High-performance Polycarboxylic Acid Superplasticizer is widely used in Concrete engineering. It can not only greatly reduce the amount of cement and water, but also significantly improve the workability of concrete, improve the quality of the project, reduce the cost of the project, save energy consumption, and have no pollution to the environment.
FEATURES AND BENEFITS
Improve the compressive strength of concrete (production of concrete with strength over 50N/mm²)
Allows reduction of mixing water (up to 35%) without reducing the consistency of the concrete mixture.
Reduced cement consumption, thereby reducing costs (while maintaining a constant water-cement ratio) Does not cause steel corrosion (low chloride content)
RECOMMENDED FOR
Pumped concrete
High flowability concrete
High durable concrete
High strength concrete Ready-mixed concrete
 Long distance transport concrete
Dosage of JLY-01 should be decided according to the mix design, surrounding, the required water reducing rate and materials.Normal
dosage is 0.7% weight of cement with a range of 0.25%-0.8%. Trial mixes should be made to determine the optimum dosage.
JLY-03 Series Early strength type is an eco-friendly new generation high performance polycarboxylate superplasticizer. It is based on the reaction between the molecule of polycarboxylate superplasticizer and cement, designing special structure molecule of polycarboxylate, to promote combination of granules of cements with hydrone, to finish hydrating and enhance the initial strength.
FEATURES AND BENEFITS
 Enhance high strength : It has higher early strength growth ratio, can reduce shrinkage performance and the carbonation rate of concrete.
 High water reduction: Water reducing ratio can attain at least 25% at saturated dosage, which assures improving the workability of concrete, enhancing the concrete strength and saving cement application amount. Increase slump retention: No retempering, It can well delay the transport and on-site retention time of the concrete, assure the pumping performance of the concrete.
Good cohesion: Ease of pumping, No delamination,No segregation or bleeding.
 High flowability: Ease of placing and compaction. No segregation.
RECOMMENDED FOR
Pumped concrete
Precast concrete
Early strength concrete
High flowability concrete
 High early strength concrete
Long distance transport concrete
JLY-03 water reducing type series is available in 1000kgs, 200kgs,
25kgs drums or bulk delivery.
STEMOL PW-35 (PCE POWDER)
The product was powdered polycarboxylate superplasticizer with high performance of water-reducing and slump retention It has the benefits as follow:
1. High water reducing rate could achieve 25% above, under the conditions of mixing the concrete with the same ratio of the water, the product could improve fluidity greatly.
2. Liquid polycarboxylate superplasticizer is available by diluting the product with just water.
3. The index of performance for this product is the same with the index of pumping agent.
4. It is convenient during use & can meet the requirement of building plants in remote area by mixing the product with water.
5. The product has the features of uniforms particles, lower moisture content, excellent solubility, high range water reducing, high slump retention and so on.
TECHNICAL PARAMETER
ITEMS INDEX
APPEARANCE WHITE TO YELLOW POWDER
WATER REDUCING RATE % >25
SLUMP RETENTION 2 HR MM <120
BULK DENSITY >450
PH VALUE 7.0 - 9.0
MOISTURE <5
AIR <2.7
ALKALI <5
CHLORIDE <0.6
FINENESS, 50 MESH < 15%
MAIN PERFORMANCE:-
1. High water reducing rate: It could achieve 25% above, under the conditions of mixing the concrete with the same ratio of the water, the product could improve fluidity greatly.
2. High slump retention performance: Normally carboxylic groups is damaged of ordinary polycarboxylate superplasticizer by the high temperature during dry spray process, this product takes the special process so protect the carboxylic groups and achieve the excellent slump retention ability.
3. Excellent solubility and fast solvability: Due to uniform particles, the specific area is larger, so the product is dissolved quickly in the water then no impurity after dissolving
DOSAGE
0.2~0.3% of the aggregate material, it is instead of liquid polycarboxylate superplasticizer after dissolving the dosage after dissolving reference to the actual solid content of dissolving liquid.
Polycarboxylate superplasticizer products have been extensively used in cement or gypsum-based mortars with high fluidity and high strength requirements. It is widely used in fluid mortars, such as fluid mortar for pouring, paving, and painting.
