are PoE Injector supplier and more information you can view here
china poe adapter Specifications
Parameter Description
Key Features Passive
15.4W
CE, FCC
Part Number PT-PSE100GFN-24
Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1
Regulatory Compliance
IEEE802.3af
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5 (+), 7/8 ()
Output Power Voltage: 24Vdc
User Port Power: 15.4W Guaranteen
Input AC Input Voltage: 100 to 240 Vac
AC Input Current: 0.5A
Frequency:50-60Hz
Working Environment Operating Temperature: 0 to 40
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -20 to 70
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 2000meters
AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV
Line-Line 1.2/50us (8/20us): 1KV
Mechanical Characteristics Case: Plastic
Color: Black
Mounting: Wall- mounted
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 134mmX 56mmX 33mm
Weight: 150g(0.33lb)
LED Indicator Power Indicator : Green
PoE Load Indicator : Green
Warranty 2 year
Safety Approvals CE,FCC
60W PoE Injector PT-PSE104GB-60-10
PT-PSE104GB-60-10 is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.1 amp.
Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps/10GBps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device.
We are PoE supplier
Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. 60W PoE Injector operates with a wide input voltage of 100-240 VAC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables.
Can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender).
We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon.
Outdoor POE Injector Specifications
Parameter waterproof POE Description
Key Features Wall-mounted
Part Number PT-PSE104GB-60-10
Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1
Regulatory Compliance IEEE802.3bt
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10GBit/s
Output Pin Assignment and Polarity:
4/5 (+), 7/8 () and 3/6 (+), 1/2 ()
Output Power Voltage: 55Vdc
User Port Power: 60W Guaranteen
Input AC Input Voltage: 100-240 Vac
Frequency: 47 to 63Hz (50/60Hz Typ.)
AC Input Current:1.5A
Working Environment Operating Temperature: 0 to 40
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -20 to 70
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters
PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 6KV
Differential mode surge protection (10/700us): 1.5KV
AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV
Line-Line 1.2/50us (8/20us): 1KV
Mechanical Characteristics Case: Plastic
Color: Black
Mounting: Wall-mounted
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 145.51mm X 65.8mm X 33.5mm
Weight: 255gï¼?8.99ozï¼?
LED Indicator Power Indicator : Green
PoE Load Indicator : Green @â?¤30W
Blue @ï¼?30Wâ?¤60W
Warranty 2 year
Safety Approvals cUL/UL/FCC/CE
RPOE switch has intelligent device Power management features solving a major problem of powering the device for internet service provider. This switch can be powered using remote power from customer using specially designed POE injector or any standard POE injector(24v DC,0.75amp).This eliminates the needs of arranging power at building top (ups not require/No need to pay more money to customer or society).This saves lot of money of ISPs and improves uninterrupted service to the customer.
PRODUCT FEATURE:
REVERSE POE TECHNOLOGY:8 Port 10/100 Reverse POE switch which has latest generation of fast Ethernet reverse POE switching technology. It contains 7*10/100 base T Reverse Poe ports (RPOE),1*10/100 Base date Uplink Port&12V DC out for Powering ONU.
Supports Auto-Negotiation: Each of the ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation.
Supports Non-blocking Wire Speed: The switch forwards and receives traffic seamlessly with its Non-blocking wire- speed. Every port of the Switch supports speeds up to 200Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly.
Cascading support: switches can be cascaded for more users per Building (Up to 1 Main+3 switches )
Port base Isolation u/Hardware VLAN: The feature of Port Isolation is implemented in this unit where in the Ethernet Date of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other.
Over voltage Protection: Over voltage Protection is provided on each date port to eliminate damage due to connection of higher voltage(Higher than 24V DC. Up to 80V DC). By mistake if user connect more than 24V POE injector then switch will goes on power off mode and will start working again once this high voltage source is removed.
Over current Protection: We have provided over current protection on each port to prevent damage to the switch in case of high current flowing due to any reason. This is provided using Resettable Fuse to facilitate easy maintenance and avoiding frequent change of blown fuse.
POE Injector For IP Cameras PT-PSE100GF
PT-PSE100GF is a single port midspan Injector with 2 Pair PoE up to 15.4 watts of power at 48Vdc, 0.32A amp.
Designed for the AF powered 15.4W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3af devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device.
We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon.
Enclosed in an IP40 fire retardant plastic case, designed for indoor use, installation with Wall-mounted. It operates with a wide input voltage of 100-240Vac, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables.
Can be extended with the PoE Injector for wireless APs PT-PEX-01G-OT(Outdoor or Indoor PoE Extender).
