Machine Performance:
Knife-seat guiding structure with sliding block type, cam type for adjusting-knife mechanism.
Clamp press paper stack through hydraulic system, the spring re-position.
Worm gear drive mechanism, hydraulic clutch, mechanical brake.
WESSEL hydraulic system from Germany (optional), Italy oil pump.
Switzerland ABB main motor(optional).
One-piece, slotless and chrome-plated cast iron work table is sturdy and easy to maintain.
Import ball screw with double linear guides to drive backgauge.
Whole sealing safety guard for rear work table (optional).
Germany LEUZE infrared protection device(optional).
Main electronic units are from French TE and Japanese ORMON famous international brands.
Technical Parameter:
Model:SQZK168GM20
Max.Cutting Width:168cm
Max.Cutting Length:168cm
Max.Cutting Height:165mm
Min.Cutting Size(without false clamp plate):30mm
Min.Cutting Size(with false clamp plate):90mm
Front Table Length:75cm
Max.Clamp Pressure:50000N
Max.Cutting Speed:42time/min
Main Motor:8.5KW
Net Weight:6200Kg
The main disposition sqsk-920 numerical control paper cutting machine main disposition
The chrome-plating work table, brings the air cushion electronic knife lock
Ball bearing lead screw, straight line guide rail (match)
Infrared electro-optic protective device
Refuels the installment stroker
Trades the knife organization conveniently safely
Optics to knife line
Has the time delay function and not redundant both hands carries the knife installment
Wear-resisting self-locking worm gear case
Shear bolt
Main electrical machinery and work table electrical machinery's over-load protection
Germany hydraulic system and italian oil pump (match)
Import electric appliance part
Monolithic integrated circuit control system
223771 Paper Cutting Machines Suppliers
Short on time? Let Paper Cutting Machines sellers contact you.
This machine adopts the technology of europe and it has 10. 4" or 15" display screen designed novelly, the color of screen can be matched. Programming 10, 000 groups to assure the stability of performance.
The paper delivering section is driven by AC servo motor so that, the noise can be reduced and the working speed can be increased highly.
The paper feeding accuracy of paper location can reach 0. 001mm around.
Hydraulic pressure section adopts the rapid pressure increasing system to finish the pressure regulation.
The electric control system adopts Panosonic PLC, relilable characteristic, large capacity, it can store data for about 300, 000 hours and can upgrade to perform remote monitoring.
The low pressure control section adopts OMRON, LG, TOSHIBA, SCHNEIDER, BDI to make the control stably and efficient.
Model: CHM-92CD/115CD/137CD
Main specification:
Cutting width: 92cm/115cm/137cm
Paper feeding depth: 92cm/115cm/137cm
Master power: 3kw/4kw/4. 5kw
Min. Paper-weight pressure: 150dan
Max. Paper-weight pressure: 4000dan/4500dan/5500dan
Cutting accurancy: 0. 2mm tolerance.
Min. Cutting datumn 2. 5cm/2. 5cm/3. 0cm
Cutting speed: 45cuts/min
Voltage: 360-400V.
1.This a4 paper cutting machine adopts the servo motor (or stepless motor) to control the fixed-length cutting, feeding.It is equipped with the photoelectric, correction, tracing modifying system. It can do crosscutting and vertical cutting at the same time.And it can trace feeding institution with the products, blowing& absorbing transportation at same time, automatic collecting, robert automatic folding materials and cross transport to worktable.
2.Drive system use pneumatic system, photoelectric sensor to control, folding materials system use oil pressure to improve equipment..This machine integrates photo electric, liquid and gas as a whole, plc touching screen, and has the features of easy operationhigh-precision cuttingstate operation and low noise.
3.The machine has the feature of the motor frequency speed adjustment, automation counting, giving an alarm when stop and tension with digital indication.
4.All transitional rollers can be done in clients opinions to avoid surface injure.
5.This machine is very important to scratch of gloss photo paper.
The new and dynamic growth market of digital printing has also gained in every respect from the company undertaking only to produce the best possible machines. In the small and middle format sector, genuine, professional Non Programmable Non Hydraulic cutting machines are available at conditions which are very advantageous, both from a technical and economic point of view. These Machines completely work on Motorized Pressure.
