Sprinkler irrigation is the irrigation system in which water required by the plant is sprayed like rain under the defined pressure. Water is transferred to sprinklers. Individual sprinkler system consists of the water source, pump, main pipeline, vertical pipeline, and sprinklers.
Sanbor Sprinkler Irrigation Pipes which are produced according to TS EN 12201-2 quality standard is made of high-density polyethylene (HDPE) and produced with 50-160 mm diameters and 5-6 meter length. Operating pressure is 6 atmospheres. The montage of SANBOR Sprinkler Irrigation Pipes is easy. They can be combined when the plastic seals and the clips at two sides are combined.
Advantages
Since there is no water loss in the system, water is used in the maximum level in the places where irrigation water is low (3.5 lt/sec).
It can provide irrigation without erosion in slopped lands.
Since the water is given to the soil with the rain effect, 20%-50% increase is observed in corp yield compared to other irrigation methods and quality is high. -During seed germination, the inability of the plant to reach above ground due to the layer created on the soil is prevented.
Ideal irrigation system in the soils with low depth and (shallow) permeable soils.
At the places closer to the sea, salt particles left by the sea water carried by wind, dust and insects can be washed via rain.
Since there is the opportunity to control water via sprinkler irrigation, it is the best irrigation method at the places whose groundwater level (drainage) is high.
Since there is no need for field ditches, planting area increases and agricultural works can easily be operated.
Vegetables, citrus, vineyards and other orchards can be protected from frost and heat.
Dissoluble fertilizers can be applied to vegetables with the irrigation water without extra work
Areas of Usage
It is used in the irrigation of slopped lands, wine yards, and gardens, vegetable, citrus and other orchards.
Things to take into account
While carrying, it should not be lifted and thrown. Clamps and clips can be broken.
It can stay under solar rays and be used in the fields during summer. No problem is observed.
Pipes should be stored at the possible temperatures between +5°C and +45°C.
Before using the seals for pipe connection, seal recesses should be cleaned. The seal should be completely placed.
High pressure created in motor pump outlets cause the removal of seals in the pipes. Pressure should be kept under control with a manometer. The promised pressure values on our pipes are under our warranty. In case of higher pressure levels than the indicated ones, the possible problems that can be created are not covered by the warranty
Pn16 irrigation pp fitting, pp compression fitting
Body(a)
Heterophasic block polypropylene co-polymer(pp-b) of exceptional mechanical properties even at high temperature.
Blocking bush(d)
Polypropylene
Nut(b)
Polypropylene with dye master of high stability to uv rays andsolidity to heat( s grade according to standard din54004)
Clinching ring(c)
Polyacetal resin(pom)with high mechanical resistance and hardness
O ring gasket(e)
Special elastomeric acrylonitrile rubber(epdm) for alimentary use
Reinforcing ring
Aisi 430 (uni x8cr17, w, nr 14828)stainless steel for female threads from 1to 4
Standard
Astm d2466, astm d2665 , bs4346, nbr5648, din
Machines
Injection machines
Working place
200psi@73â° f(23â°c)
Warranty
At least 50 years
Size
20-110mm
Pressure rate
Up to 16 bar (kg/ sq. Cm).
Model no.Diameter(mm)package quantity in one ctn(pcs)package gross weight(kg)package net weight(kg)packing size(mm)
Pfi09920*1/22522322580*410*330
Pfi10025*1/216820.519.5580*410*330
Pfi10125*3/416821.520.5580*410*330
Pfi10232*3/41052120580*410*330
Pfi10332*110522.521.5580*410*330
Pfi10440*1-1/44024.523.5580*440*350
Pfi10550*1-1/24024.523.5580*440*350
Pfi10663*1-1/22421.520.5540*530*330
Pfi10763*22421.520.5540*530*330
Pfi10875*2-1/2122928670*370*450
Pfi10990*3122928670*370*450
Pfi110110*4824.523.5580*440*350
Feature of product
1.)fast and reliable connections, extensively used worldwide
2.)easy to installation
3.)one source for all your ips, cts and metric needs.
4.)color coded, uv stabilized
5.)extensively used worldwide, iso9001certified.
Scope of application
Water distribution, industrial, leachate collection, irrigation and many other uses.
HDPE Irrigation Pipe Fittings
PE agricultural irrigation pipe fittings are practical patent products, which are of high quality and low cost and have internal locking rings, stepped ring seals and other components. Scientific design, strong fastness and good seal.
Tengyuan is a manufactuere of HDPE irrigation pipe fittings, Elbow Pipe Fitting and HDPE irrigation pipe. We are committed to improving the efficiency and safety of fluid delivery, realizing a healthier and more wonderful world. And our Pipe Floats Price is low and with good quality.
Type - Other Watering & Irrigation
Model Number - IR161020-2
Material - Plastic
Diameter - 16 MM
Wall thickness - 1,0 MM
Flow rate - 2 lph
Packaging - 400 meter
Dripper spacing - 20 CM
94572 Irrigation Fittings Suppliers
Short on time? Let Irrigation Fittings sellers contact you.
Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.
According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.
According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.
We sell at best price all kind of irrigations sistems , drip irrigations pipes , drip irrigations fittings , sprinkler irrigations , fittings , the products its made in Turkey .
Balaji Impex offers a premium range of PVC Pipes & Fittings, designed for durability, high performance, and leak-proof connections. Made from high-quality PVC material, they are corrosion-resistant, lightweight, and easy to install. Ideal for plumbing, drainage, and irrigation systems, our pipes and fittings ensure efficient water flow and long-lasting reliability for residential, commercial, and industrial applications.
Irrigation filters
Before designing an irrigation system you should carefully consider that efficient and reliable filtration is mandatory for a successful operation. Each application demands a unique type of filter.
Intra could become your advisor for choosing the most appropriate one among our wide range of products that includes:
- screen filters
- semi-automatic filters with spin plate
- disk filters
- sand media filters & batteries
- prefiltration systems
- self-cleaning systems
- fertilizer tanks
- hydrocyclones
- complete systems
Production Range : NIPPEN TUBESTM manufactures outlets (pipefitting) of socketweld and screwed connection types. Olets (pipe fitting) are manufactured according to proven designs and from the highest quality materials, the outlet components we supply are suitable for a variety of heavy duty applications. We supply outlet fittings in a number of hard wearing industrial grades to withstand high levels of flow and corrosion.
NIPPEN TUBESTM manufactures forged outlet / olet fittings to Boney & SAE standard from Classes 2000 lbs to 9000 lbs. We designs & manufactures outlet / olet ( pipefittings) of special type made according to drawing on request.
Product Name
Self-contained positive pressure air breathing apparatus with Electronic pressure gauge
Material - Alloy steel
Color - Black and White
Standard - EN 136
Cylinder volume - 6L
Working hours - 55-60mins
Working pressure - 30Mpa
Used - Firefighting
Pipe Fittings Metals offered for making butt-weld pipe fittings:
Monel, Nickle, Inconel, Hastalloy, Copper, Brass, Bronze, Titanium, Tantalam, Bismuth, Aluminium, High Speed Steel, Zinc, Lead Etc
Size: 1/8" NB TO 48" NB (Seamless & Welded)
Wall Thickness: Sch.5S to Sch:XXS.
94572 Irrigation Fittings Suppliers
Short on time? Let Irrigation Fittings sellers contact you.