For price, specifications and more details please contact us
Model NO.: FOX 8HP
Appearance: Powder
Color: Light Yellow
Efficacy: Water Reducing
Type: Dispersant
Classification: Chemical Additives
Quality: High Quality
Price: Competitive Price
Export Markets: Global
Product Description
1. Description:
FOX® -8H (liquid) and 8HP (powder) is a high performance 100% poly-carboxylate based polymer, specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials. 8H (8HP) is a neutral concentrate grade; It is mainly used as a raw material to produce different types of high performance water reducers for targeted industrials.
2. Special Features:
8H (8HP) performs water-reducing effect, categorized as ASTM Type A admixture with superior benefits from the technology and the quality:
-Very effective dispersing power, largely reduces required dosage
-Good stability, producing extended slump life
-Homogeneous plasticizing property with a unique cohesive characteristic, thus preventing segregation and bleeding
-Promotes usage of higher dosage or volume of cementitious supplementary materials such as silica fume, fly ash and blast furnace slag.
-Versatile disperser for various types of cement and minerals including gypsum, ceramic, ion-oxide pigment.
3. Uses
8H (8HP) is mainly used as a major ingredient to produce a high performance water reducers or plasticizers for the following applications
-High performance concrete
-Precasting
-Self-compacting concrete
-Pumpable or flowable concrete
-Concrete containing silica fume, fly ash or Blast furnace slag
-Specially shaped concrete elements
-Architectural concrete
-Lightweight concrete
8H (8HP) can also be used as-is for above-mentioned applications. However, due to variations in chemical composites of cements and other materials used and for different application requirements, it is not suggested to use 8H (8HP) directly in concrete or other materials without evaluation. The optimal performance of 8H (8HP) in applications should be obtained through trial mixes and/or through formulation adjustments by the users. For precast products processed in elevated temperate such as steam curing, use Simon 600. For technical support, please contact FuClear technologies Inc.
4. Special notes
Do not use 8H (8HP) with additives containing naphthalene sulfonate. Unreliable rheologic behaviours may be experienced. Do not use 8H (8HP) for temperature treated concrete or other materials. Use Simon 600.
5. Packaging
Available in 200 kg (180 L/ 48 gal) drum and 1000 kg (893L/ 236gal) tank for 8H (liquid), and 25kg plastic bag for 8HP (powder form)
6. Storage
8H should be stored at temperature 5- 40C (40-104 F). When It freezes, full strength can be restored AFTER COMPLETE THAWING AND THOROUGH AGITATION. Keep container closed when it is not in use. Do not store the product directly under sunlight.
7. Shelf life
The shelf life is twelve (12) months when it is packed with a new drum or tote tank.
8. Handling
8H (8HP) shows negligible toxic, hazardous, and corrosive. Comprehensive instructions are given in the Material Safety Data Sheet available from Fuclear sales offices.
Product Description
This product is a water-soluble concrete admixture, major part of which is polycarboxylate polymer. It provides functions of high range water reduction, excellent slump retention, low shrinkage and high strength. It can be added to different strength grade concrete, especially for the concrete of high strength, self-compacting, high durability and performance. This product accords with GB8076-2008, JG/T233 first-class standards, and also satisfies the No. [2005]101 Specification of National Ministry of Railways.
Benefits
High range water reduction: 25~40%
Set retarding function
High slump retention and guaranteed slump range, small rate of slump loss
The significant enhancement eff¬ect to concrete hardening
Well workability, no segregation, no bleeding and high pumpability
No chlorine, low alkalis
Air content can be adjusted by project requirements
Significant improvement in preventing freezing, segregation, carbonization and shrinkage, the life time of concrete is extended greatly
Fields of Application
All grades of pumping concrete and economical concrete for long-distance transport
High strength concrete, owing concrete, self-compacting concrete, mass concrete, high performance concrete and clear water concrete structures
All sorts of industrial and civil building projects, high-compressive-strength concrete structures, especially in large scale concrete structures, which require the high durability of concrete
Produce large-scale prestressed concrete beam or board, and steam curing concrete etc.
