Jaw Crusher

The jaw crusher is the main equipment for coarse crushing (a section of crushing).
The main features are:
Simple structure, reliable performance, easy operation, easy maintenance, safe use, strong applicability, cheap price.
The jaw crusher is divided into two forms: compound pendulum and simple pendulum.

The main parts of a broken jaw are:
Frame, movable jaw, active eccentric shaft, supporting shaft (simply swinging), connecting rod, adjusting jack,
Model description:
Lining plate, fixed tooth plate, movable jaw plate, transmission bearing, movable jaw bearing, belt wheel, flywheel.
Small jaw fracture is compound pendulum.
Large jaw broken simple pendulum more, and the frame is divided into upper and lower compartments.

Model description:
P E F (J) XX to XX
P: crusher
E: jaw crusher
F(J): Compound pendulum (simple pendulum)
XX: Give the opening width mm/100
XX: Length of mine outlet mm/100

Brief introduction
Jaw crusher is a kind of Stone crusher, and jaw crusher is also called Rock crusher. This series of Jaw crushers have many advantages which mainly used in breaking a variety of ore and the medium-size chunk of materials. The compression strength of the materials to be crushed is less than 320MPA. it can be divided into coarse crusher and fine crusher. We have all specification kinds of the products, and its feedstock size is 125mm-750mm. It is the first choice for Stone crusher plant; Primary jaw crusher is widely used in mining, metallurgy, building materials, roads, railways, water conservancy and chemical industries, etc.
Features and Advantages
1) High efficiency and low operation cost;
2) Flexible capacity; Over loading protection;
3) Simple structure and easy to operate;
4) Easy replacement of wearing parts;
5) Long service life; High reliability;
6) Wide range of choices;Alternative ordinary and hydraulic types.
Jaw crushers / Jaw breakers operating environment
When in the process of the great broken stones broke into small stones, the first crusher is often referred to as �¢??master�¢?? crusher, the longest history and most solid crusher is jaw crusher. When feed to jaw crusher, materials from the top of the entrance into the broken room with tooth broken, the tooth broken tremendous force the material to the top of the wall, it will be broken into smaller stones. Supporting the tooth movement is an eccentric shaft. This axis runs through the fuselage frame. Eccentric movement is usually arisen by fixed at both ends of the flywheel axis. Flywheel and eccentric support bearing is often using spherical roller bearings. Bearing working environment is extremely harsh. Bearings must support enormous impact loadabrasive water and high temperature. Though the working environment is extremely harsh, the jaw crusher still can work very reliably. this is a key element to ensure the productivity.
Working principle
The main structure of the Jaw crusher are composed of stander, eccentric shaft, belt pulley, flywheel, movable jaw plate, wrist plate ,adjustable gap screw, offsetting spring, fixed jaw plate. The wrist plate also has the effect of guarding.

This Jaw crusher�¢??s crushing style is the type of driving extrusion. The motor drives the belt and belt pulley to make the moveable jaw move through the eccentric shaft. When movable jaw is rising ,the included angle between the wrist plate and movable jaw become bigger to drive the movable plate to be close to the movable plate. At the same time the material is squeezed and rubbed, rolled to achieve multiple crushing; When movable jaw is descending, the included angle between the wrist plate and movable jaw becomes smaller. Now the crushed material is discharged from the crushing cavity, with the continuous rotation of the motor, the movable jaw crushing and discharging the material periodically to realize batch production.

The jaw crusher is of curved extrusion type. When working, the motor drives the belt and pulley to move the movable jaw up and down through the eccentric shaft. When the movable jaw rises, the angle between the elbow plate and the movable jaw becomes larger, so as to push the movable jaw plate to approach the fixed jaw plate. The material can be multi broken through the extrusion, rubbing and grinding between the two jaw plates. When the movable jaw goes down, the angle between the elbow plate and the movable jaw becomes smaller, and the movable jaw plate is under the action of the pull rod and spring. After leaving the fixed jaw plate, the crushed materials are unloaded freely through the discharge port at the lower part of the jaw cavity under the action of gravity. With the continuous rotation of the motor, the moving jaw performs periodic crushing and discharging to achieve mass production.

