Machine Performance:
Knife-seat guiding structure with sliding block type, cam type for adjusting-knife mechanism.
Clamp press paper stack through hydraulic system, the spring re-position.
Worm gear drive mechanism, hydraulic clutch, mechanical brake.
WESSEL hydraulic system from Germany (optional), Italy oil pump.
Switzerland ABB main motor(optional).
One-piece, slotless and chrome-plated cast iron work table is sturdy and easy to maintain.
Import ball screw with double linear guides to drive backgauge.
Whole sealing safety guard for rear work table (optional).
Germany LEUZE infrared protection device(optional).
Main electronic units are from French TE and Japanese ORMON famous international brands.
Technical Parameter:
Model:SQZK168GM20
Max.Cutting Width:168cm
Max.Cutting Length:168cm
Max.Cutting Height:165mm
Min.Cutting Size(without false clamp plate):30mm
Min.Cutting Size(with false clamp plate):90mm
Front Table Length:75cm
Max.Clamp Pressure:50000N
Max.Cutting Speed:42time/min
Main Motor:8.5KW
Net Weight:6200Kg
The main disposition sqsk-920 numerical control paper cutting machine main disposition
The chrome-plating work table, brings the air cushion electronic knife lock
Ball bearing lead screw, straight line guide rail (match)
Infrared electro-optic protective device
Refuels the installment stroker
Trades the knife organization conveniently safely
Optics to knife line
Has the time delay function and not redundant both hands carries the knife installment
Wear-resisting self-locking worm gear case
Shear bolt
Main electrical machinery and work table electrical machinery's over-load protection
Germany hydraulic system and italian oil pump (match)
Import electric appliance part
Monolithic integrated circuit control system
This machine adopts the technology of europe and it has 10. 4" or 15" display screen designed novelly, the color of screen can be matched. Programming 10, 000 groups to assure the stability of performance.
The paper delivering section is driven by AC servo motor so that, the noise can be reduced and the working speed can be increased highly.
The paper feeding accuracy of paper location can reach 0. 001mm around.
Hydraulic pressure section adopts the rapid pressure increasing system to finish the pressure regulation.
The electric control system adopts Panosonic PLC, relilable characteristic, large capacity, it can store data for about 300, 000 hours and can upgrade to perform remote monitoring.
The low pressure control section adopts OMRON, LG, TOSHIBA, SCHNEIDER, BDI to make the control stably and efficient.
Model: CHM-92CD/115CD/137CD
Main specification:
Cutting width: 92cm/115cm/137cm
Paper feeding depth: 92cm/115cm/137cm
Master power: 3kw/4kw/4. 5kw
Min. Paper-weight pressure: 150dan
Max. Paper-weight pressure: 4000dan/4500dan/5500dan
Cutting accurancy: 0. 2mm tolerance.
Min. Cutting datumn 2. 5cm/2. 5cm/3. 0cm
Cutting speed: 45cuts/min
Voltage: 360-400V.
1.This a4 paper cutting machine adopts the servo motor (or stepless motor) to control the fixed-length cutting, feeding.It is equipped with the photoelectric, correction, tracing modifying system. It can do crosscutting and vertical cutting at the same time.And it can trace feeding institution with the products, blowing& absorbing transportation at same time, automatic collecting, robert automatic folding materials and cross transport to worktable.
2.Drive system use pneumatic system, photoelectric sensor to control, folding materials system use oil pressure to improve equipment..This machine integrates photo electric, liquid and gas as a whole, plc touching screen, and has the features of easy operationhigh-precision cuttingstate operation and low noise.
3.The machine has the feature of the motor frequency speed adjustment, automation counting, giving an alarm when stop and tension with digital indication.
4.All transitional rollers can be done in clients opinions to avoid surface injure.
5.This machine is very important to scratch of gloss photo paper.
The new and dynamic growth market of digital printing has also gained in every respect from the company undertaking only to produce the best possible machines. In the small and middle format sector, genuine, professional Non Programmable Non Hydraulic cutting machines are available at conditions which are very advantageous, both from a technical and economic point of view. These Machines completely work on Motorized Pressure.
Our compact Hydraulic Model Paper Cutting machines are distinguished by the same high quality standards which are valid for the construction of Programmable Hydraulic cutters: Sturdy construction and future-orientated platform for simple workflow integration.
Introduction:
This machine is specialist for horizontal and vertical cutting paper rolling materials to A4, A3, A2 size etc. it can be with 1 roll, or 2rolls, or 4 rolls etc
Main Technical Parameters:
Model RYQJ-1100D RYQJ-1400D
Max unwinding diameter 1100mm 1400mm
Reference weight of cutting paper 40~500g 40~500g
Max cut width 1150mm 1450mm
Cutting length 20-1000mm 20-1000mm
Cutting speed 10-150times/min 10-150times/min
Cutting precision ±0.2mm ±0.2mm
Voltage: AC380V/220V x 50HZ AC380V/220V x 50HZ
Total power 10KW 15KW
Air source Max 5.5kg/cm25m3/min
Unwinding numbers can be 1 roll,2roll,4 rolls loading
Power supply Three phases four lines air switch, 380V / 50Hz (can be made according to users
The A4 paper cutting machine consists of a paper roll clamp, an automatic tension controller, and a high-precision paper cutting system. This production line can connect to an A4 paper packaging machine.
What is a A4 Paper Cutting Machine?
1. A4 Paper Cutting Machine is a machine used to cut paper from one roll to another. This type of cutter is essential in the printing and packaging industry, as it bridges the gap between paper mills and offset printing machines.
2. Paper mills produce paper in large rolls, while offset printing machines are used to print on paper. To connect these two fundamental components, a paper roll to a paper roll cutter is necessary. The A4 Paper Cutting Machine allows for the efficient conversion of large rolls into smaller, more manageable rolls that can be easily loaded into printing machines.
3. The A4 Paper Cutting Machine is considered auxiliary machinery in the printing and packaging industry. It plays a crucial role in ensuring the smooth operation of printing processes by providing a consistent supply of paper in the desired size and format. Without this machine, the workflow between paper mills and printing machines would be disrupted, leading to potential delays and inefficiencies in production.
4. The A4 paper cutting machine helps to cut the paper into the specified size.If you are using a computerized machine, it becomes easier to achieve this.You enter the size you want, and the machine will complete the remaining work. The output depends on the efficiency of the machine.Most machines can cut paper and cardboard into suitable sizes.
Features of the A4 paper cutting machine include:
High precision: It can ensure the accurate size of the cut paper.
Automation: It adopts PLC control system to realize automatic operation and improve efficiency.
Safety: It is equipped with a variety of safety devices, such as infrared photoelectric protection, overload protection, etc. to ensure safe operation.
Versatility: In addition to A4 paper, it can also cut other sizes of paper or materials