Product Description
This product is a water-soluble concrete admixture, major part of which is polycarboxylate polymer.
It provides functions of high range water reduction, excellent slump retention, low shrinkage and high strength. It can be added to different strength grade concrete, especially for the concrete of high strength, self-compacting, high durability and performance. This product accords with GB8076-2008, JG/T233 first-class standards, and also satisfies the No. [2005]101 Specification of National Ministry of Railways.
Benefits
High range water reduction: 25~40%
High slump retention and guaranteed slump range, small rate of slump loss
The significant enhancement eff¬ect to concrete hardening
Well workability, no segregation, no bleeding and high pumpability
No chlorine, low alkalis
Air content can be adjusted by project requirements
Significant improvement in preventing freezing, segregation, carbonization and shrinkage, the life time of concrete is extended greatly .
Fields of Application
All grades of pumping concrete and economical concrete for long-distance transport
High strength concrete, owing concrete, self-compacting concrete, mass concrete, high performance concrete and clear water concrete structures
All sorts of industrial and civil building projects, high-compressive-strength concrete structures, especially in large scale concrete structures, which require the high durability of concrete
Produce large-scale prestressed concrete beam or board, and steam curing concrete etc.
Physical properties
Items
Specification
Appearance
Red
Solid content wt.%
40.0¡À1.0
Specific gravity (20¡æ)
1.11¡À0.01
pH value
7¡À1
Chloride content %
¡Ü0.01.
Dosage
Dosage: 0.6~1.2% of total cementitious materials. Increase dosage to 1.0~2.0% when manufacture the high-compressive-strength concrete.
The optimum mix design needs to be determined by the requirements of the project, specialties of materials and mixture tests before usage.
Can not be mixed with naphthalene-based admixture; the compatibility of combination with other admixtures needs to be conformed by mix tests.
The factors, which include the amount of mud in sand and grave, the variation of admixture quality, can a¬ffect water reducing performance of this product in a big range.
Product Description
This product is a water-soluble polycarboxylate plastic retaining agent, which can prohibit slump loss of concrete. It is capable to mix with other polycarboxylate superplasticizers. This product accords with GB8076-2008, JG/T233 fi¬rst-class standards, and also satisfi¬es the No. [2005]101
Speci¬cation of National Ministry of Railways.
Benefits :
High plastic retaining performance, slump loss of concrete is control between 80~90%
High liquidity and guaranteed slump range, small rate of slump loss after mixing with PCA superplasticizers.
The signi¬ficant enhancement effect to concrete hardening
Well workability, no segregation, no bleeding and high pumpability
No chlorine, low alkalis
Air content can be adjusted by project requirements Signi¬ficant improvement in preventing freezing, segregation, carbonization and shrinkage, the life time of concrete is extended greatly.
Fields of Application
All grades of pumping concrete and economical concrete for long-distance transport
High strength concrete, owing concrete, self-compacting concrete, mass concrete, high performance concrete and clear water concrete structures.
All sorts of industrial and civil building projects, high-compressive-strength concrete structures, especially in large scale concrete structures, which require the high durability of concrete.
Produce large-scale prestressed concrete beam or board, and steam curing concrete etc.
Dosage
Mix with PCA superplasticizers following the proportions of 3:7, 4:6 or 5:5.
Can not be mixed with naphthalene-based admixture; the compatibility of combination with other admixtures needs to be conformed by mix tests.
The factors, which include the amount of mud in sand and grave, the variation of admixture quality, can a¬ffect water reducing performance of this product in a big range.
HW-2 series Polycarboxylate superplasticizer is one of the west generation highly effective water reducer of our corporation, the technology is original creation, and the synthetical function is excellent. It is can produce different strength grade of the concrete and is prepare normal concrete ideally admixture. HW-2 series Polycarboxylate superplasticizer is use in self-compacting concrete,high performance concrete and dry-mixed mortar.Ití»s technical-economical performances unattainable in the past.