Our compact Hydraulic Model Paper Cutting machines are distinguished by the same high quality standards which are valid for the construction of Programmable Hydraulic cutters: Sturdy construction and future-orientated platform for simple workflow integration.
Introduction:
This machine is specialist for horizontal and vertical cutting paper rolling materials to A4, A3, A2 size etc. it can be with 1 roll, or 2rolls, or 4 rolls etc
Main Technical Parameters:
Model RYQJ-1100D RYQJ-1400D
Max unwinding diameter 1100mm 1400mm
Reference weight of cutting paper 40~500g 40~500g
Max cut width 1150mm 1450mm
Cutting length 20-1000mm 20-1000mm
Cutting speed 10-150times/min 10-150times/min
Cutting precision ±0.2mm ±0.2mm
Voltage: AC380V/220V x 50HZ AC380V/220V x 50HZ
Total power 10KW 15KW
Air source Max 5.5kg/cm25m3/min
Unwinding numbers can be 1 roll,2roll,4 rolls loading
Power supply Three phases four lines air switch, 380V / 50Hz (can be made according to users
The A4 paper cutting machine consists of a paper roll clamp, an automatic tension controller, and a high-precision paper cutting system. This production line can connect to an A4 paper packaging machine.
What is a A4 Paper Cutting Machine?
1. A4 Paper Cutting Machine is a machine used to cut paper from one roll to another. This type of cutter is essential in the printing and packaging industry, as it bridges the gap between paper mills and offset printing machines.
2. Paper mills produce paper in large rolls, while offset printing machines are used to print on paper. To connect these two fundamental components, a paper roll to a paper roll cutter is necessary. The A4 Paper Cutting Machine allows for the efficient conversion of large rolls into smaller, more manageable rolls that can be easily loaded into printing machines.
3. The A4 Paper Cutting Machine is considered auxiliary machinery in the printing and packaging industry. It plays a crucial role in ensuring the smooth operation of printing processes by providing a consistent supply of paper in the desired size and format. Without this machine, the workflow between paper mills and printing machines would be disrupted, leading to potential delays and inefficiencies in production.
4. The A4 paper cutting machine helps to cut the paper into the specified size.If you are using a computerized machine, it becomes easier to achieve this.You enter the size you want, and the machine will complete the remaining work. The output depends on the efficiency of the machine.Most machines can cut paper and cardboard into suitable sizes.
Features of the A4 paper cutting machine include:
High precision: It can ensure the accurate size of the cut paper.
Automation: It adopts PLC control system to realize automatic operation and improve efficiency.
Safety: It is equipped with a variety of safety devices, such as infrared photoelectric protection, overload protection, etc. to ensure safe operation.
Versatility: In addition to A4 paper, it can also cut other sizes of paper or materials
Introduction:
ROYAL PACKING is professional producer for This paper roll cutting machine which is suit for cutting big rolling packaging materials such as paper, PVC, PET film paper plastic, multicolor laminated material, etc. It adopts servo motor(or step motor)
Performance and Characteristics:
This paper cutting machine (paper sheeter, sheet cutting machine) is suitable for horizontal and vertical cutting rolling materials such as, chrome paper, coated paper and kraft paper, etc. It's much more suitable for production of paper making and paper process industry. Adopts pneumatic automatic materials in system with much easy operation and convenience. Adopts imported heavy vertical type cutters with orderly finished products and without water caltrop; Meantime, it can be used for horizontal cutting and vertical cutting at one time. With both advanced work control system and computer control for electrical system section. Frequency converter timing system combined with servo motor so that this machine can be synchro operation. It has the functions of high-precision of cutting, high speed, etc. Pneumatic structure combined with micro-computer control be adopted for transmission section, making it become much more steady operation. It has the function of automatic stacking which is in order. Photoelectric auto tracing subtense system.
Main Technical Parameters:
Model RYHQ-1100A RYHQ-1300A
Max cutting width 1100mm 1300mm
Max diameter of unwinding 1400mm 1400mm
Cutting length 200-1200mm 200-1200mm
Cutting speed 10-140times/min 10-140times/min
Cutting precision ±0.2mm ±0.2mm
Range of raw material thickness 80-500g/ 80-500g/
Height of stacking Max.1200mm Max.1200mm
Total power 7.5kw 8.5kw
Weight (approx. ) 3500kg 3800kg
Overall dimension(LxWxH) 7400-3100-2000mm 7400-3300-2000mm
Design and specifications are subject to change without notice.
