Key worlds: jaw crusher, stone crusher, rock crusher, crushing machine, crusher
Crushers from zhengzhou vipeak heavy industry machinery co., ltd can be used in metallurgical industry, mining industry, chemical industry, building material, highway, railway, water industry and etc. They can be used to crush all kinds of mine and other massive materials into the granule, for the secondary crushing and the fine crushing.
The highest anti-pressure strength of crushed material is 2000kg/cm2.
The size of crushed material should conform to the stipulation in the table of specification.
The too sticky material will affect the capacity of the machine.
Models available:
Pe-400*600jaw crusher
Size of feeder opening (mm): 600*400
Max. Feeding size (mm): 350
Capacity( t/h ):15-50
Motor power (kw):37
Overall dimensions (mm): 1700*1732* 1653
Weight (t): 6.8
600*í900 jaw crusher
Size of feeder opening (mm): 900*600
Max. Feeding size (mm): 480
Capacity( t/h ): 45-110
Motor power (kw): 75
Overall dimensions (mm): 2290*2206*2370
Weight (t):17
750*1060 jaw crusher
Size of feeder opening (mm): 1060*750
Max. Feeding size (mm): 630
Capacity( t/h ): 105-195
Motor power (kw): 110
Overall dimensions (mm): 2655*2302*3110
Weight (t): 29
500*750 jaw crusher
Size of feeder opening (mm): 500*750
Max. Feeding size (mm): 425
Capacity( t/h ): 15-65
Motor power (kw):55
Overall dimensions (mm): 2035í1921í2000
Weight (t):12
Jaw Crusher is one of the most popular stone-crushing equipments in the world, Jaw Crusher is ideally suitable for primary and secondary crushing. The highest anti-pressure strength of crushed material is 320MPa. It is widely used in mining, metallurgy, construction, highway, railroad, and chemistry industries and etc. Many models are available according to your different fineness requirements.
Main structure of Jaw Crusher:
Jaw Crusher mainly consists of main frame, eccentric shaft, belt wheel, flying wheel, movable jaw plate, side board, toggle plate, back seat for toggle plate; gap adjusting
screw, returning spring, fixed jaw plate, movable jaw plate and so on. The toggle plate also plays the role of protecting.
Working Principle of Jaw Crusher:
Motor drives belt and belt pulley, makes moving jaw up and down through eccentric shaft. When the moving jaw is up, the angle between lining plate and moving jaw becomes large, and this will push moving jaw plate close to the fixed jaw plate. During this process, the material is crushed and ground, thus the crushing will be done. When the moving jaw is down, the angle between lining plate and moving jaw becomes small, the moving jaw plate will leave the fixed jaw plate on account of the effect of pulling bar and spring, and then the crushed material will be discharged from the lower opening of the crushing room. With the motor continuously rotating and the material periodically crushed and discharged by the crusher, the mass production can be realized.
Jaw crusher is based on years of product development. The continuous improvement and refinement has made them the preferred jaw crusher among professionals and our customers. Pe series jaw crusher is suitable for even hardest rock and recycle materials. In stone crushing plant, for example, our jaw crushers are able to work continuously with reliable quality and crushing economy. Our jaw crusher machine is suitable for both stationary and mobile crushing process.
Vipeak jaw crushers are primarily used for reducing various kinds of stones and lump materials into medium-grained gravel. The materials to be crushed can be hard, medium-hard and soft minerals whose compressive strength should be not more than 320 mpa. Our jaw crushers adopt v-shape inlet, resulting in higher crushing efficiency. Currently, these products become the preferred primary crushing equipment in the production of stone. They are widely used in many industries, such as mining, metallurgy, building material, railway, water conservancy, chemicals, and so on.
Jaw crusher performance and features
1) simple structure, easy maintenance
2) stable performance
3) flexible capacity
4) over loading protection
5) stable performance
6) stable performance
7) even final particles and high crushing ratio
8) high efficiency and low operation cost
9) alternative ordinary and hydraulic types
Jaw crusher working principle
This jaw crusher uses motor as its power. Through the motor's wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening.
Impact Crusher is used in both primary and secondary crushing applications of aggregate, and in recycle crushing of reinforced concrete, asphalt and other construction and debris. VIPEAK is a reliable supplier of Impact Crusher with new design.
Impact Crusher is composed of rotor, impact rack, frame, ratchet cover device, Transmission Device and other parts.
Working Principle of Impact Crusher:
When the Impact Crusher works, the motor drives the rotor rotate of the Impact Crusher with high speed, on the rotor where installed the hammers. When the materials get into the area which the hammers affect, under the impact function of the hammer at a high speed, the materials are thrown to the impact device above the rotor continuously. And then the materials are rebounded from the impact liner to the area where the hammers effects for being re-crushed. The materials from large to small all to be crushed at the impact chamber repeatedly. The process wont stop till the material are crushed to the required size and then discharged from outlet of the impact crusher.
5054 Jaw Crusher(Vipeak) Suppliers
Short on time? Let Jaw Crusher(Vipeak) sellers contact you.