Is a high-performance polycarboxylate superplasticizer developed by HUAXUAN HIGH TECHNOLOGY to meet the needs of different concrete slump protection. This series of water reducers have excellent slump retention and extremely high water reduction rate through molecular structure optimization design, which greatly improves the plastic index of fresh concrete and improves its pumping and construction properties. At the same time, the strength growth and structural development of hardened concrete have also been significantly improved. The product has a low content and strong adaptability to various concrete raw materials, and it can meet various requirements for concrete slump protection under pumping, medium and low slump, long-term transportation, and high-temperature construction conditions.
By adding HUAXUAN HIGH TECHNOLOGY�® KH-206 can obtain the following results:
(1) Excellent slump retention: within a certain period of time, the fluidity increases by time, till it increases to the maximum value.
(2) Ultra-high water reduction rate: the water reduction rate is as high as 40% or more;
(3) The concrete has good mobility, easy pouring, and easy construction;
(4) Good workability: no segregation and no bleeding, which is conducive to concrete strength growth and structural development.
(5) Wide adaptability: adapt to various cements and admixtures.
Appearance:light yellow liquid
Solid content:50%
Application:
It is suitable for concrete with high requirements for slump retention, such as large-volume concrete, long-distance conveying concrete and pumping concrete. It is especially suitable for maintaining concrete slump under long-term transportation and high-temperature construction conditions,also it is suitable for various Water conservancy, marine engineering, ports, transportation, electric power and other national key projects that require high concrete performance,especially recommended for high-strength high-performance concrete, super-fluid, earthquake-free and self-compacting concrete.
How to use:
It is recommended to be used in combination with other water-reducing polycarboxylic acid water-reducing agent mother liquor. The ratio of water-reducing mother liquor to slump-preserving mother liquor is better to be (90%-50%): (10%-50%), and the solid content after compounding should be 0.05%~0.25% of the cementitious material.After being diluted in proportion, add it to the concrete mixer together with water,and youâ??ll see better effects when adding retarder of 1-4% of the quality of the water reducing agent.
If you are interested in our company's products, you can contact us, the following is our contact information:
HUAXUAN HIGH TECHNOLOGY�® KH-204
Is a new version high-performance polycarboxylic superplasticizer. Compared with other high efficiency water-reducing agents,it has the properties of ultra-high water reduction,low shrinkage,low bleeding rate and small avalanche loss.
Ultra-high water reducing rate:up to 40%,particularly significant in high-grade concrete (above C50).In the same condition,it costs less material to get the same effect.
Excellent plastic retention:
Excellent plastic retention performance: Because the steric hindrance of the extended polymer side chain effectively hinders the secondary agglomeration between cement particles, the product has high dispersion and can maintain this performance for a long time.
Good early strength and strengthening effect: under the same conditions, the concrete mixed with this product has a higher early strength and strengthening effect than other types of superplasticizers.
Significantly improve the durability of concrete: The product has a low alkali content, and because itâ??s an air-entraining type high efficiency water reducing agent, it significantly reduces the alkali-aggregate reaction of concrete and improves the freeze-thaw resistance of concrete.
Stability: The concrete shrinkage and creep properties will be effectively improved after adding the product,in the meanwhile, it gains a good stability, so there are lower risks of cracks.
Appearance: Powder: white(98%)
Liquid:white or yellow(40%)
Water Content(Power)(%) ¡¨¹3.0
PH Value(20¡æ)(20% Liquid) 6.0~8.0
Air Content(%) ¡¨¹5.0
Concrete Water Reduction Ratio(%) ¡Y26.0 (25%-35%)
Dosage Recommendation(%)
In relation to weight of binder Power:0.16~0.3% total cementitious material
Polycarboxylate superplasticizer 50% (High water reducing type)
Polycarboxylate superplasticizer is a new generation of high performance polycarboxylic acid superplasticizer was prepared from methyl allyl alcohol polyoxyethylene ether macromonomer by free radical polymerization, it is containing 50% solid content. It has a higher water reduction rate and
a certain slump protection function, to ensure the excellent working performance of
concrete, higher strength and excellent durability, mainly used for export, transport
distance is relatively long mother customers.
Product Feature:
1.The higher water reduction rate can reach more than 40%.
