We supply various types of UPVC pipe fittings including welded fittings there are two kinds of welded and nonwelded socket welded and threaded fittings flange fittings
Ball valve straight pipe straight elbow forward Tee pipe clamp abnormal straight reducing elbow cross loose jointpipe cap copper inner wire straight copper inner wire Tee outer wire direct head loose joint direct head loose elbow
1 Fittings used for connecting pipes are flange loose joint pipe hoop clamp sleeve throat hoop etc
2 Fittings change the direction of the pipe elbow bend pipe
3 Fittings change the diameter of the pipe reducing diameter reducing pipe reducing elbow branch pipe reinforcing pipe
4 Fittings increase the pipe branch tee crossing
5 Fittings for pipe sealing gasket raw material belt thread flange blind plate pipe plug blind plate head welding plug
6 Fittings for pipe fixing clamp ring tow hook hanging ring bracket bracket pipe clamp etc
Product Details:
Usage/Application Industrial
Type Lap Joint Flanges
Size 1-5 inch, 0-1 inch, 20-30 inch, 5-10 inch, 10-20 inch
Material Standard ASTM A182, ANSI B16.5, ASTM A351, ASTM A105
Rated Pressure (Bar) 2500
I Deal In New Only
Material Stainless Steel
Country of Origin Made in India
We can offer vide range of Lap Joint Flanges from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. Various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Fittings, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc.
Specifications: Can offer Lap Joint Flanges as cast, forged, normalized, annealed, quenched (hardened) tempered condition with black or bright (proof machined) finish.
Various type of IBR approved Flanges that can be procured are as follows: Blind, Slp-On, Welding Neck (Weldneck), Long Welding Neck (LWN), Socket Weld, Lap Joint, Threaded, Spectacle Blind, Plate, Collar, Flat Face, Raised Face, Ring Type Joint, etc.
Size range of flanges that can be offered are �½â?? inch upto 60â?? inch depending on type, class grade of flanges.
Class of flanges: #150, #300, #400, #600, #900, #1500, #2500
Product : Sant Cast Steel Y Type Strainer
Type of Pattern : Y Type
Body Material cum standard : CCS (ASTM A-216 Gr. WCB)
Product Description : Bolted Cover Type
Trim : AISI-304, Screen 1.2mm dia perforation
End Details : Flanges as per BS10 Table F/Class-150
Testing & Certification
Body Test Pressure : 40kg/cm Hyd.
Maximum Working Pressure : 20kg/cm
Maximum Working Temperature : 400 C
Our Works Test Certificate is furnished with every supply.
Plunger Type Pumps, Hydraulically Actuated Diaphragm Type Pumps, Mechanically Actuated Diaphragm Type Pumps, Solenoid, Operated Diaphragm Dosing Pumps, Complete Skid Mounted Dosing Systems, Chemical Process Pumps, Seal free Magnetic Drive Pumps, Progressive Pumps, Y Type Strainers, Pulsation dampners, etc.
PPH Strainer Y Type Socket DIN PN10 is for filter the inpurity inside the pipeline to protect the system working well and safe. the screen of strainer is made by PP or stainless steel with mesh customized if need. the screen can be taken out clean or replace easily, PVC strainer is socket end fit for standard DIN, ANSI , JIS, CNS. it widely used in water system, waste water treatment, ect
PVC Y strainer have the following specification and features
Feature of valve
Transparent PVC body is convenient to observe the medium.Â
Screen can be taken out and clean.
Union design is convenient to install and replace the strainer.Â
Suitable for horizontal and vertical installation.Â
Stainless steel screen is optional.
Product : Bronze Y-Type Strainer
Type of Pattern : Y Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Y-Type Screwed in cover, SS 304 Screen having 0.5mm Dia perforations
End Details : Screwed female BSP Taper threads to BS 21.
Testing & Certification
Hydraulic Test Pressure : 500 Psig.Hyd.
