Explosion-Proof Slip Ring

G series slip rings fit for high speed application. High speed slip rings need optimized material, special structure and process.
There are 2 kinds of slip rings in G series: GC and GT, GC series fit to fix at the end of shaft, and GT series have a through hole in the center of slip ring, fit to setup on the shaft.

PCB slip ring is low-cost,easy to install,usually separate structure,adapted to work less time or intermittent operation of the environment.


There are 2 parts for this kind of slip ring - surface of the ring and the brush assembly. Thick copper layer PCB is used for surface of the ring,and then the plating process of copper and hard gold,so the PCB slip ring has a high hardness and good wear resistance. The brush assembly is composed of military grade alloys brush block and heat-treated beryllium copper shrapnel,so it has the characteristics of low contact resistance, self-lubricating, Less friction dust.


This kind of slip ring is simple structure, less process, short delivery, batch fast, and easy customization.
We have many kinds of this product type. Please contact our technical staff for more information.

When you have a height restriction, a "pancake" ring - also called a "flat" or "platter" ring - could be the best solution. These slip ring units are based on a disc shaped rotor embedded with concentric grooves carrying the signal and power channels with a brush block assembly mounted over the top to act as the stator.We can build custom versions of this type of ring with anywhere from 4 to 100 channels to include the required center bore size.Contacts are available in precious metal,operating speed has a large bearing on the number of channels and overall.

A.)Feature

Ultra-thin design,the thickness reached 15 mm min

Center bore size can be option

Multiple circuit confgurations for power & data signals.

Without any maintain.

B.)Specification

Voltage 240V AC/DC
Current Rating 10A/Ring
Insulation Resistance 1000M@500VDC
Dielectric Strength AC 600V@60Hz, 60S
Electrical Nosie 70 milliohms MAX @5rpm,50milliamps,6V DC
Contact Material Precious metal
Lead Size/Type 1.0mm2Teflon wire
Operate Temp -20 +80
C.)Application

Rotary index tables, test equipment;

Robotics,process equipment and rotary sensors;

Medical equipment;

Radar System.

D.)Option

Higher voltage and current

Wider range of temperature

Higher protection class

Style of lead exits

Flange for install

HS-FA2X1/2-S24-SF hybrid slip ring is designed to setup at the end of shaft or side of the machine, fit to pass fluid +signal or low current power. It is set in the body of rotary joint, the wire of rotor will lead out from the center. Stator side has flanges for setup.(More product information welcome to visit slipring.net.)

Feature:
1) High quality bearing on both sides of shaft for smoothly operating;
2) No need to maintain;
3) High quality sealing materials for long life circle;
4) Special shaft provides an excellent wear resistance;
5) Al, Bass, stainless steel body for option;
6) Specially designed leak detection holes;
7) Stator side has flanges for setup.
Technical spec:
Speed
200Rpm
Operate temperature
-30,90
protect degree
IP65
Housing
Al alloy

Part A:(Electornic Slip Rings)
Channels

12 rings(for signal)

Operation Voltage

0~240VAC/DC

Current

2A/Ring

Contact material

Precious Metal

Electric Noise

Max.40m©

Dielectric strength

500VAC@50Hz,60s

Insulation resistance

500MΩ @600VDC

Part B:(Rotary Joint)
Channels
2 Ways
Pressure
1.6Mpa Max
Media
compressed air/ vacuum



Our products are widely used in: Security, Factory Automation, Electric Instrumentation, Medical, Aerospace, Marine,Civil and Military Fields.Such as: Crane, Giant Wheel, Cotton Picker, Medical Equipment, Detector,Rotary Tables,Robots,Strander, Webcam, Automatic Revolving Door,Exhibit / Display Equipment, Food Manufacturing Machine,Packaging Machine,Amusement Equipment, Irrigation Machine,Heated Rollers etc.

High current slip ring was designed for welding machine, planting line, electric generating set, and high current charging set. this kind of slip rings usually using carbon alloy, copper alloy or silver alloy as contact material. High current working condition need reliable contact and good radiating.
Victory-way select the best fit contact material according to customers work condition. Constant pressure set and running-in contact surface lead good contact. Low resistance and optimized radiating structure to make sure the slip rings can used for long time stability.

Type Code

Most of high current slip ring was designed for customer, so there havent standard product, below sheet is some typical high current slip ring for reference, If you have same require, please contact us ,and we will select the best fit product for you.

No
Model
Inner size
Current (A)
Voltage(V)
Speed(Rpm)
Ways
Contact material
Type
1
DTS-38X3P120
38
120
380V
3000
3
Sliver
Separated
2
DT-65X3P360
65
360
380
120
3
Copper
integral
Feature

High current;

Wide Temp range:-60,260;

Without any maintain;

Easy to setup;

Typical Application

Rotary index tables, test equipment;

Plating line.

High-power system

Cable reels.

Option

Higher voltage and current capacity

Higher speed

Wider range of temperature

Higher protection class

Style of lead exits

Flange for install

Our products are widely used in: Security, Factory Automation, Electric Instrumentation, Medical, Aerospace, Marine,Civil and Military Fields.Such as: Crane, Giant Wheel, Cotton Picker, Medical Equipment, Detector,Rotary Tables,Robots,Strander, Webcam, Automatic Revolving Door,Exhibit / Display Equipment, Food Manufacturing Machine,Packaging Machine,Amusement Equipment, Irrigation Machine,Heated Rollers etc.

Hybrid slip ring is designed for setup at the end of shaft or side of the machine,fit for passing fluid + signal or low current power.The slip ring is set in the body of rotary joint, and the wires of rotor lead out from the center. Rotor side has flanges for setup.(More product information welcome to visit slipring.net.)

