OLT ZTE C320 OLT GPON With GTGO GTGH 8 Ports 16 Ports 32 ports 1G 10G DC Uplink Board with U31 zte olt zxa10 c320
Products Description:
With the requirements of communication services increasing, the value-added services (VAS) including 3D network games, video conference/phone, Video on Demand (VoD) and IPTV are key means for operators to provide differential services to attract more subscribers, and gain income growth.
ZTE ZXA10 C320, a small size, full-service optical access convergentplatform, provides carrier class QoS and reliable network to meet the requirements for small-scale implementation of FTTx services.
Unified platform for GPON,XG-PON1 and P2P
Small size andcompact design, flexible network and fast deployment
2U frame with 2 service slots, compatible with ZXA10 C300 line cards
Abundant service support capability: IPTV, VoIP, HSI, VPN, mobile backhaul, etc
Higher security assurance: ONT authentication, user ID identification, port isolation, address binding, packet filtering, and broadcast packet suppression.
High reliability: key parts redundancy; support Type B and Type C protection for PON downlink and LACP/ UAPS/STP/ERPS for uplink
Service differentiation: Comprehensive QoS mechanisms for voice, video and high speed Internet services.
Support DC input redundancy
Support AC power supply
Support 1:1 protection for PON interfaces
Support 1:1 protection for SW (core card) card
Support 1588V2 and Synchronous Ethernet
Support embedded OTDR in SFP
Syetem Architecture:
Capacity:
GPON up to 32 ports
Uplink interfaces up to 4 *GE (Optical )+2*GE(Electronic) or 2*10GE(Optical )+2*GE(Optical ) +2*GE(Electronic)
Chassis Configuration (19â??):
Total 5 slots
2 slots for universal line cards
2 slots for switch& control cards
1 slot for fan module
Subscriber Card Density:
GPON card: 8/16 ports per card
XG-PON1 card: 8 ports per card
P2Pcard: 24/48 ports per card
Uplink interface card:
1*10GE optical port ( Configurable 1*GE optical port)
1*GE optical port
1*10 M/100 M/1000 M electrical Ethernet port
Common interfaces:
1*environment detecting interface
1*management interface
1*maintenance serial interface
Place of Origin:Guangdong, China (Mainland)
Brand Name:Huawei
Model Number:MA5680T
Material(frame):METAL
Support:multiple access methods
Support2:multiple scenarios
Similar model:C300
Compatible ONU:Huawei series
slots:14U , 16U
GUI NMS:iManager U2000
Warranty:1 Year
Application:Fiber Optic Equipment C++ Module Gpon Epon Huawei MA5680T
Place of Origin:Guangdong, China (Mainland)
Brand Name:Fiber home
Model Number:AN5516-04, 2 Pon 4 Pon Gpon OLT, Mini size C+ C++ Module AN5516-04 OLT For Sale
Uplink:HSUA/HUSB/HUSC
Working voltage:DC48V or DC+AC
Application::FTTH FTTX Network
Support:Gpon/Epon
service slot:2
Warranty:1 Year
Operating humidity:5%RH~95%RH
Dimensions (W x D x H):65*45*24cm
Servie:EPON/GPON/10G PON/P2P
Place of Origin:Guangdong, China (Mainland)
Brand Name:Huawei
Model Number:MA5608T
Uplink:1GE 10GE uplink
Working voltage:DC48V or DC+AC
Application::FTTH FTTX Network
Support:Gpon/Epon
Power boards:PRAM
Warranty:1 Year
Operating humidity:5%RH~95%RH
Dimensions (W x D x H):600*390*250mm
Fiber Type:SM MM
Afg3308p provides 8 gpon ports and 8 ge based-t& 8 ge sfp uplink ports to meet for the increasing demand on high-bandwidth from end user, with the 1ru cassette design and redundant 2 slots making afg3308p to be flexible deployment and multifunctional. Built as the compact gpon olt platform using broadcom chipset designed for different type carrier in isp market, the reliable testing of mtth and mttb ensure the afg3308p working stably and smoothly.
Support power redundancy
Support 10ge uplink
Support rich l2/l3 switching function(static qinq and flexible qinq); powerful multicast
Services capabilities (igmpv1/v2/v3, igmp snooping, mvr multicast); support dhcp
Option 82 and pppoe+
-
129 Olt Zte C320 Gpon Olt Suppliers
Short on time? Let Olt Zte C320 Gpon Olt sellers contact you.
Product features:
Highly reliable case, strong adaptive capacity to environment
1u case, good shielding measures.
Layer 2 aggregation switching
Layer 2 wire-speed forwarding; support rich layer 2 protocols
4k mac address list
Uplink port supports electronic port modules and optical port modules, which can be configured flexibly as required
Perfect network management function
Support gui based graphical interface¡¡ê
Support in-band management, out-of-band management
Support online upgrade of device software
Strong qos function
Support flexible dba, uplink and downlink traffic rate-limited
Support ip tos, ieee802.1p
Port based traffic control, traffic shaping¡¡ê
Supports up to 256 llid.
