PFA sample dissolving tank bottle corrosion resistance
PFA sample dissolving tank is also called sample dissolving cup, digestion bottle, tubular bottle, etc; It is widely used for digestion of geological, geological and mineral experimental samples and dissolution of samples at medium and low pressures, supporting ICP-MS/ICP-OES analysis and other trace analysis experiments. According to the requirements of the experiment, there are U-bottom, flat bottom and V-bottom designs. It is used with the electric heating plate of our company, especially the perforated digestion instrument.
characteristic:
1. translucent appearance, smooth inner wall, no water hanging, easy to clean;
2. High and low temperature resistance: the operating temperature is - 200 260 (it is better not to exceed 150 under closed conditions);
3. Threaded port, excellent sealing, no air leakage;
4. Insulation resistance: the dielectric property is independent of temperature and frequency;
5. Anti pollution: low blank value of metal elements;
6. Extremely low dissolution and precipitation, it is an excellent utensil for storing reference materials, highly corrosive, expensive and ultra pure reagents;
7. When falling from a height of 1.2m above the ground, the bottle body will not crack, the bottle cap will not fall off, and there will be no leakage. The open mouth can be autoclaved;
8. No toxicity: It is physiologically inert and can be implanted into the body;
9. The cover and body can be numbered without confusion;
10. The design of V-shaped bottom makes it more convenient to collect a small amount of samples; The U-shaped bottom design is suitable for the detection of geophysical and geochemical samples.
PFA sample dissolving tank is also called sample dissolving cup, digestion bottle, tubular bottle, etc; It is widely used for digestion of geological, geological and mineral experimental samples and dissolution of samples at medium and low pressures, supporting ICP-MS/ICP-OES analysis and other trace analysis experiments. According to the requirements of the experiment, there are U-bottom, flat bottom and V-bottom designs. It is used with the electric heating plate of our company, especially the perforated digestion instrument.
characteristic:
1. translucent appearance, smooth inner wall, no water hanging, easy to clean;
2. High and low temperature resistance: the operating temperature is 200 260 (it is better not to exceed 150 under closed conditions);
3. Threaded port, excellent sealing, no air leakage;
4. Insulation resistance: the dielectric property is independent of temperature and frequency;
5. Anti pollution: low blank value of metal elements;
6. Extremely low dissolution and precipitation, it is an excellent utensil for storing reference materials, highly corrosive, expensive and ultra pure reagents;
7. When falling from a height of 1.2m above the ground, the bottle body will not crack, the bottle cap will not fall off, and there will be no leakage. The open mouth can be autoclaved;
8. No toxicity: It is physiologically inert and can be implanted into the body;
9. The cover and body can be numbered without confusion;
10. The design of V-shaped bottom makes it more convenient to collect a small amount of samples; The U-shaped bottom design is suitable for the detection of geophysical and geochemical samples.
Conventional tanks (concrete or mild steel) are prone to aging, wear and corrosion.
Concrete can crack when exposed to erosion and natural disasters, leading to water
contamination and leakage â?? and usually canâ??t be repaired. MS rusts easily and its also
easy heat conductor.
FRP â?? Fiber Reinforced Polymer is a strong but light weight glass fiber reinforced plastic
composite used in the aerospace, automotive, marine and construction industries. It has
a high-strength to weight ratio, an extremely long lifespan, and easy to maintain as well as
heat resistant.
FRP sectional panel tanks provides all types of advantages which other liquid storage
methods doesnâ??t. These tanks are DURABLE, LEAK-FREE, COST-EFFECTIVE OVER LIFECYCLE as well as EASY TO INSTALL, RECONFIGURE AND RELOCATE. This is an ideal option
for a wide range of usage including potable water storage, food and factory production,
commercial mining, fire protection, industrial liquids, rainwater harvesting, seawater
storage, and any other kind of liquid and granular storages.
High strength and high corrosionproof, provides long service life and convenient to fill and clean.
It provides wide applicability and can be widely applied for packaging in industries such as chemical engineering, petroleum, medicine and food etc.
Seal liquid test:Put the sealed barrel with liquid upside down or tap,the seal is at the lowest position,and no leakage within 24 hours.
The standard specifies blow-moulding technology requirements of the barrel, test methods and the rules and symbols, packaging, transporting and storage. This standard applies to polyethylene as the main raw material, barrels production through automatic blow molding machine,and this type of blow molding barrel is mainly used for solids or chemical products.
We also can help to change any design as your requirements. such as size,weight,color,capacity ect.
1000 liter / 275 gallon repurposed rain tank. These are used & new tanks, food-grade tanks are comprised of a galvanized metal frame with a pallet (metal, plastic, or wood) and a plastic HDPE bottle. The rain tank has a 6, 8, or 12-inch top-fill cap and a 2-inch bottom butterfly or ball valve. The tanks may or may not include a plastic cap with a buttress or NPT thread for the bottom valve. If a valve cap is included, it can be drilled to accept our garden hose spigot assembly. A spigot assembly and 7/8 inch hole saw are not included. The dimensions are approximately 39 inches wide across the bottom valve, 47 inches deep, and 48 inches tall and the tanks weigh approximately 75 lbs empty. Previous contents may include olive oil, fish oil, organic fertilizer or beverage concentrates and some residue may still remain inside. The residue, if any, will only enrich the soil.
high quality stainless steel 201 honey tank with cover and valve 25kg
Basic Information
Place of Origin:
CHINA
Brand Name:
Super-Sweet
Certification:
ISO
Model Number:
HB
Minimum Order Quantity:
1
Price:
12-45kgs
Packaging Details:
25 kg honey tank Standard Packing: 1pcs/carton Size: 34*33*33cm GW: 8kg
Delivery Time:
Shipped in 5 days after payment
Payment Terms:
T/T, Western Union, MoneyGram, D/P, L/C
Supply Ability:
5000 Piece/Pieces per Month 25 kg honey tank
Stock No - 2410071101SRV
Reg Year/Month - 2003/6
Mileage - 244,000km
Engine Size - 5,200cc
Transmission - MT
Drive Type -
Steering - Right Hand
Engine Model -
Model Code - KK-FE73EB
Chassis No - FE73EB500044
Fuel - Diesel
Color - White
Seats -
Maximum Carry - 2,790kg
Status -