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm )
Maximum Working Temperature : 435 F (225 C)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Y-Type Strainer
Type of Pattern : Y Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Y-Type Screwed in cover, SS 304 Screen having 0.5mm Dia perforations
End Details : Flanges as per BS 10 Table H F.F. undrilled
Testing & Certification
Hydraulic Test Pressure : 500 Psig.Hyd.
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm)
Maximum Working Temperature : 435 F (225 C)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Cast Steel Y-Type Strainer
Type of Pattern : Y-Type
Body Material cum Standard : CCS (ASTM A216 Gr.WCB)
Description : Y-Type Bolted Cover
Trim : SS AISI-304 Screen having 1.2 dia perforation
End Details : Flanges as per BS 10 Table J FF Undrilled
Testing & Certification
Body Test Pressure : 700 Psig Hyd.
Working Pressure : Max. BOP 350 Psig.
Maximum Working Temperature: 400C
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
* H-beam is a kind of Economic section steel, which sectional area distribution is more optimized, the ratio of strength to weight is more reasonable, Mechanical properties of section is more better.It is developed from the I-section steel optimization of a better section mechanical properties of the economic section steel, because its section is same as the English letter "H" ,so be named as H-Beam. Because the various part of H-beam is arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, so it has been widely used.
* H-beam as a new type of economic construction steel. The section shape of H-beam steel is economical and reasonable, the mechanical properties are good, and the elongation of each point on the section is uniform and the internal stress is small. Compared with the ordinary I-beam steel, it has the advantages of more large section modulus,more light weight and more saving metal, which can reduce the building structure by 30-40%.
* And because its legs inside and outside parallel, leg end is a right Angle, assembled into components, can save the workload of welding and riveting up to 25%. It is often be used in large buildings (such as workshops, high-rise buildings, etc.), as well as Bridges, ships, lifting and transportation machinery, equipment foundation, supports, foundation piles, etc.
Product : Carbon Steel H beam
Standard AISI, ASTM, BS, DIN, GB, JIS, etc
Web Width: 100-900mm Thick: 5-16mm
Flange : Width:100-400 Thick: 7-34mm
Length : 5.8m-12.0m or as your requirement
Packing details : In bundle with 6 circles of steel strip, each bundle about 2mts.
Surface : Pickling, Phosphating, Galvanizing
Inspection : BV,SGS,MTC,etc.
Warehouse : Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Application field
* The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow
With the rise of new economic building materials, galvanized H-shaped steel is widely used, especially in steel structure buildings, supports, and bridges. In short, it is integrated with many aspects of daily life.
H-beam is a kind of Economic section steel, which sectional area distribution is more optimized, the ratio of strength to weight is more reasonable, Mechanical properties of section is more better.It is developed from the I-section steel optimization of a better section mechanical properties of the economic section steel, because its section is same as the English letter "H" ,so be named as H-Beam. Because the various part of H-beam is arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, so it has been widely used.
H-beam as a new type of economic construction steel. The section shape of H-beam steel is economical and reasonable, the mechanical properties are good, and the elongation of each point on the section is uniform and the internal stress is small. Compared with the ordinary I-beam steel, it has the advantages of more large section modulus,more light weight and more saving metal, which can reduce the building structure by 30-40%. And because its legs inside and outside parallel, leg end is a right Angle, assembled into components, can save the workload of welding and riveting up to 25%. It is often be used in large buildings (such as workshops, high-rise buildings, etc.), as well as Bridges, ships, lifting and transportation machinery, equipment foundation, supports, foundation piles, etc.
Product : Galvanized H beam
Standard : AISI, ASTM, BS, DIN, GB, JIS, etc
Web Width : 100-900mm Thick: 5-16mm
Flange : Width:100-400 Thick: 7-34mm
Length : 5.8m-12.0m or as your requirement
Packing details : In bundle with 6 circles of steel strip, each bundle about
2mts.
Surface : Perforated/galvanized/black
Inspection : BV,SGS,MTC,etc.
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Packing and shipping
* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
718 Jis 10K 80A Scs13 Y Type Flange Strainer Suppliers
Short on time? Let Jis 10K 80A Scs13 Y Type Flange Strainer sellers contact you.
