TC20 series slip ring is a micro slip ring, of which there is a 20 mm through-bore in the center of the shaft. It has the advantages of capsule & through bores slip ring. This design features long life & low cost, and fiber Precious metal brush contact technology realizes ultimate performance in many challenging applications. With aluminum alloy body, double precision roller bearings provide smoother running, lower torque and lower electrical noise. It is suitable for transferring signal & low power.
A)Feature:
20mm through-bore, provid 1~12 ways
Compact miniature design, small size,fit for harsh space;
Multi circuits/channels design can delivr both power & signal at the same time;
Hybrid FORJ or High Frequency rotary joints;
Aluminium alloy shaft and body for excellent shielding;
No need to maintain.
B)Specification:
Speed: 300 RPM
Voltage: 240 VAC/DC
Working Temp: -30
Current: 2A/way
Dielectric Strength: 600 V DC @ 50Hz
Insulation Resistance: >=500 M¦¸ @ 600 V AC
Electrical Nosie: less than 60 m¦¸
Body material: Aluminium alloy
More product information welcome to visit slipring.net.
TC20 series slip ring is a micro slip ring, of which there is a 20 mm through-bore in the center of the shaft. It has the advantages of capsule & through bores slip ring. This design features long life & low cost, and fiber Precious metal brush contact technology realizes ultimate performance in many challenging applications. With aluminum alloy body, double precision roller bearings provide smoother running, lower torque and lower electrical noise. It is suitable for transferring signal & low power.(More product information welcome to visit slipring.net.)
Feature:
20mm through-bore, provid 1~12 ways;
Compact miniature design, small size,fit for harsh space;
Multi circuits/channels design can delivr both power & signal at the same time;
Hybrid FORJ or High Frequency rotary joints;
Aluminium alloy shaft and body for excellent shielding;
Function desc:
Use on any rotating object to transfer tiny voltage , HF signal, EMF, thermocouple, computer signals, strain gauge, current, Inter Bus, Can-Bus, Profibus, RS422, RS485, PLC, digital/analog video, digital audio , Gigabit Ethernet, sensor signal and so on.
Specifications:
Electrical data: items value
Power signal
Voltage: 380vAC/DC or higher240vAC/DC
Wire specifications: UL Teflon Teflon
Insulation resistance: 1000M @ 500VDC500m@ 500vdc
Current rating: 10A per circuit or signal
Dielectric strength: 1000V@50HZ
Electric noise: 100M@6VDC,50ma,5rpm/min
Mechanical data
Circuits1--48
Operating speed: 600rpm
Working temperature: -40~ +80
Working humidity: 65%rh or higher
Wire length: 200mm
Housing material: aluminum alloy
Torque: 10g.m
Protection: IP51 or Higher.
Optical rotary connector slipring
Main parameter
Path number: per customer request
Working wavelength: 650nm~1550nm or others
Working Temperature: -40°C~+60°C
Working speed: 0~100rpm or higher
Insertion loss: differents depends on path number and fiber types
Echo loss: >50dB
Dynamic loss:
-
522 Mini Through Holes Slip Ring Vsr Tc20 12 Suppliers
Short on time? Let Mini Through Holes Slip Ring Vsr Tc20 12 sellers contact you.
With the increasing degree of factory automation, more and more mobile devices need to be powered or control signals transmitted. Although cable reels are easily overlooked, they are an efficient and stable mobile power supply solution.
The driving mode of cable reel is divided into spring drive and motor drive. Use these two drive forms to retract the cables needed for mobile devices. When the device moves in the opposite direction, the reel spools. The retractable cable is the basic operation of the reel and is the key to the safety and efficiency of mobile devices.
The use of cable reels can well accommodate the cables of mobile devices, avoiding the presence of exposed cables on the factory floor, thereby reducing personnel hazards. At the same time, the work efficiency is improved, the wear of the cable is greatly reduced, and the maintenance cost is reduced.
The electric cable reel not only includes the winding body and the drive mechanism, but also includes a slip ring box. The slip ring box is equipped with a slip ring and a brush assembly installed according to the requirements of the cable. Its role is to transfer the electrical energy from the power supply point to the cable reel cable. The slip ring and the brush complete the process. This is a kind of effective transmission of electrical energy. However, brushes are consumables that need to be inspected regularly and replaced in time after wear.
Victory-way Electronic(Shenzhen) Co., Ltd. is a professional manufacturer of conductive slip rings. The product design, production, and inspection process of cable reel slip rings are mature and advanced. Product quality is high quality and reliable. Our slip ring has been sold to more than 100 countries around the world and has won unanimous praise from customers.
