The Module Is A Max.4Dbm( Class2 ) Module.
* Fully Qualified Bluetooth V2.0+Edr System.
* Integrated Switched-Mode Regulator.
* Integrated Battery Charger.
* Embedded Kalimba Dsp Co-Processor.
* Integrated 16-Bit Stereo Audio Codec
* 95Db Snr For Dac.
* Enhanced Audibility And Noise Cancellation.
* Integrated With 8M Bits Flash Memory.
* Support Host Interface: Usb Or Uart.
* Support Digital Audio Bus : Pcm, I2S Or Spdif.
* Hsp/Hfp/A2Dp/Avrcp Profiles Support.
* Rohs Compliant.
* Small Outline. 16 X 15 X 2 Mm.
* Applications
* High Quality Stereo Wireless Headsets.
* High Quality Mono Headsets.
* Hands-Free Car Kits.
* Wireless Speakers.
* Voip Handsets.
* Maximum of 4dbm (class2) module with antenna
* Bluetooth standard version 2.0 + edr compliant
* Low current consumption
* Hold, sniff, park, deep, and sleep mode
* 3.0v or 1.8 operation
* Supports for up to seven slaves: sco links (3), acl links and piconet (7)
* Interface: usb, uart and pcm (for voice codec)
* Hci or spp, hsp/hfp, hid and dun firmware is available
* For 802.11 co-existence
* Rohs compliant
* Small outline
Applications:
Pda, nb, and car kit
Presenter, mouse, and keyboard
Cordless headset, digital camera and printer
Access points
Gps, pos, and barcode reader
Data collector
Domestic and industrial applications.
Bluetooth standard v2.1+edr.
Integrated switched-mode regulator.
Integrated battery charger.
Embedded kalimba dsp co-processor.
Integrated 16-bit stereo audio codec
95db snr for dac.
Enhanced audibility and noise cancellation.
Integrated with 8m bits flash memory.
Support host interface: usb or uart.
Support digital audio bus : pcm, i2s or spdif.
Hsp/hfp/a2dp/avrcp profiles support.
Rohs compliant.
Small outline. 21 x 16 x 2 mm.
Bluetooth ver. 2.0+edr certification
Transmit power up to +18dbm(class1)
Low current consumption:
Hold, sniff, park, deep sleep mode
3.0v to 3.6v operation
Full bluetooth data rate over uart and usb
Support up to 7 acl links and 3 sco links
Enhanced data rate(edr) compliant
For both 2mbps and 3mbps modulation modes
Interface: usb, uart&pcm( for voice codec)
Spp firmware with at commands
Rohs compliant
Small outline: 28.2 x 15.0 x 2.8 mm
Application:-
Access point
Domestics and industrial applications
Serial adapter
Gps, pos, barcode reader.
* Bluetooth standard Ver. 2.0 + EDR compliant.
* Low current consumption :
* Hold,Sniff,Park,Deep sleep Mode
* 3.0V or 1.8V operation
* Support for up to seven slaves :
* SCO links<3>,ACL links,Piconet<7>
* Interface: USB,UART&PCM(for voice CODEC)
* HCI or SPP,HSP/HFP,HID,DUN firmware is available
* Support for 802.11 Co-Exsitence
* RoHS compliant
* Small outline. 14 x 12 x 2.2 mm
Applications:-
* PDA,NB, Car Kit
* Presenter, Mouse, Keyboard
* for Cordless headset
* Digital camera & printer
* Access Points
* GPS,POS, Barcode Reader
* Data collector
* Domestic and industrial applications.
Fits almost any tractor, combine, sprayer, UTV etc.
Easy to Install
Easy to Use
2.5cm Accuracy
Straight AB lines
Curved AB lines
Implement control
Improve productivity
Eliminate waste through overlap etc.
Terrain compensation
Proven in the UK & worldwide
Field demonstration available near York.
In stock for next day delivery throughout the UK
UK's No1 for service and support.
We can supply your own base station at equally low cost - avoid subscription fees
Introduction:
Support bluetooth v4.0 low energy (ble 4.0) wireless standards.
Support slave and master mode operation.
Super low energy mode: 13.6ma rx current at 3v, 13.3ma tx current @0dbm at 3v.
Support multiple network protocols.
Support smart configure for network.
Support program’s remote upgrading.
Optional antenna: internal or external.
Support uart, pwm, gpio, ad and other interfaces.
Micro sizes: 12mm x 20mm x 3.5mm, smt.
Power supply: battery or 3.3v single supply.
Fcc certification.
Comply with rohs standard.
Access cloud platform for free.
Application:
Handheld devices
Personal medical
Internet of things
Wireless sensor & industrial control
Light control
