Introduction:
Support bluetooth v4.0 low energy (ble 4.0) wireless standards.
Support slave and master mode operation.
Super low energy mode: 13.6ma rx current at 3v, 13.3ma tx current @0dbm at 3v.
Support multiple network protocols.
Support smart configure for network.
Support program’s remote upgrading.
Optional antenna: internal or external.
Support uart, pwm, gpio, ad and other interfaces.
Micro sizes: 12mm x 20mm x 3.5mm, smt.
Power supply: battery or 3.3v single supply.
Fcc certification.
Comply with rohs standard.
Access cloud platform for free.
Application:
Handheld devices
Personal medical
Internet of things
Wireless sensor & industrial control
Light control
The Module Is A Max.4Dbm( Class2 ) Module.
* Fully Qualified Bluetooth V2.0+Edr System.
* Integrated Switched-Mode Regulator.
* Integrated Battery Charger.
* Embedded Kalimba Dsp Co-Processor.
* Integrated 16-Bit Stereo Audio Codec
* 95Db Snr For Dac.
* Enhanced Audibility And Noise Cancellation.
* Integrated With 8M Bits Flash Memory.
* Support Host Interface: Usb Or Uart.
* Support Digital Audio Bus : Pcm, I2S Or Spdif.
* Hsp/Hfp/A2Dp/Avrcp Profiles Support.
* Rohs Compliant.
* Small Outline. 16 X 15 X 2 Mm.
* Applications
* High Quality Stereo Wireless Headsets.
* High Quality Mono Headsets.
* Hands-Free Car Kits.
* Wireless Speakers.
* Voip Handsets.
* Maximum of 4dbm (class2) module with antenna
* Bluetooth standard version 2.0 + edr compliant
* Low current consumption
* Hold, sniff, park, deep, and sleep mode
* 3.0v or 1.8 operation
* Supports for up to seven slaves: sco links (3), acl links and piconet (7)
* Interface: usb, uart and pcm (for voice codec)
* Hci or spp, hsp/hfp, hid and dun firmware is available
* For 802.11 co-existence
* Rohs compliant
* Small outline
Applications:
Pda, nb, and car kit
Presenter, mouse, and keyboard
Cordless headset, digital camera and printer
Access points
Gps, pos, and barcode reader
Data collector
Domestic and industrial applications.
305 Mitsumi Bluetooth Module Wml C46 Mitsumi Suppliers
Short on time? Let Mitsumi Bluetooth Module Wml C46 Mitsumi sellers contact you.
Bluetooth standard v2.1+edr.
Integrated switched-mode regulator.
Integrated battery charger.
Embedded kalimba dsp co-processor.
Integrated 16-bit stereo audio codec
95db snr for dac.
Enhanced audibility and noise cancellation.
Integrated with 8m bits flash memory.
Support host interface: usb or uart.
Support digital audio bus : pcm, i2s or spdif.
Hsp/hfp/a2dp/avrcp profiles support.
Rohs compliant.
Small outline. 21 x 16 x 2 mm.
Bluetooth ver. 2.0+edr certification
Transmit power up to +18dbm(class1)
Low current consumption:
Hold, sniff, park, deep sleep mode
3.0v to 3.6v operation
Full bluetooth data rate over uart and usb
Support up to 7 acl links and 3 sco links
Enhanced data rate(edr) compliant
For both 2mbps and 3mbps modulation modes
Interface: usb, uart&pcm( for voice codec)
Spp firmware with at commands
Rohs compliant
Small outline: 28.2 x 15.0 x 2.8 mm
Application:-
Access point
Domestics and industrial applications
Serial adapter
Gps, pos, barcode reader.
* Bluetooth standard Ver. 2.0 + EDR compliant.
* Low current consumption :
* Hold,Sniff,Park,Deep sleep Mode
* 3.0V or 1.8V operation
* Support for up to seven slaves :
* SCO links<3>,ACL links,Piconet<7>
* Interface: USB,UART&PCM(for voice CODEC)
* HCI or SPP,HSP/HFP,HID,DUN firmware is available
* Support for 802.11 Co-Exsitence
* RoHS compliant
* Small outline. 14 x 12 x 2.2 mm
Applications:-
* PDA,NB, Car Kit
* Presenter, Mouse, Keyboard
* for Cordless headset
* Digital camera & printer
* Access Points
* GPS,POS, Barcode Reader
* Data collector
* Domestic and industrial applications.