To ensure that the cable line is always smooth, the slip ring is indispensable. According to different installation methods of the conductive slip ring, it is divided into three types of structures: slip ring internal type, slip ring external type, and cantilever type. Among them, the internal type slip ring has a compact internal structure and beautiful appearance; the external type slip ring is easy to repair; the cantilever slip ring is suitable for winding longer and heavier cables.
We select high-quality raw material suppliers; use advanced precious metal fiber brush technology to ensure the stable and reliable transmission of current and signal data; through scientific calculations, the pressure between the fiber brush and the ring road is optimized, making the slip ring Maximize the service life; every slip ring manufactured has undergone rigorous testing and provides comprehensive after-sales service.
It has a beautiful natural honey golden hue, but more importantly it is famous for being highly resistant to rot, pests (bugs, termites and worms), and fungi in both land and marine environments. Teak is the premier choice for any requirement in the marine industry, from decks and interior work, to docks.
Teak is naturally water-resistant and physically very strong and durable. It is not prone to significant expansion or contraction with humidity changes. The oils in teak are what make it weather-resistant and it requires basically no care when left outside. Its high silica content gives it non-skid properties as well as durability. This makes teak a great choice in damp environments, or in areas where slipping could be very dangerous.
Application: Ship and boatbuilding, veneer, furniture, exterior construction, carving, turnings, and other small wood objects.
Below are the popular sizes we are offering:
Teak Round Logs
Teak round logs are a premium choice for those in the market for lumber and timber products. The round logs are the result of a peeling process that removes the bark and exposes the wood's natural grain.
Teak Square Logs
Teak square logs are created through a process that involves cutting the round logs into square pieces, exposing the natural grain of the wood. This process results in a beautiful and smooth surface that is ready for further processing.
Teak Cut to Size Timber
Teak Cut to size timber has been precisely cut to the desired dimensions and specifications of a customer. The benefit of cut to size timber is that it eliminates the need for the customer to do any additional cutting or shaping, saving time and effort.
Origin: Burma, Ecuador, India, Panama, Costa Rica, Nigeria, Ghana, Brazil, etc.
Item Specification
Tree Size: 100-130 ft (30-40 m) tall, 3-5 ft (1-1.5 m) trunk diameter
Average Dried Weight: 40.9 lbs/ft3 (655 kg/m3)
Specific Gravity (Basic, 12% MC): 0.55, 0.66
Janka Hardness: 1,070 lbf (4,740 N)
Modulus of Rupture: 14,080 lbf/in2 (97.1 MPa)
Elastic Modulus: 1,781,000 lbf/in2 (12.28 GPa)
Crushing Strength: 7,940 lbf/in2 (54.8 MPa)
Shrinkage: Radial: 2.6%, Tangential: 5.3%, Volumetric: 7.2%, T/R Ratio: 2
Tc series slip ring is a micro slip ring, of which there is a 7, or 15, or 20 mm through-bore in the center of the shaft. It has the advantages of capsule & through bores slip ring. This design features long life & low cost, and fiber precious metal brush contact technology realizes ultimate performance in many challenging applications. With aluminum alloy body, double precision roller bearings provide smoother running, lower torque and lower electrical noise. It is suitable for transferring signal & low power.
A)feature:
7mm through-bore, provid 1 12 ways
Compact miniature design, small size fit for harsh space;
Multi circuits / channels design can deliver both power & signal at the same time;
Hybrid forj or high frequency rotary joint;
Aluminium alloy shaft and body for excellent shielding;
No need to maintain.
B)specification:
Speed:300 rpm
Voltage: 240 vac/dc
Working temp: -30
Current: 2a/way
Dielectric strength: 600 v dc @ 50hz
Insulation resistance: >=500 m ; @ 600 v ac
Electrical nosie :less than 60 m
Body material :aluminium alloy
More product information welcome to visit slipring.Net.
SAFETY FEATURES
Abrasion Resistant
Acid Resistant
Anti Static Insole
Excellent Shock Absorber
Fine Leather
Light Weight
Slip Resistant Sole
Steel Toe Cap
ADDITIONAL PRODUCT INFO
OVERVIEW
Product Name : Safety Shoe
Standard : S1
Sizes : 39 - 46 (5-12)
Colors : Black
AVAILABLE OPTIONS
Product Number: 2058-06
Standard : S1, S1P, S2, S3
Toe : Steel
Midsole : Steel
Sole : Mono
Color : Black / Brown
MATERIALS
Upper : Water Repellant Buff Waxy
Lining : Soft Buff Leather
Toe : Steel
Footbed / Socks: Padded Antistatic
Sole : 2058 Mono Density PU
Certified : EN ISO 20345:2011
BOOT CARE
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.
* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.
* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.
* The shoe should be used for the purpose for which it has been designed.
Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.
* The body temperature is regulated through your feet
* Maximum number of nerves go through your feet.
100% COMFORT GUARANTEED
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.
* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.
* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.
* Cushioned Insoles providing better comfort.
* Shock absorbing PU midsole with low density providing uniform cushioning and co
SAFETY FEATURES
Abrasion Resistant
Acid Resistant
Anti Static Insole
Excellent Shock Absorber
Fine Leather
Light Weight
Oil Resistant
Slip Resistant Sole
Steel Toe Cap
Water Proof
ADDITIONAL PRODUCT INFO
OVERVIEW
Product Name : Safety Shoe
Standard : S2
Sizes : 39 - 46 (5-12)
Colors : Black
AVAILABLE OPTIONS
Product Number : 2058-11
Standard : S1, S1P, S2, S3
Toe : Steel
Midsole : Steel
Sole : Mono
Color : Black / Brown
MATERIALS
Upper : Water Resistant Smooth Haircell
Lining : Soft Buff Leather
Toe : Steel
Midsole : Steel
Footbed / Socks : Cambrella and EVA. Antistatic
Sole : 2058 Mono Density PU
Certified : EN ISO 20345:2011
BOOT CARE
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.
* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.
* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.
* The shoe should be used for the purpose for which it has been designed.
Some facts about feet
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.
* The body temperature is regulated through your feet
* Maximum number of nerves go through your feet.
100% COMFORT GUARANTEED
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.
* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.
* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.
* Cushioned Insoles providing better comfort.
* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.
* Light Weight PU for a featherlite feel even during high stress working conditions.
SAFETY FEATURES
Abrasion Resistant
Acid Resistant
Anti Static Insole
Excellent Shock Absorber
Fine Leather
Light Weight
Slip Resistant Sole
Steel Toe Cap
ADDITIONAL PRODUCT INFO
OVERVIEW
Product Name : Safety Boot
Standard : S1
Sizes : 39 - 46 (5-12)
Colors : Black
AVAILABLE OPTIONS
Product Number : 2058-15
Standard : S1, S1P, S2, S3
Toe : Steel
Midsole : Steel
Sole : Mono
Color : Black / Brown
MATERIALS
Upper : Water Reppellant printed Leather
Toe : Steel
Footbed / Socks : Cambrella and EVA. Antistatic
Sole : 2058 Mono Density PU
CERTIFIED: EN ISO 20345:2011
BOOT CARE
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.
* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.
* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.
* The shoe should be used for the purpose for which it has been designed.
Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.
* The body temperature is regulated through your feet
* Maximum number of nerves go through your feet.
100% COMFORT GUARANTEED
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.
* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.
* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.
* Cushioned Insoles providing better comfort.
* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.
* Light Weight PU for a featherlite feel even during high stress working conditions.
SAFETY FEATURES
Abrasion Resistant
Acid Resistant
Anti Static Insole
Excellent Shock Absorber
Fine Leather
Light Weight
Slip Resistant Sole
Steel Toe Cap
ADDITIONAL PRODUCT INFO
OVERVIEW
Product Name : Safety Shoe
Standard : S1
Sizes : 39-46 (5-12)
Colors : Tan
AVAILABLE OPTIONS
Product Number: 2058-58
STANDARD: S1, S1P, S2, S3
Toe: Steel
MIDSOLE: Steel
Sole: Mono
COLOR: Black / Brown
MATERIALS
UPPER: Water Repellant Nubuck & Cow Leather
Footbed / Socks : Moulded Cambrella and EVA. Antistatic
Sole : 2058 Mono Density PU
Certified : EN ISO 20345:2011
BOOT CARE
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.
* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.
* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.
* The shoe should be used for the purpose for which it has been designed.
Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.
* The body temperature is regulated through your feet
* Maximum number of nerves go through your feet.
100% COMFORT GUARANTEED
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.
* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.
* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.
* Cushioned Insoles providing better comfort.
* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.
* Light Weight PU for a featherlite feel even during high stress working conditions.
Make use of advanced sheaf brush technology to design and manufacture
Suffice 360ípunrestrained continuous rotation to transmitting power and/or data
Product modularize
Long life and maintenance-free operation
Pneumatic/hydraulic rotary connector slipring
Main parameter
Path number: per customer request
Working pressure: 0~1MPa or higher
Working media: Compressed air, Condensate water etc.
Working Temperature: -20°C~+60°C
Working speed: 0~50rpm or higher
Installation method: per customer request, or site design
Changeable parameter
Sealing element: material use China made or import
Structural material: carbon steel, aluminium alloy, stainless steel etc.
Connection mode: fast inserting, thread, flanged
Flow aperture: per customer request
Connection mode and specification: per customer request
1. Mastering the key technique of design and manufacture, holding independence the intellectual property
2. Suffice the un-limit revolving video and the digital signals transmission of 360 degrees completely
3. The integrated produce standard may meet the demand of client
4. Longstanding using life
5. Can be customised for customer need the produce
Minimize designú¼Being fit for the Tlimit space Tfix
Rotary softú¼handle portable
Standardization product specification
Use long life rotary potentiometers
The ratio of capability and price is high
G series slip rings fit for high speed application. High speed slip rings need optimized material, special structure and process.