2.Low viscosity and low thixotropy, It is more suitable for concrete with
low water cement ratio
Polycarboxylate superplasticizer is the third-generation high-performance water-reducing agent developed after the general water-reducing agent represented by lignosulphonate and naphthalene superplasticizer.
1. Good compatibility with various cements,good slump retention performance of concrete,and extend construction time of concrete.
2. Low dosage,high water reduction,small shrinkage.
3. Greatly improve the early and late strength of concrete.
4. The product has low chloride content and low alkali content,which is beneficial to the durability of concrete.
5. The production process of this product is non-pollution and does not contain formaldehyde.
6. Using polycarboxylate superplasticizers,more slag or fly ash can be used instead of cement to reduce costs.
Polycarboxylate Superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete.With initiating systerm and reaction conditions,we achieve high adaptability.Comparing with PNS and other superplasticizer, superplasticizer has many characteristic advantages in technology and performance as following:
(1) low dosage, high rate of water reducing;
(2) keep concrete good slumption retention;
(3) good compatibility with cement;
(4) small shrinkage of concrete to keep the stability of volume and durability;
(5) environmental in production and usage. Base on above advantages.
Polycarboxylate Based Superplasticizer is the third generation concrete plasticizer which advance developed from lignosulfonate calcium type and naphthalene type plasticizer.
Polycarboxylate is the latest liquid type superplasticizer with slump retention performace developed from superplasticizer.
Polycarboxylate is a modify liquid type superplasticizer researched by new technology.it is a greeen environmental product with good comprehensive index and no pollution.
Polycarboxylate superplasticizer (PCE) is a high-performance, water-reducing admixture for modern concrete applications. Utilizing advanced polymer technology, it offers superior slump retention and strength enhancement compared to traditional superplasticizers.
Performance Characteristics
--Water Reduction: 25-40% (vs. 15-25% for naphthalene-based)
--Slump Retention: Maintains workability for 2-4 hours
--Early Strength: 50-80% higher at 1 day vs. conventional SPs
--Compatibility: Works with all cement types (OPC, SCC, slag cement)
--Low Dosage: 0.1-0.3% by cement weight (1/3 of sulfonated melamine types)
Applications
1. Ready-Mix Concrete
Ideal for transit-mixed concrete requiring long workability
Reduces segregation in high-slump mixes (200-250mm)
2. Precast/Prestressed Concrete
Enables early demolding (12-16 hour cycle time)
Improves surface finish quality
3. Self-Consolidating Concrete (SCC)
Achieves 600-800mm flow without vibration
Maintains stability at low water/cement ratios (0.28-0.32)
PCE superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete.With initiating systerm and reaction conditions,we achieve high adaptability.
Polycarboxylate Superplasticzier we produce types as below:
1. High water reducing type
(normally they can be satisfied for concretes' requirements):
JH03 basic standard type(under most exported.)
JH09 viscosity adjustment is better than JH03,water reducing ratio is lower than JH03,(suitable for high clay content ratio of cement,under most exported.)
JH15 water reducing ratio is higher than JH03,performance is better than JH03,suitable for high strength concrete.(New Research and technology higher than JH03.)
2. Water reducing and slump retention type
JH02 water reducing and slump retention type.(New Research on base of JH03.)
3. High slump retention type
JH06 basic standard type,mix with JH03 and JH09 if concrete's slump retention is not satisfied.(under most exported.)
JH06K higher slump retention performance than JH06,price is higher than JH06,mixing with JH03 and JH09 if concrete's slump retention is not satisfied.(under most exported.)
JH16 Better performance and different technology with JH06 and JH06K,mixing with JH03,JH09 and JH15 if concrete's slump retention is not satisfied.(New Research and technology to satisfy JH15.)
Exporting loading: 20'GP container loading:
1. 220kg/drum, 80 drums
17.6 T
2. 1150kg/drum,20 drums
23 T
3. 20-25tons/flexitank.
20-25 T
524 Jly 01 Series Polycarboxylate Superplasticizer Suppliers
Short on time? Let Jly 01 Series Polycarboxylate Superplasticizer sellers contact you.