Range :transmission Distance Indoors As Far As 50 Meters As Far As 150 Meters (environmental Factors Influence) Outdoor 100-200m ( Theoretical Value)
Frequency:working Frequency 2.4 ~ 2.4835 Ghz
Consumption:ultra-low Power Consumption, 3.3vdc Operating Voltage
Antenna :external Antenna
Operation System :supports Windows 2000 / Xp/vista/windows 7 / Win Ce/linux/mac Os/android Operating System
Certification :comply Rohs, Reach Ce, Fcc Approved
Other:wifi+bt
Range :transmission distance indoors as far as 50 meters as far as 150 meters (environmental factors influence) outdoor 100-200m ( theoretical value)
Frequency:working frequency 2.4 ~ 2.4835 ghz
Consumption:ultra-low power consumption, 3.3vdc operating voltage
Antenna :external antenna
Operation system :supports windows 2000 / xp/vista/windows 7 / win ce/linux/mac os/android operating system
Certification :comply rohs, reach ce, fcc approved
Other:wifi+bt
Chipset:rtl8821as
Wifi standard:compatible with ieee 802.11b/g/n standard
Encrypted:support 64/128/152bit wep and wpa encrypted data, wpa2-psk wpa, wpa2 / wpa2 wpa2-psk
Interface:sdio interface, built-in wireless roaming (roaming) technology
Working mode:provide centralized control (infrastructure) and equation (ad hoc) working mode
Transmission rate:11b: 1/2/5.5/11mbps(dynamic) , 11g: 6/9/12/18/24/36/48/54mbps(dynamic) , 11n: the highest data rate can reach to 300mbps
Range :transmission distance indoors as far as 50 meters as far as 150 meters (environmental factors influence) outdoor 100-200m ( theoretical value)
Frequency:working double frequency 2.4 ~ 5.8 ghz
Consumption:ultra-low power consumption, 3.3vdc operating voltage
Antenna :external antenna
Operation system :supports windows 2000 / xp/vista/windows 7 / win ce/linux/mac os/android operating system
Certification :comply rohs, reach ce, fcc approved
Other:1t1r, wifi+bt
The TS-M1021 is a diminutive Bluetooth module, measuring merely 8 by 12 millimeters, designed for applications requiring minimal size and low power consumption, without compromising on cost-effectiveness. This module is renowned for its remarkable stability and wide-ranging compatibility. It comes with a default setting that facilitates Bluetooth serial port transparent transmission, allowing users to modify serial port baud rates, device names, and additional parameters using the supplied AT commands. This feature enables adaptable operation and straightforward implementation, making the module an ideal choice for a diverse array of customer development projects.
Model No.: TS-M1021
Features
Bluetooth Version: BLE 5.1
Frequency Band: 2.402GHz-2.480GHz ISM band
TX Power: -20dBm~+10dBm
Receive Sensitivity: -97dBm
Air Rate: 250Kbps/1Mbps/2Mbps
Antenna: Ceramic Antenna
Advise Range: 100m
Memory: 512KB FLASH+56KB RAM
Size: 12*8*1.5mm
Pin/GPIO: 12/7
Power Supply: 2.0~3.6V
Operating Temperature: -40~+85
Peripheral Interface: UART/I2C/ADC
Serial Transparent Transmission Rate: BLE 20KB/s
Applications
Smart home
Location tracking
Intelligent educational equipment
Measurement and monitoring system
Industrial sensors and controls
Medical equipment monitoring and wireless control
Bluetooth wearable devices manufacturer in shenzhen china, strong r&d team on hardware, firmware, software, supply oem/odm services.Welcome to contact us at anna at vicro dot cn
Product name:bluetooth display fitness pedometer
App: available on apple app store/google play.
blet along
- built-in st g-sensor to detect user's body movements, transfer to steps and distances
- built-in rechargeable 50mah lithium battery, support charging
TS-M1020D is an 8*12mm ultra-small size Bluetooth low power ultra-low cost Bluetooth module, the module is a Bluetooth 5.2 chip, integrated BLE+SPP dual Bluetooth protocol, with excellent stability and compatibility. Module default Bluetooth serial port transparent transmission, the user can change the serial port baud rate, device name and other parameters according to the provided AT instructions, flexible operation and simple use. Suitable for various development projects of customers.
Model No.: TS-M1020D
Features
Bluetooth Version: BLE 4.2+SPP 3.0
Frequency Band: 2.402GHz-2.480GHz ISM band
TX Power: -20dBm~+4dBm
Receive Sensitivity: -95dBm
Air Rate: 250Kbps/1Mbps/2Mbps
Antenna: Ceramic Antenna
Advise Range: 80m
Memory: 256KB FLASH+128KB RAM
Size: 12*8*1.5mm
Pin/GPIO: 12/7
Power Supply: 3.1~4.35V
Operating Temperature: -20 ~+85
Peripheral Interface: UART/SPI/I2C/ADC
Serial Transparent Transmission Rate: BLE 4KB/s, SPP 16KB/s
Applications
Smart home
Location tracking
Intelligent educational equipment
Measurement and monitoring system
Industrial sensors and controls
Medical equipment monitoring and wireless control
J&k ideal (hk) co., limited company is a professional manufacturer of audio products , includes :mp3/mp4 /mp5 module , amplifier board , wireless microphone module and bluetooth usb audio receiver dongle and bluetooth led bulb speaker and bluetooth produces and so on.Welcome inquiry more products !
Usb/sd /mp3/line in (aux)/fm/
Support bluetooth
Play music, support sd card and u disk, support mp3/wma/wav, support to play higher bit rate by 1410 kbps songs.
Recording function supports the highest bit rate for 192 kbps, recorder format wav
Formarts :wma / wav / mp3
Mp3 decorder support 32–320kbps
Fat16 or fat32 systems supported
With remote control
Mode: usb/sd /fm / line in bluetooth /recorder switch., in line in mode
Application : pro audio, amplifier, speaker, car audio, hi-fi system , audio mixer , guitai amplifier kit
