Specifications :
1- Load Capacity: 0- 1000kgs.
2- Maximum distance between grips: 700mm
3- Speed: Variable speed
4- Microprocessor based load indicator: Accuracy of ± 0.05% of load indicated & Resolution Of 100grams.
5- Extension meter: Least count of 1 mm through Proximity/ Encoder switch.
6- Over load excess elongation protection provided.
7- Newton or Kg. Can be selected.
8- A pair of grips provided to hold the samples up to 6 mm thickness.
9- Floor Standing Model.
10- Paint: Powder Coating.
11- Power: 440V AC, 3Phase, 50 Hz.
Plastic Film Tensile Test Machine is suitable for testing the peel force, heat seal strength, tearing resistance, deformation, puncture resistance, open force, low speed unwinding force of plastic film, composite film, soft packaging materials, adhesives, rubber, paper fiber and other products.
Features
More convenient design-Touch Interface.
The screw driving system greatly improves the accuracy of the displacement and can realize the continuously variable transmission.
The process of measuring maximum value, average value and real-time value is fully intelligent.
The test results can be outputted for group statistical analysis.
Over-load and emergency power-off protection assure the safety.
Equipped with micro-printer and USB interface,
Multiple selection of units: N (Newton), KN\m, lbf pounds, g (gram force).
The instrument is compatible with ISO, JIS, ASTM, DIN and other related international standards.
Principle
The pre-conditioned specimen is mounted in the gas diffusion cell as to form a sealed barrier between two chambers. The lower-pressure chamber is firstly evacuated, followed by the evacuation of the entire cell. A flow of gas is thereafter introduced into the evacuated higher-pressure chamber and a constant pressure difference is generated between two chambers. The gas permeates through the specimen from the higher pressure side into the lower side. The gas permeability and other barrier properties of the specimen can be obtained by monitoring the pressure changes in the lower chamber.
Technical Specifications
Test Range 200NÂ (Optional 30N, 50N, 100N)
Accuracy 1%FS
Width of Sample 50mm (Standard)
Test Speed 1-500mm/min (Adjustable)
Stroke 600mm
Dimension 450mm (L) 580mm (B) 1100mm (H)
Power Supply AC 220V 50Hz
Net Weight 50Â kg
Configurations
Standard: Instrument, Universal Grips, Micro-Printer.
Optional: Computer, Professional Software, Communication Cable, Standard Roller, Test Plate, Sample Cutter, Clamps for Floating Roller, Low Speed Unwinding Device.
High Accuracy Factory Price Elastic Band tester Plastic Bag Polymer Laboratory Mask Elastic Band tensile testing machine
Application
To test the tensile strength, peeling strength, heat sealing strength,tearing strength, piercing strength, compression strength, bending strength, and cutting strength of plastic film, composite film, tape, soft packaging material, rubber sheets, paper, non-woven fabrics and other packaging materials, widely used in industries of plastic films, food, pharmaceuticals, inspection agency, research institute, college and so on.
u With flexible interface and control mode, it can be used for multiple tests such as tensile test, peel test, seal test, tear test, puncture test, compression test, bending test, shear test, etc. Speed, thickness, clamping distance and other parameters can be set.
u The measurement accuracy is high, the test measurement accuracy can reach 0.5 grade.
u Computer controlled; online display of test result, auto data storage and analysis, multiple curves record, zoom in/out, computer print.
u Fully digital control system with imported AC servo system and motor, control displacement with zero drift.
u Using high precision ball screw loading; loading smoothly; long service life of testing machine, long-term stability and energy saving.
u Load/deformation measurement: with multiple sub-channels, multiple sensor extension measurements are available.
u Wide speed range, suitable for high and low speed test.
u Open data structures, both result parameters and procedure data are allowed to use randomly, which is very convenient for users. Self-editing report function, data can be easily imported into Excel table, convenient for data-processing.
u The control measurement unit can be either built-in (simple appearance, space saving) or external (easy to upgrade, maintain and operate independently from the microcomputer);
u With perfect limit protection, overload protection, emergency stop and other safety protection functions. It can make the test run safely and reliably.
u High sampling speed (100 times/s), make test results more accurate.
u Core part is imported, with high precision and durable.
u Double table standing design, easy and comfortable.
u Various clips optional for different test purposes.
u Touch screen, with need new software for elastic modulus.
