MS Seamless Pipe PINAMAEXIM
Our MS seamless pipes are manufactured from high-quality, low-carbon billet, extruded and hot-rolled without any welds to produce a strong, precision-engineered tube. With sizes ranging from 1/2 to 24 OD and wall thickness up to 20mm, they meet IS 1239, ASTM A53, and API standards . Featuring uniform wall thickness, excellent pressure tolerance (+20% vs welded), and superior strength, they are corrosion-resistant and suitable for coatings. These pipes are ideal for critical applications oil & gas, boilers, and structural scaffolding. Durable, smooth, and dimensionally accurate, MS seamless pipes deliver long-lasting performance in demanding industrial environments.
MS Seamless Pipe PINAMAEXIM
Our MS seamless pipes are manufactured from high-quality, low-carbon billet, extruded and hot-rolled without any welds to produce a strong, precision-engineered tube. With sizes ranging from 1/2 to 24 OD and wall thickness up to 20mm, they meet IS 1239, ASTM A53, and API standards . Featuring uniform wall thickness, excellent pressure tolerance (+20% vs welded), and superior strength, they are corrosion-resistant and suitable for coatings. These pipes are ideal for critical applications oil & gas, boilers, and structural scaffolding. Durable, smooth, and dimensionally accurate, MS seamless pipes deliver long-lasting performance in demanding industrial environments.
Products Seamless pipe,welded pipe,Oil casing pipe,Fittings
Secification
1.Wall Thickness:STD,SCH40-SCH160 OD: 1/8"-48'
2.Length:3-12 (As per the Wall Thickness of pipes)
3.Pipe end:Plain, Bevel, Threading and without screw threading
4.Surface protect:3 Layer PE,Oil painting,Galvanized
Property
1.Material:ST37,ST42,S52
2.Tensile strength:335-600Mpa Yield strength:205-345Mpa
3.Chemical composition:(C:0.07-0.2,Si:0.17-0.55,Mn:0.35-1.6)
Quality control
1.Standard:ASTM A106,ASTM A53,DIN1626,DIN17175,API
2.Pass ISO-9001Certificate
3.Third party inspection is available
Size: 1/2"-24".
Wall thickness:
Sch10~Sch160, XXS, XS, STD, SGP.
Or as per customer¡¡£¤s special requirement.
Standard: API, ASME B36.10M 1996, JIS, DIN, GB8162, GB8163, GB5310.
Material:
ASTM A106 GRB/ A53 GRB/ Q345/ Q235/ A335/ ST37/ ST52/ 20#/ 10#/ API 5L GRB, PSL1, X42, X52 ¡- etc.
Or as per customer¡¡£¤s special requirement.
Productive technology: Hot rolled, heat diffusion, cold-drawing, hot piercing
Packing: Plastic cap for both end, steel strips bundled.
Surface treatment: Black painting/coating, black rust-proof oil, hot galvanizing, 3PE, epoxy coating.
Application range: Petroleum, chemical, power, gas, stream, metallurgy, ship building, liquid, water transportation, structure, construction, etc.
Min Order Quantity: Normally 5 Ton or according to customer's requirement.
Delivery Time: Within 25 days after payment, or as per customer¡¡£¤s requirement.
Production Capacity: 80,000 Ton/Year.
Others:
1.Special design available according to requirement;
2.Anti-corrosion and high-temperature resistant with black painting;
3.All the production process are made under the ISO9001:2008 strictly.
We have professional pipe fittings and steel pipes production equipment in China, all of products are produced by ourself, so we can give you BEST price with BEST quality, hope we will co-operate with each other based on mutual benefits.
MS ERW (Mild Steel Electric Resistance Welded) pipes are produced by forming cold-rolled mild steel strips into tubes and fusing the seam via high frequency electric resistance welding . Available in diameters from �½ to 24 with wall thicknesses between 1.8- 12.7-mm, they come in standard 6-m lengths (customizable) and black mill finish, with optional galvanized coating .
These pipes deliver excellent tensile (330- 410-MPa) and yield (210- 240-MPa) strength, plus dimensional accuracy, cost efficiency, and recyclability . They are widely used in construction, water & gas distribution, industrial framing, agricultural irrigation, and automotive structures.
58894 Ms Seamless Pipe Suppliers
Short on time? Let Ms Seamless Pipe sellers contact you.
High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder
We are mainly for customers to provide a variety of pipelines. The pipes we sell include plastic pipes, PVC pipes, HDPE pipes, LDPE pipes, PE pipes, PPR pipes, PC pipes, ABS pipes, PA pipes, PU pipes, hoses, soft tubes, all kinds of plastic granule materials, and recycled regrind materials. Gi pipes, stainless steel pipes, seamless pipes, MS pipes, carbon steel, composited pipes, water tubes, corrugated pipes, fittings, valves, flanges, nuts, and screws. And other environmental plastic and stainless steel pipes
for residential construction households. With meeting international standard quality, the pipes are of different thicknesses, lengths, and applications.
High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder
High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder
High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder
High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder
Item Hot Dipped Galvanized Round Steel Pipe/GI Pipe/Galvanised Tube
OD 20~405mm in theory
Thickness 1.2~15.7mm
Length Any Length Below 16 Meter
Standard GB,ASTM,BS,EN,JIS
Material Chinese Grade, Q195, Q215 Q235, Q345
ASTM, Grade B,Grade C,Grade D,Grade 50
EN, S185,S235JR,S235JO,E335,S355JR,S355J2
JIS, SS330,SS400,SPFC590
Application Used For Water, Gas, Stream, Combustible Fluids And Other Liquid Delivery
Ends
Plain, Beveled, Thread With Couplings Or Sockets;
Plastic Caps And Steel Rings Can Be Provided If Possible
Surface Bared, Galvanized, Oiled, Color Paint, 3PE; Or Other Anti-corrosive Treatment
Technique Hot Rolled Or Cold Rolled ERW
Package Covered With Tarpaulin, Containers Or In Bulk
MS ERW (Mild Steel Electric Resistance Welded) pipes are produced by forming cold-rolled mild steel strips into tubes and fusing the seam via high frequency electric resistance welding . Available in diameters from ½ to 24 with wall thicknesses between 1.8- 12.7-mm, they come in standard 6-m lengths (customizable) and black mill finish, with optional galvanized coating .
These pipes deliver excellent tensile (330- 410-MPa) and yield (210- 240-MPa) strength, plus dimensional accuracy, cost efficiency, and recyclability . They are widely used in construction, water & gas distribution, industrial framing, agricultural irrigation, and automotive structures.
58894 Ms Seamless Pipe Suppliers
Short on time? Let Ms Seamless Pipe sellers contact you.