Rich oam function
Support onu automatic identification, automatic finding, and automatic registration
Support the function of automatic loop back test to single link
Strong vlan function, including vlan stacking, trunk, translation
Support flexible controllable multicasting, support igmp snooping
Port features:
1 pon ports (1.25g)
1 uplink ports (1g) (electronic ports and optical ports options)
1 management ports (special software management)
1 console port
Physical features:
EPS30-4815AF Power System
The AC-powered cabinet uses the EPS30-4815AF power system to convert the AC input into the DC power for power distribution.
The Emerson EPS30-4815AF Power system converts compatible with:
Huawei OLT MA5600, MA5680T, MA5683T, MA5608T
Huawei DSLAM:MA5616
ZTE OLT: ZXA10 C300, ZXA10 C320, ZXA10 C220
ZTE DSLAM: 9806H
Function
The EPS30-4815AF power system converts one AC input into two DC outputs to implement the DC power distribution. It can be connected to one set of batteries and use its monitoring module to manage the batteries.
Original Huawei OLT MA5608T Power Converter 110V-220V AC to DC 48V 15A 30A Emerson EPS30-4815AF$
The EPS30-4815AF power system can also use the external sensor transfer box to collect and report the status of sensors and standby detected parameters.
NOTE:
The rectifier modules of the EPS30-4815AF power system work in the load balancing and mutual hot backup mode.
Appearance
Figure 4-1 shows the appearance of the EPS30-4815AF power system.
Figure 4-1 Appearance of the EPS30-4815AF power system
Place of Origin:Guangdong, China (Mainland)
Brand Name:ZTE
Model Number:C300, ZTE C300
Light Wavelength:Upstream: 1310, Downstream: 1490
Working voltage:48v
Application::FTTH FTTX Network
Fiber Connector:SC/APC
Warranty:1 Year
Operating humidity:5%RH~95%RH
Support:Gpon/Epon
Dimensions (W x D x H):443.7*482.6*270mm
Similiar Model:MA5680T
Place of Origin:Guangdong, China (Mainland)
Brand Name:Huawei
Model Number:MA5683T
SCUN:control and uplink board
Operating humidity:5%RH~95%RH
service:voice/CATV/Ethernet/NGN
Application::FTTH FTTB FTTX Network
Power Supply:-48V DC (-40V~-57V)
Dimensions (W x D x H):263 mm x 442 mm x 283.2 mm
Similiar Model:MA5680T
GICF:uplink board(none module)
Warranty:1 Year
Oil testers bring out accurate and repeatable results of measured breakdown voltage. Fast high-voltage switch off time makes it possible to carry out test of dielectric liquids, which are easily destroyed under such influences.
The internal design of olt testers combined with a use of automatic high voltage breakers, cutting off supplied voltage if tester?s lid has been opened during the test, provide operator with high level of safety.
Testers are fully equipped and are ready for operation right after unpacking. They come with a test vessel (iec 60156 ? basic configuration) with vde 0370 mushroom-shape electrodes. A gap between electrodes is easily regulated with a use of pass-no pass gauge, which comes in pack.
A-series provides with fully automatic test procedure according to selected standard (basically iec 60156 and gost 6581 settings are preloaded). It has a built-in printer which is able to print a test report after procedure is done. Test results are saved into non-volatile memory of olt oil tester. A pc-connectivity makes it easy to collect data from olt oil tester, save and store them as well as print a fulfilled report. Test voltage is being measured directly on electrodes. This fact combined with a true sine voltage shape (independent from supply voltage shape), increases repeatability and accuracy of measurements.
Test vessel for this series goes with magnetic stirrer, which stirs a liquid between two measurements.
Main features:
Compact and lightweight
Fully automatic operation
Fully compatible with iec 60156
Preloaded testing programs for different standards
Built-in printer
Pc connectivity
Internal test data storage
Precise direct voltage measurement
True sine high-voltage on electrodes
Oil temperature measurement
Oil testers bring out accurate and repeatable results of measured breakdown voltage. Fast high-voltage switch off time makes it possible to carry out test of dielectric liquids, which are easily destroyed under such influences.
The internal design of olt testers combined with a use of automatic high voltage breakers, cutting off supplied voltage if testerâ??s lid has been opened during the test, provide operator with high level of safety.
Testers are fully equipped and are ready for operation right after unpacking. They come with a test vessel (iec 60156 â?? basic configuration) with vde 0370 mushroom-shape electrodes. A gap between electrodes is easily regulated with a use of pass-no pass gauge, which comes in pack.
A-series provides with fully automatic test procedure according to selected standard (basically iec 60156 and gost 6581 settings are preloaded). It has a built-in printer which is able to print a test report after procedure is done. Test results are saved into non-volatile memory of olt oil tester. A pc-connectivity makes it easy to collect data from olt oil tester, save and store them as well as print a fulfilled report. Test voltage is being measured directly on electrodes. This fact combined with a true sine voltage shape (independent from supply voltage shape), increases repeatability and accuracy of measurements.