There are 2 kinds of slip rings in G series: GC and GT, GC series fit to fix at the end of shaft, and GT series have a through hole in the center of slip ring, fit to setup on the shaft.
Plug straightly slip ring is also known as connect directly slip ring or plug-in slip ring.It is also called thermocouple slip ring or thermal resistance slip ring according to practical use.
The H series slip rings are compact, cost effective, mercury free, designed for industrial manufacturing.Standard H3 has three rings, each is able to carry 7 amps. H series slip rings overcome mercury slip ring's disadvantages of not environmental protection and use on environment-demanding. Advanced technology and reliable structure, maximum utilization of contact materials realize the highest performance but low cost.Standard terminals fit to quickly install.
This product is fully compatible with Moog P4 slip ring and can also replace mercury slip ring M330,A3H, etc.
They are best applicable in the food production industry and packaging industry.
A.)Outline:
B.)Specification:
Voltage: 240V AC/DC
Current Rating:7A/Ring
Speed:400PRM
Insulation Resistance:200M@500VDC
Dielectric Strength:AC 600V@60Hz, 60S
Electrical Noise:10 milliohms MAX @5rpm,50milliamps,DC
Contact Material:Precious metal
Operate Temp: -20+80
Storage Temp:-30+85
C.)Feature:
Mercury free;
Reliable & rotational connections for power, signal and data transmission;
Speeds up to 400rpm;
Fast mounting.
D.)Application:
Rotary tables and rotary sensors;
Robots;
Test equipment;
Exhibit / display equipment;
Heated rollers;
Food manufacturing machine;
Automation equipment;
Packaging machine.
E.)Option:
Higher voltage and current;
Higher speed;
Wider range of temperature;
Higher protection class;
Layout & size of terminals can be customized;
Flange for installation.
PCB slip ring is low-cost,easy to install,usually separate structure,adapted to work less time or intermittent operation of the environment.
There are 2 parts for this kind of slip ring - surface of the ring and the brush assembly. Thick copper layer PCB is used for surface of the ring,and then the plating process of copper and hard gold,so the PCB slip ring has a high hardness and good wear resistance. The brush assembly is composed of military grade alloys brush block and heat-treated beryllium copper shrapnel,so it has the characteristics of low contact resistance, self-lubricating, Less friction dust.
This kind of slip ring is simple structure, less process, short delivery, batch fast, and easy customization.
We have many kinds of this product type. Please contact our technical staff for more information.
Explosion-proof slip ring have more safety and more high reliability, it was designed for explosive condition. Fit for oil platform, explosive material packing, agro-product processing, coal mine and spray finishing, etc.
Slip rings passing the electricity by rub between the brush and rings, so it is no possible to prevent the spark in theory, Normal slip rings only pay attention on its electric property,but less in protection. So it is very danger to use normal slip rings in explosive condition.
Victory-way know the disadvantage of explosion deeply, and we know the philosophy of the explosion, and its protective measures. We designed the Explosion-proof slip ring according to our high reliability slip rings design experience. This slip ring fit for both Explosive Gas atmospheres and Explosive Dust atmospheres, Protect class: IP66.
The slip rings passed EX test and got the certificate of conformity fromCNEX (Nanyang),the Cer. No. : CNEx12.2698X. Marking: EX d IIC T6 Gb,DIP A21 Ta,T6
Feature
EXd mark, fit for IIC,IIB & IIA;
Safest Temp range, reached T6 class, fit for T1~T6 working condition;
Working condition: -30,60 ;
Protect class IP66, IP68 for option;
Can be used in explosive gas and or explosive dust atmospheres (Zone 1 or Zone 2, Zone 21, Zone 22);
EPL Class :Gb;
Explosion marking: Ex d IIC T6 Gb, DIP A21 TA,T6 (equate to Ex tb IIIC,T6);
Stainless steel body have good environmental suitability;
Weak signal is viable;
Power & Signal can be combined in one body;
Without any maintain.
Typical Application
Oil platform;
Explosion-proof packing machine;
Spraying equipment;
Chemical equipment;
Farming industry;
Fit for explosive Gas and or Explosive Dust atmospheres;
Option:
Higher voltage and current capacity
Higher speed
Wider range of temperature
Higher protection class
Style of lead exits
Flange for install
522 Mini Through Holes Slip Ring Vsr Tc20 12 Suppliers
Short on time? Let Mini Through Holes Slip Ring Vsr Tc20 12 sellers contact you.