Machine performance:
Knife-seat guiding structure with sliding block type, cam type for adjusting-knife mechanism.
Clamp press paper stack through hydraulic system, the spring re-position.
Worm gear drive mechanism, hydraulic clutch, mechanical brake.
WESSEL hydraulic system from Germany (optional), Italy oil pump.
Switzerland ABB main motor(optional).
One-piece, slotless and chrome-plated cast iron work table is sturdy and easy to maintain.
Import ball screw with double linear guides to drive backgauge.
Whole sealing safety guard for rear work table (optional).
Germany LEUZE infrared protection device(optional).
Main electronic units are from French TE and Japanese ORMON famous international brands.
Introduction
This machine is used for cutting paper drum into required length.
Specification:
Model FQ-450
Paper Tube Diameter Ï?280mm-Ï?450mm
Work Mode Manual
Speed 200pcs/hour
Motor Power 1.1KW/380V/50HZ/3Phase
Weight ~400KG
Description:
Perforated Kraft Paper for Garment Automated Cutting Department
Product details:
white/brown color
Round/triangle holes: 5mm diameters per hole
the base paper for perforating is kraft paper with recyclable feature, cheap but good quality
Base paper gsm:45-120gsm(Recycled Kraft Paper/Wood Free Paper)
Roll width: our perforating machines are 2320mm(91inches)
Roll weight:20-50kgs small roll for garment manufacturers, >300kgs per roll for paper distributors
Related products:HDPE Film, plotter paper,interleaving tissue paper
Application:CAM CAD Cutting Table Underlayer with HDPE Film
Certificate: FSC SG
Contact:
Perforated Kraft Paper advantages
1.Our Perforated kraft paper provides very good performance and excellent air flotation on all automated cutting systems,will keep your cutting operations efficient and productive;
2.Our holes are made by Punch machines,they are to assure the air inside the fabric come out easily,so that assured the accuracy of cutting;
3. This is B grade of Perforated kraft paper which is rough and not easy for move on cutting table.
Whether cutting by hand or with automatic equipment, our company has the supplies you need for your cutting room. We convert all of our paper products including kraft, perforated kraft and separating tissue.
XinWu Perforated/Punched Kraft Paper
Application:Lectra/Gerber/Yin Machies etcâ?¦CAD CAM Garment Cutting Table Underlayer with HDPE Vacuum Film
FAQ for perforated kraft paper
Q: How to apply the perforated kraft paper when cutting?
A: It is designed to allow the right amount of airflow while protecting the bottom ply of fabric stabilizing the fabric on the top of
the bristle block.
Q: What is the feature of the perforated kraft paper?
A: Perforated Kraft underlay paper provides optimum performance and excellent air flotation on all automated cutting systems.
Q: What is the details of the perforated kraft paper sold in XW PAPER?
A: 007B Perforated kraft paper
Size:1600mm/1830mm/or as customers' requirements
Standard roll: 3inches inner core(76mm), 20-40kgs per roll
Hole standard: round hole diameter 5mm, perfect round shape.
Advantages of machine:
1. Roll paper cutting machine adopts ac servo motor drive, working speed is fast and stable.
2. Machine with germany precision cutter to achieve high cutting precision, ± 0.5mm.
3. Machine with three groups of knives for trimming and cutting feeding paper.
4. Machine with touch type computer interface to make simple operation;
5. It has the configuration of tension control system than the same kind to make feed smoothly and precision cutting.
6. Reducer transmission machinery’s service life more 10 years than the same kind at least.
7. The lifting platform adopts chain transmission (peer initiate). It is more durable and more convenient to maintain than the traditional hydraulic cylinder control network.
8. The highest cutting speed: 400 pieces/ min (peer initiate).
---stored program control with double hydraulic system and dual system--
This series of machine adopts whole unslotted worktable, and paper feeding system is surrounded by double guide rail. Its characteristics are high-speed paper feeding and precise positioning.