For higher productivity, better reliability and flexibility, long service life, and better final product quality, the Symons type cone crusher is absolutely your best choice.
Symons type cone crusher offer several outstanding features such as excellent tramp release system, unique hydraulic lifting system, high crusher throw and reasonable cavity design, all of these features ensure the Symons type cone crusher can offer the unbeatable performance in secondary, tertiary and quaternary applications.
If your aggregate or mining business demands the 24-hours running, high-reduction, big capacity application, you will find the Symons type cone crusher optimized for your demands.
The innovations like the stable lubrication, excellent sealing feature, great abrasive material applied in key components and rugged construction effectively reduce the wear rate , extend the replacement period of the spare parts, evidently reduce the production cost in per ton hour material processed. All of these can help you to achieve the highest level of profitability.
The jaw crusher is the main equipment for coarse crushing (a section of crushing).
The main features are:
Simple structure, reliable performance, easy operation, easy maintenance, safe use, strong applicability, cheap price.
The jaw crusher is divided into two forms: compound pendulum and simple pendulum.
The main parts of a broken jaw are:
Frame, movable jaw, active eccentric shaft, supporting shaft (simply swinging), connecting rod, adjusting jack,
Model description:
Lining plate, fixed tooth plate, movable jaw plate, transmission bearing, movable jaw bearing, belt wheel, flywheel.
Small jaw fracture is compound pendulum.
Large jaw broken simple pendulum more, and the frame is divided into upper and lower compartments.
Model description:
P E F (J) XX to XX
P: crusher
E: jaw crusher
F(J): Compound pendulum (simple pendulum)
XX: Give the opening width mm/100
XX: Length of mine outlet mm/100
Brief introduction
Jaw crusher is a kind of Stone crusher, and jaw crusher is also called Rock crusher. This series of Jaw crushers have many advantages which mainly used in breaking a variety of ore and the medium-size chunk of materials. The compression strength of the materials to be crushed is less than 320MPA. it can be divided into coarse crusher and fine crusher. We have all specification kinds of the products, and its feedstock size is 125mm-750mm. It is the first choice for Stone crusher plant; Primary jaw crusher is widely used in mining, metallurgy, building materials, roads, railways, water conservancy and chemical industries, etc.
Features and Advantages
1) High efficiency and low operation cost;
2) Flexible capacity; Over loading protection;
3) Simple structure and easy to operate;
4) Easy replacement of wearing parts;
5) Long service life; High reliability;
6) Wide range of choices;Alternative ordinary and hydraulic types.
Jaw crushers / Jaw breakers operating environment
When in the process of the great broken stones broke into small stones, the first crusher is often referred to as �¢??master�¢?? crusher, the longest history and most solid crusher is jaw crusher. When feed to jaw crusher, materials from the top of the entrance into the broken room with tooth broken, the tooth broken tremendous force the material to the top of the wall, it will be broken into smaller stones. Supporting the tooth movement is an eccentric shaft. This axis runs through the fuselage frame. Eccentric movement is usually arisen by fixed at both ends of the flywheel axis. Flywheel and eccentric support bearing is often using spherical roller bearings. Bearing working environment is extremely harsh. Bearings must support enormous impact loadabrasive water and high temperature. Though the working environment is extremely harsh, the jaw crusher still can work very reliably. this is a key element to ensure the productivity.
Working principle
The main structure of the Jaw crusher are composed of stander, eccentric shaft, belt pulley, flywheel, movable jaw plate, wrist plate ,adjustable gap screw, offsetting spring, fixed jaw plate. The wrist plate also has the effect of guarding.
This Jaw crusher�¢??s crushing style is the type of driving extrusion. The motor drives the belt and belt pulley to make the moveable jaw move through the eccentric shaft. When movable jaw is rising ,the included angle between the wrist plate and movable jaw become bigger to drive the movable plate to be close to the movable plate. At the same time the material is squeezed and rubbed, rolled to achieve multiple crushing; When movable jaw is descending, the included angle between the wrist plate and movable jaw becomes smaller. Now the crushed material is discharged from the crushing cavity, with the continuous rotation of the motor, the movable jaw crushing and discharging the material periodically to realize batch production.
The jaw crusher is of curved extrusion type. When working, the motor drives the belt and pulley to move the movable jaw up and down through the eccentric shaft. When the movable jaw rises, the angle between the elbow plate and the movable jaw becomes larger, so as to push the movable jaw plate to approach the fixed jaw plate. The material can be multi broken through the extrusion, rubbing and grinding between the two jaw plates. When the movable jaw goes down, the angle between the elbow plate and the movable jaw becomes smaller, and the movable jaw plate is under the action of the pull rod and spring. After leaving the fixed jaw plate, the crushed materials are unloaded freely through the discharge port at the lower part of the jaw cavity under the action of gravity. With the continuous rotation of the motor, the moving jaw performs periodic crushing and discharging to achieve mass production.
