Shenzhen XDK Communication Equipment Co., Ltd.

Submarine communications and telecommunication.

This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct Buried type Fiber Optical Cables are designed for easy and economical installation.

The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of Dry Water Block Technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation.

The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel Tape Armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra Strength cable can also be delivered with Peripheral Strength Members.

Features & Application

òExcellent optical, mechanical & environmental performance
òHigh strength-to-weight ratio
òCSM dielectric type û Fiber Reinforced Plastic
òDry block construction
òHigh tensile strength
òHigh crush strength
òCorrosion resistance
òKINK resistance
òVery light weight
òVery flexible & small bending radius
òLong haul / backbone application
òJunction communication systems
òAll dielectric applications
òCATV applications.

Construction Parameters

Fiber Count 02 û 144 Fibers
Color of Loose Tube Blue , Orange , Green , Brown , Grey , White, Red & Black
Loose Tube Material Polybutylene Terephthalate (PBT)
Loose Tube Filling Material Thixotropic Jelly
Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE)
Central Strength Member Fiber Reinforced Plastic (FRP) û Non Metallic
Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes
Second (Outer) Sheath Material High Density Polyethylene (HDPE)
Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing
Nominal Cable Delivery Length (km) 4 KM ¦ 3%.

This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct buried type fiber optical cable are designed for easy and economical installation.

The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of dry water block technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation.

The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel tape armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra strength cable can also be delivered with peripheral strength members.

Features & application

Excellent optical, mechanical & environmental performance
High strength-to-weight ratio
Csm dielectric type û fiber reinforced plastic
Dry block construction
High tensile strength
High crush strength
Corrosion resistance
Kink resistance
Very light weight
Very flexible & small bending radius
Long haul / backbone application
Junction communication systems
All dielectric applications
Catv applications.

Construction Parameters

Fiber Count As per CustomerÆs Requirement
No. of Loose Tube As per CustomerÆs Requirement
G.655 As per CustomerÆs Requirement
G.652 As per CustomerÆs Requirement
Loose Tube Material Polybutylene Terephthalate (PBT)
Loose Tube Filling Material Thixotropic Jelly
Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE)
Central Strength Member Fiber/Glass Reinforced Plastic (FRP/GRP)
Armoring Corrugated Steel Tape Armoring
Peripheral Strength Member (if required) Aramid / Glass Yarn
Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes
Outer Sheath Material High Density Polyethylene (HDPE)
Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing
Nominal Cable Delivery Length (km) 4 KM ¦ 3%.

Product description

This cable has been designed for aerial application with flat type construction. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. This aerial type fiber cable is designed for easy and economical installation with a sufficient tensile strength to overcome wind pressures and ice loadings.

Features & application

Excellent optical, mechanical & environmental performance
Csm dielectric type û fiber reinforced plastic
High tensile strength
High crush strength
Aerial application
Application in lan, wan, especially in ftth networks
Easy to clamp and install
Can bear ice loads and high wind pressures.

Construction Parameters

Fiber Count 02 to 12 Fiber
Fiber Type G.652.D
Loose Tube Material Polybutylene Terephthalate (PBT)
Loose Tube Filling Material Thixotropic Jelly
Sheath Material High Density Polyethylene (HDPE)
Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing
Nominal Dimensions Width : 7.0 + 0.5mm , Height : 3.5 + 0.3mm
Nominal Cable Delivery Length (km) 2 KM + 3% .

Mechanical Characteristics

Tensile Strength (N) 600
Tensile Strength (N) (Installation) 1000
Crush Strength (N) 2,000
Minimum Bending Radius (mm) 75
Temperature Operating Range -10 to +70¦C.

Cable type
G.652d/g657a, pvc, lszh, simplex or duplex, 0.9, 2.0, 3.0mm
Fiber type
Smf-28e, sm 9/125um, mm 50&62.5/125um
Polish method
Upc, pc, spc, apc
Connector
Fc, sc, lc, st, e2000, din, d4, sma, fddi, mpo/mtp
Insertion loss
0.1db (for single mode master)
0.25db (for single mode standard)
0.25db (for multimode)
Return loss
(for single mode)
Upc 50db
Spc 55db
Apc 60db (typ.65db)
Repeatability
¡¨¤0.1db
Operating temperature
-40 c to 85 ¡ãc
Geometry requirement
(for single mode)
Ferrule end face radius7mm r 12mm (for apc)
10mm r 25mm (for standard)
Apex offset 30 |¨¬m (for master)
Apex offset 50 |¨¬m (for standard)
Undercut -50nm u 50nm

1pc/plastic bag, 1500pcs/carton box

Fiber Optic Cables

Fiber Optic Patch Codes

Widely used in the city and country cable network
The data and graph transfer system, the catv wired tv series
The direct and branch connection of the indoor cable, which acts as pigtail storage and connector protection
It is made of cold-rolled steel sheets by electrostatic plastic spraying
And has proper structure and neatly-looking
We can fix the cable by strengthening core in the terminal box, and its ports can be replaced according to the practical engineering requirements.

Product Explanation

GHT Connector Box cable is production based on YD/T814.1-2004 standard, through a third partycertification, fully to meet and surpass these standards. This series applies to telecom networks, local are a networks, FTTx, TVs, test equipment, fiber-optic sensor CATV optical fiber and rescure, such as optical fiber transmission systems, achieve the middle joints, distribution, and protection of the realization of optical fiber cable line, doing a good job in a variety of harsh environments, and fully into account in the design of simplified operation, flexible configuration requirements.

Product Characteristic

>Housing made of high quality and special material, high strength, corrosion resistance, ageing resistance, 

 fire prevention, can be adapted to a variety of harsh environments


>Made of high quality stainless steel screws and hooks, imported sealing, the sealing property is reliable

>Horizontal or cap-style structure can meet the directly buried, pipelines(tunnel), wall-mounted or overhead installation environment

>Leniency splice tray designed to ensure fiber bending radius â?¥40mm, full protection device

>Set the perfect fiber-optic fixed and strengthen the core, stripping, grounding protection device

>Set the repeat opening device and embedded sealing strip, repeated opening convenient, labor-saving, good packing performance

>Applies to both single-core and multicore and fiber, can support a manximun number of cores 288 cores

>Operation and maintenance convenient and fast