The cutting system adopts the high wearable worm wheel gear reducer. Friction clutch is controlled through hydraulic system so as to achieve a wide range of cutting pressure adjustment. The paper’s pressing pressure can be adjusted from 200n to 55000n, which can ensure the cutting quality. The cutting working is operated by synchronous button by double hands, with infrared control. And the machine is installed with safe devices such as electronic knife lock and single recycle cutting. It has features of low noise, large cutting power, high precision, sturdy and durable, safe and reliable. Customers can choose the electric appliance from france, germany, japan and high speed ball screw from taiwan, all these machines are according to european hydraulic system safety certificate.
Paper cutting machine size 32" with motor and standard accessories one extra blade, tool kit and wood handle.Available in all sizes18", 20", 26", 32", 33", 36", 42" .Contact +91-9914740141 or visit our website: royalec.Com
Introduction:
ROYAL PACKING is professional producer for This paper roll cutting machine which is suit for cutting big rolling packaging materials such as paper, PVC, PET film paper plastic, multicolor laminated material, etc. It adopts servo motor(or step motor)
Performance and Characteristics:
1. This paper cutting machines is suitable for cutting big rolling packaging materials such as paper, paper board, kraft paper. Culture paper, Printing paper, laser paper, aluminium foil paper laminated paper, etc. Widely used in paper industry and printing industry.
2. Adopts EU and JAPAN electronic parts, more neatly control with computer and mechanical technic
3. Automatic photocell tracing.
4. AC servo motor drive, high speed cutting steady
5. Adopts imported precision cutting blade, it is in high precision
6. PLC control with touch screen, easy operation
7. Compare with other models, this machine equipped with automatic side guiding system, and tension control system, paper delivery well, and cutting exactly
8. It adopts shaftless shaft loading paper rolls( can be 2 rolls together)
9. It has the functions of easy operation, high precision, good stability, low noise.
Main Technical Parameters:
Machine Model RYHM-1400 Model
Maximum width of roll 1450 mm
Machine power 15kw
Machine weight About 12000kg
Overall size 9500-3300-1800 mm
Power supply 380v/220v/50Hz (three phases)
can be made according to customers customer
Air pressure Max 5.5kg/cm2-5m3/min
Max diameter of roll material 1800 mm
Material thickness scope 50g/600g/according to different material
Cutting Length 4501400mm
Cutting Precision ±0.5mm
Unwind roll inner core 3or 6or according to customer
Cutting speed 350times /min
Cutting style Lower cutter fixing, upper cutter is rotary
Unwinding rolls 2rolls
Height of stacking 1300mm
Detail
DCH10 series card paper box cutting machine is mainly for the card paper and thin plastic box cutting application. It good used in the thin and homogenous material. It s very capable for the low cost sample making, although the cutting material is homogenous, it has the bright point for the specify material. This machine can cut and crease the materials of card paper, plastic film board etc, by the tool pen, creasing tool and special knife it comes with. Moreover, this machine can be used to as die cutting drawing.
A. RYHM-2A A4 paper cutting machine
A-1. Main Technical Parameter
Paper Width Gross width 860mm, net width 845mm
Cutting numbers 4 cutting-A4 210mm (width)
Paper rolls diameter Max.1500mm. Min.600mm
Paper cores diameter 3(76.2mm)or 6(152.4mm) or according to the clients demand
Packing Paper grade High-grade copy paper; High-grade office paper; High grade Free Wood paper etc.
Paper weight 60-100g/m2
Sheet length 297mm ( specially design for A4 paper, the cutting length is 297mm)
Ream amount 500 sheets Max. Height: 45-55mm
Production speed Max 0-250m/min(depends on different paper quality)
Max. Numbers of cutting Max 670/min
Output of the ream Max 30-34 reams/min
Load of cutting 500g/m2 (5100g/m2)
Cutting accuracy 0.2mm
Cutting condition No variation of the speed, no break, cut all the paper at one time and need the eligible paper.
Power 34KW
Air consumption 300NL/min
Air pressure 6 bar
Edge cutting 210mm
Safety standard Design according the safety standard of China
223771 Paper Cutting Machines Suppliers
Short on time? Let Paper Cutting Machines sellers contact you.