The jaw crusher is of curved extrusion type. When working, the motor drives the belt and pulley to move the movable jaw up and down through the eccentric shaft. When the movable jaw rises, the angle between the elbow plate and the movable jaw becomes larger, so as to push the movable jaw plate to approach the fixed jaw plate. The material can be multi broken through the extrusion, rubbing and grinding between the two jaw plates. When the movable jaw goes down, the angle between the elbow plate and the movable jaw becomes smaller, and the movable jaw plate is under the action of the pull rod and spring. After leaving the fixed jaw plate, the crushed materials are unloaded freely through the discharge port at the lower part of the jaw cavity under the action of gravity. With the continuous rotation of the motor, the moving jaw performs periodic crushing and discharging to achieve mass production.
PE Jaw Crusher series:broken granularity,simple structure,reliable operation,easy maintenance,low operating cost,widely used in mineral,smelting,construction,high-way, rail-way,irrigation area.It could be the first choice for raw material or second crushing.
PE Jaw crusher series:broken granularity,simple structure,reliable operation,easy maintenance,low operating cost.It could be the first choice for raw material or second crushing.Advantages:short toggle,low hanging,big swing angle,long useful life,easy maintenance.
Jaw crusher introduction
Jaw crushers have two types: pe and pex series.Mainly used to crusher all kinds of mining stones primarily, and the largest compression resistance of the material is 320mpa.It is suitable for all kinds of ore and rock primary crushing or secondary crushing. Pe series is used to primary crushing, pex series is used in secondary crushing and fine crushing.
T-bolt, clamp.
Jaw crusher working principle
The jaw crusher adopts the electric motor as the power. The eccentric shaft is revolved by an electric motor through v-belts. It causes the swing jaw following the preconcerted path to crush the feeding material. Thus the material will be crushed in the crushing chamber which is composed of the stationary jaw plate, swing jaw plate and the liner plate. The material is discharged from the lower part of machine that is what you want.
Features and benefits of jaw crusher
1.Simple structure and reliable operation. Easy maintenance and low operating cost.
2.The frame of jaw crusher is very firm due to removing welding residual stress.
Jaw crusher is mainly used to crush kinds of mining stones primarily, and the largest compression resistance of the material to be crushed is 320mpa. The jaw crusher is widely used in mining, metall industry, building material, highway, railway, and chemical industry.
Jaw Crusher Characteristic and Advantage
Simple and strong structure, large crushing ratio, high output.
Adopts world-class manufacturing technology and be made of high manganese steel (work hardening steel).
Compound pendulum jaw crusher, coarse crushing equipment
Casting molding at a time, with wear-resistant & pressure-resistant, having longer crushing life
Mainly used for breaking large, medium and small hard stones and the corresponding object.
Stable performance, low production cost and even particularly convenient maintenance.
Stone Jaw Crusher Machine Application
Mining, metallurgy, construction, highway, railway, water and chemical industry Jaw crusher machine suitable Materials: Marble, granite, basalt, limestone, quartz stone, gravel, iron ore, copper ore etc. jaw crusher exporter
Stone Jaw Crusher Machine Advantages
1.Good stability, high reliability
Moving jaw Assembly adopts the high quality casting components,heavy eccentric axis also forging billets for processing, which makes the Jaw Crusher with exceptional stability. Compared with other crushing machine of the same specification, we use the eccentric shaft bearings of larger and more durable,so that it has a higher carrying capacity, ensuring their reliability. jaw crusher exporter
1. All kinds of model available 2. Stable and reliable operation 3. High reduction ratio 4. Uniform-sized finished products 5. Easy to maintain 6. Low operating cost 7.Deep crushing chamber 8.Wide size range of discharging opening 9. The machine has a better performance with the hydraulic coupling.
Jaw crusher is one of the most common crushing equipment. It is mainly applied in crushing the material with the compressive strength under 320mpa. This jaw crusher is usually used in the field of mining, metallurgy, road & railway construction, water conservancy, chemical industry and so on. The jaw crusher of medium and large size designed and manufactured by our company have reached the advanced level with the features of high crushing ratio, high capacity, uniformed product size, simple structure, reliable operation, easy maintenance and low operation cost. Pe venient spare part replacement and easy maintenance.
6.Energy-saving: the stand-alone can reduce the energy consumption by 15-30% while the whole system can save energy by double.
7.Large discharge open range, which can meet different customers' requirements.
8.Low noise and dust pollution.
Jaw Crusher is most widely used in the international market and has the features of high crushing ratio, even granule, simple structure easy maintenance, etc. It can be used for fine crushing and coarse crushing. The highest compressive resistance of the crushed materials is 320Mpa. The large and medium-size jaw crushers are the key products of our company. Especially in designing and producing the large-size jaw crusher, we have stood in the front line of our country.
Jaw crusher product description:
Jaw crusher series have features of big crushing ratio, uniform products size, simple structure, reliable work, easy maintenance and low cost. It is widely used in stone mining, metallurgy industry, building material, highway, railway, water conservancy and chemical industries. Various material with compression resistance less than 320mpa can be crushed.
Exporting standard, spare parts will ba packed in wooden cases.
5054 Jaw Crusher(Vipeak) Suppliers
Short on time? Let Jaw Crusher(Vipeak) sellers contact you.