The jaw crusher is of curved extrusion type. When working, the motor drives the belt and pulley to move the movable jaw up and down through the eccentric shaft. When the movable jaw rises, the angle between the elbow plate and the movable jaw becomes larger, so as to push the movable jaw plate to approach the fixed jaw plate. The material can be multi broken through the extrusion, rubbing and grinding between the two jaw plates. When the movable jaw goes down, the angle between the elbow plate and the movable jaw becomes smaller, and the movable jaw plate is under the action of the pull rod and spring. After leaving the fixed jaw plate, the crushed materials are unloaded freely through the discharge port at the lower part of the jaw cavity under the action of gravity. With the continuous rotation of the motor, the moving jaw performs periodic crushing and discharging to achieve mass production.

PE Jaw Crusher series:broken granularity,simple structure,reliable operation,easy maintenance,low operating cost,widely used in mineral,smelting,construction,high-way, rail-way,irrigation area.It could be the first choice for raw material or second crushing.

PE Jaw crusher series:broken granularity,simple structure,reliable operation,easy maintenance,low operating cost.It could be the first choice for raw material or second crushing.Advantages:short toggle,low hanging,big swing angle,long useful life,easy maintenance.





Dimensions:1430*1310*1340mm
Weight:2.8t
Handle ability:4-14t/h

Jaw crusher is based on years of product development. The continuous improvement and refinement has made them the preferred jaw crusher among professionals and our customers. Pe series jaw crusher is suitable for even hardest rock and recycle materials. In stone crushing plant, for example, our jaw crushers are able to work continuously with reliable quality and crushing economy. Our jaw crusher machine is suitable for both stationary and mobile crushing process.
Vipeak jaw crushers are primarily used for reducing various kinds of stones and lump materials into medium-grained gravel. The materials to be crushed can be hard, medium-hard and soft minerals whose compressive strength should be not more than 320 mpa. Our jaw crushers adopt v-shape inlet, resulting in higher crushing efficiency. Currently, these products become the preferred primary crushing equipment in the production of stone. They are widely used in many industries, such as mining, metallurgy, building material, railway, water conservancy, chemicals, and so on.
Jaw crusher performance and features
1) simple structure, easy maintenance
2) stable performance
3) flexible capacity
4) over loading protection
5) stable performance
6) stable performance
7) even final particles and high crushing ratio
8) high efficiency and low operation cost
9) alternative ordinary and hydraulic types

Jaw crusher working principle
This jaw crusher uses motor as its power. Through the motor's wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening.

Jaw crusher introduction
Jaw crushers have two types: pe and pex series.Mainly used to crusher all kinds of mining stones primarily, and the largest compression resistance of the material is 320mpa.It is suitable for all kinds of ore and rock primary crushing or secondary crushing. Pe series is used to primary crushing, pex series is used in secondary crushing and fine crushing.
T-bolt, clamp.

Jaw crusher working principle
The jaw crusher adopts the electric motor as the power. The eccentric shaft is revolved by an electric motor through v-belts. It causes the swing jaw following the preconcerted path to crush the feeding material. Thus the material will be crushed in the crushing chamber which is composed of the stationary jaw plate, swing jaw plate and the liner plate. The material is discharged from the lower part of machine that is what you want.

Features and benefits of jaw crusher
1.Simple structure and reliable operation. Easy maintenance and low operating cost.
2.The frame of jaw crusher is very firm due to removing welding residual stress.

Jaw crusher is mainly used to crush kinds of mining stones primarily, and the largest compression resistance of the material to be crushed is 320mpa. The jaw crusher is widely used in mining, metall industry, building material, highway, railway, and chemical industry.