Tensile Tester TST-01 is used to test the mechanical properties of various materials such as stretching, tension, tearing,peeling, deformation, seal strength, adhesiveness, puncture force, etc. It is suitable for plastic films, sheets, composite materials, paper, rubber, textiles, medical packaging, etc. It's specially designed for plastic film testing by standard ASTMD882.
Function and usage
It can set with 5 different temperature spots to do heat sealing, select the optimal heat healing temperature, and can also set the same temperature to speed up the heat sealing.
Instrument structure:
The structure of the heat-sealing tester is composed of 4 parts: pneumatic drive system, heat-sealing equipment, temperature adjustment system and time adjustment system.
Pneumatic drive system:
It includes pressure gauge, guide stick, cylinder, pneumatic valve, pressure regulating handle and so on. You can pull the pressure-regulating handle outward, rotate to the right side to adjust the heat sealing pressure to a high value, and rotate to the left side to reduce it. After setting the pressure, please press the handle to the side of mainframe to lock the air pressure.
Heating-seal device
It is composed of the upper and lower heat-sealing sticks, of which the upper one is connected with a cylinder. There is an insulating plate in the upper part, which can prevent heat transmit to the cylinder. The heat-sealing stick is made of aluminum, and the center is heater. There is a silica gel plate in the upper part of the lower heat-sealing stick, which can mitigate pressure impact during heat sealing. Temperature measurement system was installed at the back of the heat-sealing stick.
Temperature adjustment system:
The upper temperature controller controls the temperature of upper heat-sealing stick, and the rear temperature controller controls the temperature of lower heat-sealing stick. The temperature can be set at will through adjusting the button on the dial plate.
Time adjustment system:
Time adjustment system: The heat-sealing time can be set at will through adjusting the button on dial plate. The setting scope of time is 0.01s to 999.9h. Press the foot switch under the manual state, and the heat-sealing stick will be pressed together. Under the automatic state, the press-fitting time of upper and lower heat sealing sticks are controlled by a timer automatically, it can automatically recover later. The unit of timer is 0.1 second in general. There is time adjusting button on the panel of the timer, and the heat-sealing time can be adjusted at will.
Specifications
Power : AC220V 50HZ
Compressed air: 8kg/cm2
Heat sealing plane: 300mm10mm slick (With silicon pad in lower seal stick)
Heat sealing temperature: room temperature 20~300C (Precision 1C)
Heat sealing time: 0.01s~99.99h
Heat-sealing pressure: 0~0.8Mp.
Dimension: 700(L)mm400(W)mm540(H)mm
Weight: Desktop 30Kg.
700mm(L)X400mm(B)X540mm(H)
259461 Plastic Testing Machine Suppliers
Short on time? Let Plastic Testing Machine sellers contact you.
1- Pressure range: 0 ¡V 100kg/cm2„XNumber of stations: Three. (All for Long And Short Term)
2- Pressure Accuracy: Electromagnetic, hydro pneumatic pump(mercury make) keeps the accumulator charged at desired pressure, which in turn will ensure the smooth flow of static pressure.
3- Pressure input: Compressed air up to 7 kg/cm2
4- Pressure out put: Through hydro pneumatic pump. Ratio 1:25
5- Pressure control & Time Control: Three nos. of Digital pressure Controller Range 0.00 to 99.99 Bar. & Timer Range up to 999.9/9999 hours.
6- Failure detection: Through three nos. of Time totalizes.
7- Power requirement: 230 Volts 50HZ.
8- Paints: Powder coating.