Test vessel for this series goes with magnetic stirrer, which stirs a liquid between two measurements.
Main features:
Compact and lightweight
Fully automatic operation
Fully compatible with iec 60156
Preloaded testing programs for different standards
Built-in printer
Pc connectivity
Internal test data storage
Precise direct voltage measurement
True sine high-voltage on electrodes
Oil temperature measurement
l With 4 PON ports or 8PON ports.
l Support 256/512 ONUs (1:64 splitting retio, 10km transmission distance).
l Provide 8GE uplink ports and and 8 SFP Combo ports.
l L2 full-line-speed ability
l MAC address table: 16K
l VLAN support: 4096
l ONU auto find and auto register.
l Support dynamic bandwidth distribution.
l Support online upgrade and batch upgrade
l Support in-band and out-of-band management interface
l Support CLI, TELNET,EMS management mode.
l Support dual-redundancy
Place of Origin:Guangdong, China (Mainland)
Brand Name:ZTE
Model Number:F660(V6.0)
Configuration:1GE+3FE+1POTS+USB+WIFI
Application:FTTH FTTB FTTX Network
Support:IEEE802.11b/g/n
Condition:Brand new
PON interface:SC/UPC
Power adapter:EU,US,UK,AU
WIFI:Internal Antenna
Warranty:1 Year
Other Name:Fiber Optic equipment
Device management function:EMS / WEB / CLI Network management
Weight (Full-Loaded): 4.5kg
Max splitting ratio:1:64
Connector Type:4 SFP 1000BASE PX20/PX20/PX20
AC Power Supply:input100 240V 47/63Hz
Power Consumption: 45W
Warranty:1 Year
Product Overview
EPON OLT is a high integration and medium capacity cassette EPON OLT designed for operators access and enterprise campus network. It follows the IEEE802.3 ah technical standards and meets the EPON OLT equipment requirements of YD/T 1945-2006 Technical requirements for access network based on Ethernet Passive Optical Network (EPON) and telecom EPON technical requirements 3.0. EPON OLT series possesses excellent openness, large capacity, high reliability, complete software function, efficient
bandwidth utilization and Ethernet business support ability, widely applied to the operator front-end network coverage, private network construction, enterprise campus access and other access network construction.
The OLT provides 8 downlink 1.25G EPON ports, 8 GE LAN Ethernet ports and 4 10G SFP for uplink. The height is only 1U for easy installation and space saving. It adopts the advanced technology, offering efficient EPON solution. Moreover, it saves a lot cost for operators for it can support different ONU hybrid networking.
Short Description:
EPON OLT is high integration and medium capacity cassette EPON OLT designed for operators access and enterprise campus network. It follows the IEEE802.3 ah technical standards and meets the EPON OLT equipment requirements of YD/T 1945-2006 Technical requirements for access network based on Ethernet Passive Optical Network (EPON) and China telecom EPON technical requirements 3.0. EPON OLT series possesses excellent openness, large capacity, high reliability, a complete software function, efficient bandwidth utilization and Ethernet business supportability, widely applied to the operator front-end network coverage, private network construction, enterprise campus access and other access network construction.
Product Overview:
EPON OLT is high integration and medium capacity cassette EPON OLT designed for operators access and enterprise campus network. It follows the IEEE802.3 ah technical standards and meets the EPON OLT equipment requirements of YD/T 1945-2006 Technical requirements for access network based on Ethernet Passive Optical Network (EPON) and China telecom EPON technical requirements 3.0. EPON OLT series possesses excellent openness, large capacity, high reliability, a complete software function, efficient bandwidth utilization and Ethernet business supportability, widely applied to the operator front-end network coverage, private network construction, enterprise campus access and other access network construction.
There are two kinds of specifications OLT. The OLT provides 4/8 downlink 1.25G EPON ports, 8 * GE LAN Ethernet ports and 4 *10G SFP for uplink. The height is only 1U for easy installation and space-saving. It adopts advanced technology, offering an efficient EPON solution. Moreover, it saves a lot of cost for operators for it can support different ONU hybrid networking.
Coke
We arre offering green petroleum coke, calcined petroleum coke and metallurgical coke.
Our calcined petroleum coke has the following specifications :
Type 1
Carbon : 98.599 %
S : 0.05 %
Vm : 0.5 %
Ash 0.5 %
Moisture : 0.5 %
Any size between 012 mm
Type 2
Carbon : 8295.45 %
S : 0.31.5 %
Vm : 1.23.5 %
Ash 315 %
Moisture : 0.255 %
Any size between 040 mm
You can ask for any specification with carbon, s, vm, ash, moisture and any size between the one in type 1 or 2.
We also can offer you graphite electrodes. For mode details please reply.
Pricing depends on type of coke, quantity and delivery terms.
Bulk or big bags at 1 mt each
129 Olt Zte C320 Gpon Olt Suppliers
Short on time? Let Olt Zte C320 Gpon Olt sellers contact you.