Feature:

1) High quality bearing on both sides of shaft for smoothly operating;
2) High quality sealing materials for long life circle;
3) Special finished shaft provides a excellent wear resistance;
4) Al, Bass, stainless steel body for option;
5) Specially designed leak detection holes;
6) No need to maintain.

Technical spec:
Speed
100Rpm
Operate temperature
-30,90
protect degree
IP54
Housing
Al alloy

Part A:(Electornic Slip Rings)
Channels
12 rings(for signal)
Operation Voltage
0~240VAC/DC
Current
2A/Ring
Contact material
Precious Metal
Electric Nosice
Max.40m Ω
Dielectric strength
500VAC@50Hz,60s
Insulation resistance
500MΩ @600VDC
Part B:(Rotary Joint)
Channels
2 Ways
Pressure
1.6Mpa Max
Media
compressed air/ vacuum


Our products are widely used in: Security, Factory Automation, Electric Instrumentation, Medical, Aerospace, Marine,Civil and Military Fields.Such as: Crane, Giant Wheel, Cotton Picker, Medical Equipment, Detector,Rotary Tables,Robots,Strander, Webcam, Automatic Revolving Door,Exhibit / Display Equipment, Food Manufacturing Machine,Packaging Machine,Amusement Equipment, Irrigation Machine,Heated Rollers etc.

In order to provide accurate oceanographic data for marine development and oceanographic research, Victory-way Electronic(Shenzhen) Co., Ltd. has designed waterproof slip rings and conductive slip rings for water cable reels. The underwater motor drives the winding drum to move the marine instrument up and down in the water, and the data can be measured.

The bottom-sea ocean profile measuring device is submerged on the sea floor, and the underwater drive transmission system is controlled by the multi-core cable connected coast station. The underwater motor drives the speed reducer to drive the rotation of the drum. The tether wound on the drum passes through the fixed pulley. The marine instrument is placed so that the marine instrument moves up and down in the sea water, and a plurality of sensors provided on the instrument measure the vertical profile of the marine data.

The bottom-sea type ocean profile measuring device is composed of a frame structure, an underwater drive transmission system installed in the frame structure, and a marine instrument moored on the drive transmission system cable. The frame structure includes a protective frame, a structural frame, and a cement base. The protective frame is fixed on the cement base and the structural frame is arranged in the protective frame. The underwater drive transmission system is fixed on the structural frame, including underwater motors, speed reducers, rollers, fixed pulleys and mooring lines. The underwater motor is connected with the rotating shaft of the drum through a speed reducer, and the drum is wound with a mooring cable, and the mooring rope bypasses the fixed pulley to connect the marine instrument located outside the protective frame. The mooring cable is a multi-core cable with one end connected to a marine instrument and the other end connected to a floating coast station.

Victory-way Electronic(Shenzhen) Co., Ltd. conductive slip ring consists of elastic materials - brushes, sliding contact surface materials - conductive rings, insulating materials, adhesive materials, composite brackets, precision bearings, dust covers and other auxiliary parts. The brush is made of metal alloy material. It is symmetrically double-contacted with the conductive ring ring groove in the shape of . The signal and current are transmitted by the elastic pressure of the brush and the conductive ring ring groove. Victory-way Electronic(Shenzhen) Co., Ltd. 's waterproof slip ring, conductive slip ring for marine vessels, uses a cable that connects a marine instrument and an underwater drive transmission system in a sea-bottom cross-section measuring device, and is wound on a roller, and is connected to a marine instrument through rotation and retraction of the roller. The cable to achieve the up and down movement of marine instrument.

We offer you electrically-powered revolving stage slip ring, which are ideally suitable for use in revolving stage.They easily help you to solve the problem of wire and cable wrapping,reliably and stably transmit current.
We Victory-way Electronic(Shenzhen) Co., Ltd. is a high-technology company which focuses on R&D and production of various kinds of industrial electrical slip ring, created by senior engineers with many years of conductive slip ring application and development experience.We can learn the demands of customers better and provide the best solution in the shortest time to help customers shorten development time.

At present, our products are applied in the fields of security,Electric Instrumentation, industrial automation, military, environmental protection,Medical, Aerospace, Marine,smart toys,playground equipment and so on.
Excellent performance and reliable quality make our conductive slip ring exported to developed industrial countries, such as Japan, USA, Europe etc. Our products are very popular with customers and we are honored to be privileged the only supplier of slip ring for some customers of the high reliability requirement.

Robots and robotic arms are machines that automatically perform work. Robots can replace or assist humans in all kinds of work. Any boring, dangerous, toxic, and harmful work can be shown by robots. With the development needs, robots and robotic arms are widely used in manufacturing and automation. Robots are indispensable automation equipment in the field of advanced manufacturing technology.

The robot slip ring provides power and signals for the complex movement of robots and robotic arms, improves mechanical performance, simplifies system operation, and prevents sprains in the wire during rotation.

Victory-way Electronic(Shenzhen) Co., Ltd. can design and produce various robots and mechanical arm slip rings according to your requirements. The robot arm slip ring transmits various current, control and sensor signals.



Robot slip ring, mechanical arm slip ring features:

1 Long life, high protection, slip ring maintenance free;

2 Compact structure & appearance, light weight, easy to install;

3 Smooth operation, low torque, very low electrical noise, low resistance, no friction;

4 Multi-contact, multi-channel, multi-signal transmission;

5 High speed, high voltage, high protection level, high speed data transmission, high precision.

Typical applications: industrial robots, robotic arms, underwater robots, etc.



Electronic robots and mechanical arm conductive slip rings of Victory-way Electronic(Shenzhen) Co., Ltd. have long service life and low price. According to years of experience in designing and producing slip rings, power, control signals and high-frequency data can be combined in one device to simplify the structure and solve the problem of wire winding. .