We are PoE Injector supplier and more information you can view here
Parameter Description
Key Features
Part Number PT-PSE100GF
Ports condition LAN Port*1,AC Input Port*1, PoE Output Port*1
Regulatory Compliance IEEE802.3af
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
PoE Injector Output Pin Assignment and Polarity:
4/5 (+), 7/8 ()
Output Power Voltage: 48Vdc
User Port Power:15.4W Guaranteen
Input Input Voltage: 100-240Vac
Frequency: 50/60Hz Typ
Working Environment Operating Temperature: 0 to 40
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -20 to 70
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 2000meters
AC Surge Protection Line-Earth 1.2/50us (8/20us): 6KV
Line-Line 1.2/50us (8/20us): 4KV
Mechanical Characteristics Case: plastic
Color: Black
Mounting: Wall-mounted
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 134 X 56X 33mm
Weight:170g(0.37lb)
LED Indicator Power Indicator: Green
PoE Load Indicator: Green
Warranty 2 year
Safety Approvals CE, FCC
POE Injector For IOT Application PT-PSE10GN
PT-PSE10GN is a single port midspan Injector with 2 Pair PoE up to 15.4 watts of power at 48Vdc, 0.32amp.
We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon.
waterproof POE
Designed for the AF powered 15.4W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3af devices.
outdoor PoE Injector
Enclosed in an IP40 fire retardant plastic case, designed for plug and play indoor use with compact structure. outdoor PoE Injector operates with a wide input voltage of 100-240Vac 0.5A, The effective distance is 100 meters over Cat5e/Cat6 cables.
Can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender)
Parameter Description
Key Features Single-port
Wall-mounted poe
Part Number PT-PSE10GN
Ports condition LAN Port*1, PoE Output Port*1
Regulatory Compliance
IEEE802.3af
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5 (+), 7/8 ()
Output Power Voltage:48Vdc
User Port Power: 15.4W Guaranteen
Input Input Voltage:100-240Vac
Frequency:50/60Hz Typ
Working Environment Operating Temperature: 0 to 40
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -20 to 70
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 2000meters
AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV
Line-Line 1.2/50us (8/20us): 1KV
Mechanical Characteristics Case: plastic
Color: White
Mounting:
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 83X 51X 69mm
Weight: 380g(0.83lb)
LED Indicator
Power Indicator: Red
PoE Load Indicator: Green
Warranty 2 year
Safety Approvals CE, FCC
indoor Industrial PoE injector PT-PSE104GB-60-5
PT-PSE104GB-60-5 is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.1 amp.
We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon.
Designed for the poe injector 60w (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps/5GBps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device.
Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. It operates with a wide input voltage of 100-240 VAC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender).
PoE Injector for camera
Parameter Description
Key Features Wall-mounted
Part Number PT-PSE104GB-60-5
Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1
Regulatory Compliance IEEE802.3bt
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 2.5GBit/s,5Gbit/s
Output Pin Assignment and Polarity:
4/5 (+), 7/8 () and 3/6 (+), 1/2 ()
Output Power Voltage: 55Vdc
User Port Power: 60W Guaranteen
Input AC Input Voltage: 100-240 Vac
Frequency: 47 to 63Hz (50/60Hz Typ.)
AC Input Current:1.5A
Working Environment Operating Temperature: 0 to 40
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -20 to 70
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters
PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 6KV
Differential mode surge protection (10/700us): 1.5KV
AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV
Line-Line 1.2/50us (8/20us): 1KV
Mechanical Characteristics Case: Plastic
Color: Black
Mounting: Wall-mounted
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 145.51mm X 65.8mm X 33.5mm
Weight: 255gï¼?8.99ozï¼?
LED Indicator Power Indicator : Green
PoE Load Indicator : Green @â?¤30W
Blue @ï¼?30Wâ?¤60W
Warranty 2 year
Safety Approvals cUL/UL/FCC/CE
Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device.
We provide high quality PoE Injector, UL certification PoE, POE for DIN Rail, dc poe injector and soon.
poe injector 60w
Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. It operates with a wide input voltage of 36-72 VDC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender).
high quality PoE Injector Specifications
Parameter PoE Injector for camera Description
Key Features Wall-mounted
Part Number PT-PSE106GW-AR-D
Ports condition LAN Port*1, DC Input Port*1, PoE Output Port*1
Regulatory Compliance
IEEE802.3bt
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5 (+), 7/8 () and 3/6 (+), 1/2 ()
Output Power Voltage: 55Vdc
User Port Power: 60W Guaranteen
Input DC Input Voltage: 36 to 72 Vdc
DC Input Current: 2.5A
Working Environment Operating Temperature: 0 to 40
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -20 to 70
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters
PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 6KV
Differential mode surge protection (10/700us): 1.5KV
Line-Earth 1.2/50us (8/20us): 6KV
Line-Line 1.2/50us (8/20us): 4KV
AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV
Line-Line 1.2/50us (8/20us): 1KV
Mechanical Characteristics Case: Plastic
Color: Black
Mounting: Wall-mounted
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 193mmX 85mmX 41mm
Weight: 380gï¼?13.4ozï¼?