9- RS 232 interface with WINDOW based software to conduct test and keep record of data with graph in PC.
1) pressure range: 0 ~ 20MPa
2) pressure display accuracy: 0.001MPa
3) control accuracy: upper limit +2%, lower limit -1%
4) temperature control range: normal temperature ~ 95 â??
5) temperature display range: �± 1 â??
6) Time display range: 0 minutes to 9999.59 hours
7) time display accuracy: 1 second
8) the maximum diameter of the sample: �¤630mm
9) Power supply of pressure control system: AC220V, 1.5kw
10) Power supply of temperature control system: AC380V power depends on the specifications of the water tank
Plastic Film Free Shrink Test Machine is professionally applicable to the determination of heat shrinkage ratio of various films, heat-shrinkable tubes, hard PVC films for tablets, and back-sheets in the fluid medium at different temperatures.
Features
Digital P.I.D. temperature control technology ensures the preset temperature to be reached rapidly without any fluctuation.
The instrument is heated through fluid medium, which can provide a stable test environment.
The automatic timer function is to efficiently guarantee the accuracy of test data.
The instrument is controlled by a micro-computer with touch interface.
Standard clamp wire mesh makes the test done smoothly.
Standards
ASTM D2732, GB/T 13519
Technical Specifications
Specimen's Size 140 mm x 140 mm
Temperature Range Room temperature ~ 200 C
Accuracy ±0.3 C
Power Supply AC 220V 50Hz
Dimension 440 mm (L) x 370 mm (W) x 310 mm (H)
Net Weight 24 kg
We are the authorized first vendor of ADTech!
KFDA CE approved,
FDA Pending
Price : Negotiable
Pre-Clinical Test Report
Accuracy
- In total samples 93.3% (14/15) - In positive samples 91.7% (11/12)
1. Pre-Clinical Test summary
1) Pre-clinical test is fulfilled by Domestic large clinical laboratory with ADTech COVID-19 IgM/IgG RAPID KIT
2) Tests are made by total 15 samples with 12 positive and 3 negative samples
3) Clinical Laboratory tested the sample with Immunofluorescence Analysis
2. Pre-clinical test result
1) Samples were tested by ADTech COVID-19 IgM/IgG RAPID KIT
2) Test result by ADTechs RAPID KIT
- 4 negatives and 11 positives results in 15 samples
3) Comparison between Immunofluorescence analysis and ADTechs RAPID KIT
- 14 test results are same(including negative and positive results) - 1 samples test result are different(Positive Negative by ADTech
For in vitro qualitative detect of Covid-19 antigen in nasal(NS) swab specimens directly from individuals who are suspected of COVID-19 by their healthcare provider within the first 5 days of the onset of the symptoms. This test is only provided for use by clinical laboratories or to healthcare workers for point-of-care testing, and not for at home testing.
1.Easy to collect samples simple operation without professional equipment.
2.The test results are available in 15 minutes, and the test results are clearly visible. 3.Convenient transportation and low price, higher accuracy.
4.Suitable for large-scale rapid screening.
Shelf life: 24 Months
Test Result time: 10 Mins
Packing: 25 Pieces per Box
Pallets for your warehousing system.
Made up from durable plastics, termite proof and long lasting.
Available in various colors, thickness and measurements.
Material: BAMBOO
Product Type: Storage Bamboo Baskets
Regional Feature: Eco-friendly, light weight, easy to use and care
Place of Origin: Vietnam
Product name: Bamboo Basket
Use: Storage for home decor
HDPE BOTTLES, Barrels, Dispencers Bales.
Can load in 1x40 HC approx. 25 MT.
Ready for shipment. Photos are available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
LDPE FILM MIX COLOR (JAZZ) BALES SCRAP / WASTE.
post consumer.
Can load in 1x40HC container aprox. 26 MT (10%) net.
Ready for shipment. Photos available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
259461 Plastic Testing Machine Suppliers
Short on time? Let Plastic Testing Machine sellers contact you.