LED Indicator Power Indicator : Green
PoE Load Indicator : Green @â?¤30W
Blue @ï¼?30Wâ?¤60W
Warranty 2 year
Safety Approvals CE/FCC
PT-PSE100GFN is a single port midspan Injector with 2 Pair PoE up to 15.4 watts of power at 48Vdc, 0.32 amp.
PoE Injector manufacturer:Creative Lianjie Network Technology
Designed for the AT powered 15.4W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3at devices.
We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon.
Enclosed in an IP40 fire retardant plastic case, designed for indoor use installation with Wall-mounted. It operates with a wide input voltage of 100-240Vac, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables.
can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender).
We are PoE Injector supplier and more information you can view here
Parameter PoE Injector for door locks Description
Key Features 1. Output: 48Vdc, 320mA, 15.4W
2. Transmission Rate: 10/100/1000Mbps
3. Power Pin: 4/5(+),7/8(-)
Part Number PT-PSE100GFN
Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1
Regulatory Compliance
IEEE802.3af
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5 (+), 7/8 ()
Output Power Voltage: 48Vdc
User Port Power: 30W Guaranteen
Input Input Voltage: 100-240Vac
Frequency: 50/60Hz Typ
Working Environment Operating Temperature: 0 to 40
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -20 to 70
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 2000meters
AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV
Line-Line 1.2/50us (8/20us): 1KV
Mechanical Characteristics Case: plastic
Color: Black
Mounting:Wall-mounted
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 135mmX 95mmX 35.4mm
Weight: 400gï¼?0.88lbï¼?
LED Indicator Power Indicator: Green
PoE Load Indicator: Green
Warranty 2 year
Safety Approvals CE, FCC
Charger/wireless car charger/Fast Charger 10 Years ODM & OEM Manufactory 3C Mobile Phone Accessories 2020 New Automatic Clamping Car Wireless Car Charger
Product Description :
"Quick Details
Type : Electric, Wireless Charger, Power Supply Adapter
Function : Qi, QC4.0, QC2.0, qc1.0, QC3.0, PD
Brand Name : OEM or ODM
Model Number : C20 Car Charger
Port : 1 x USB
Input voltage and current : 12v/10a, 9V/2A, 12-24V/5A, 9V/1.67A, 12v/4a, 12V/2.5A, 100-240V/1.2A, 100-240V/0.2A, 12V/20A, 12V/5A, 100-240V/0.15A, 5V/2A, 100-240V/0.4A, 100-240V/0.8A, 12-24V/2.4A, 100-240V/0.6A, 12V/6.5A, 100-240V/0.9A, 100-240V/0.3A, 100-240V/0.5A
output voltage and current : 12V/1.25A, 9V/2A, 3.5V/2.4A, 5V/4.5A, 3.6V-6.5V/3A, 5V/2.4A, 9V/1.2A, 6.5V-9V/2A, 5.1V/2A, 20 V, 9V-12V/1.5A, 9V/1.67A, 5V/2A, 5V/1A, 5V/3A, 5V/8A, 5V/4A, 5V/2.1A, 12V/2A, 5.1V/2.4A, 5V/1.2A, 5V/1.5A, 5.1V/2.1A, 12V/1.5A
Output Power : 12W, 3W, 6W, 7W, 30W, 1.5W, 5W, 20W, 8W, 18W, 15W, 35W, 20W
Place of Origin : Guangdong, China
Product name : C20 Car Charger
Product standard : QI standard (with Type-C interface and Micro USB interface)
Product material : ABS flame retardant material + silicone
Input : 5V 2A / 9V 2A
Output : 9V 1.1A / 5V 1A
Output power : 10W 7.5W (max)
The longest charging distance : 8MM
Charging efficiency : more than 83%
Net weight : 224.7g
Color : Black
Price of product ( USD price or FOB price) :
USD4.5-7/pcs FOB
Product origin :
Shenzhen, China
Key Specifications/Special Features :
"Product Description
Brand Name : ODM or OEM Model Number C20 Car Charger
Color : Black Material ABS flame retardant material + silicone
MOQ : 1000pcs Package Retail package
Payment terms : 30% TT in advance, 70% balance before shipment
Delivery time : 2 - 7 working days after full payment
shippment : small order: By Express DHL/UPS/Fedex/EMS etc
Large order : By Sea/air or as your requests
Minimum Order Size and Packaging details :
"Packaging & Delivery
Packaging Details :
Fast Charger 10 Years ODM & OEM Manufactory 3C Mobile Phone Accessories 2020 New Automatic Clamping Car Wireless Car Charger
Picture Example : package-img
Lead Time : Quantity(Pieces) 1 - 1000 1001 - 10000 10001 - 100000 >100000
Est. Time(days) : 10 12 15 To be negotiated
