Description:
Durasynth dual fuel semi-synthetic 5W-30, API SN/CF is a high-quality engine oil, used for passenger cars, with synthetic base stocks and anti-wear additives for better wear protection of the engine and enhanced engine life.
Specifications:
Recommended especially for passenger cars and for cars with GDI engines as well.
Meets specification of API SN/CF.
Product Benefits:
Low viscosity and low HTHS for greater fuel economy, at the same time providing full engine protection through excellent wear control.
Enhanced protection against high-temperature deposits.
Superior sludge protection.
Used for Gasoline, Diesel and also can be used for CNG engines.
Diesel En590 10-50-500-5000 And Others Ppm Ultra Low Sulphur.
D2 0,2-62 Gost 305-82 Or 0,01 Or 0,05.
D2 Automotive Fuel Oil (ago).
D6 Virgin Fuel Oil.
Hsd Diesel High Speed 500ppm En90.
Diesel En590 Euro4 Gost 52368.
Pms Premium Motor Spirit
Jp54 (ts1) Gost 10227-86.
Jet Fuel A1 Gost 10227-86.
Marine Fuel Oil Cst 180-280-380.
Espo (siberia Pacific Oil) Crude Oil Api 34,7.
Lco (light Cycle Oil).
Mazut Mt100 Gost 10585-75 And 10585-99.
Rebco Gost 51 858-2002/9965-76 Api32/crude Oil 39-1623-93.
Lpg 50/50 Propane/butane - 70/30 P/b.
Lng 5542-87 By Iso Containers Etc.
Gasoline All Types (87-89-92-95).
Bitumen/asphalt All Grades.
Fertilizers Urea, Dap, Etc
Product Description :
Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. ... These fuels include or can be blended to give gasoline, jet fuel, diesel fuel, heating oil, and heavier fuel oils..
Price of product ( USD price or FOB price) :
20.000 MT monthly market price.
100.000 MT monthly market price Less 5%.
Product origin : Russia and Non Russia
Key Specifications/Special Features :
All types/grades of Fuels, Gas, Oil are available for supply.
Many commercial names for oils, fuels, gases, etc. are used in the market.
To avoid misunderstanding basic details of specifications needed by buyer are mandatory.
Specifications for types/grades of products (special grade needed by buyer) will be issued after received your credible purchase request in the form LOI/ICPO docs.
Minimum Order Size and Packgaing details :
Bulk in tanker vessels.
Tanks 20 MT.
Drilling and civil engineering bentonite is made by API and OCMA standardIt can be used as low solid phase mud in under ground civil engineering and drilling field
Â
The specifications
Item Mud  yieldM3T Filter  loss ML30min Yield  1b100ft2 Moisture  Wet Sieve Analysis0074mm gel strength
Coffee Kapal Api Special is original from Indonesia. Ready in variants size there are:
- 20 X 10 X 6 gr
- 10 X 10 X 30 gr
- 50 X 60 gr
- 20 X 160 gr
- 9 X 380 gr
Meets the requirements of:
BMW LL-04
GM DEXOS 2
RN0700/0710
MB 229.51/31/226.5
Specifications:
API SN/CF
ACEA C2/C3
TECHNOL PLATINUM 5W-30 is a new generation of Low SAPS (low content in Sulphated Ash, Phosphorus, and Sulphur) engine oil specifically formulated to meet the technical requirements of gasoline and diesel engines of new vehicle models. Its Low SAPS technology makes it the lubricant of choice for optimal operation of engines of the latest generation, equipped with anti-pollutant devices. This engine oil ensures the optimal functioning of three-way catalytic converters and particulate filters and compliance with performance levels declared by vehicle manufacturers, and Euro V environmental standards. Its excellent resistance to temperature variations guarantees the longevity of engine parts and optimal performance under all circumstances.
766 Ipol Durasynth Api Sn Cf 5W 30 Suppliers
Short on time? Let Ipol Durasynth Api Sn Cf 5W 30 sellers contact you.
TECHNOL HYBRID 5W-30 is a fully synthetic engine oil specifically formulated for use in hybrid vehicles. This engine oil delivers outstanding fuel economy and performance under most demanding operating conditions, thanks to its high quality base oils and additives. It possesses anticorrosion, antioxidant, and antifoaming properties and contains detergents and dispersants that keep the engine clean and preserve its power. Its very stable viscosity index ensures excellent lubrication of the moving components of the engine and protects it against wear and tear at low and high temperatures all year round.
DESCRIPTION:
IMPULSE-V 5W-30 is semi-synthetic engine oil is designed to meet the core requirements of ACEA and API for passenger cars. It offers complete protection of both the aftertreatment system and the engine, regardless the driving conditions. This product may not be available in your region. Please, consult your local sales contact for more information.
APPLICATIONS:
Formulated to meet recent OEM specifications. It can be used to service a wide range of EURO 4 and EURO 5 engines of different manufacturers, with or without diesel particulate filter.
KEY FEATURES:
Broad coverage reduced lubricant costs.
Significant friction reduction improved fuel efficiency and lowered emissions.
SPECIFICATIONS:
Meets and exceeds: ACEA C2/C3, API SN/CF, MB 229.31.
CASHEW NUTS
HS Code 08011910
PRICE = US$ 1,700 CIF
ORIGIN: SOUTH AFRICA
PACKING: Â (i). 45-50kg of polypropylene bag
 (ii).  80-90kg of jute bag
DESCRIPTION
It is a kidney- or heart-shaped achene, in any normal variety. Its color varies from bottle green to grayish brown (dried fruit). It is attached to the end of a fleshy footstalk or peduncle, which is in fact the receptacle of the flower, that is, broadened and swollen, and forms the false fruit.
DESCRIPTION:
IMPULSE-V 5W-40 is a semi-synthetic lubricant based on carefully selected very high quality base oils and additives of the latest generation, specially designed to meet the strict requirements of manufacturers. These provide an excellent fluidity at low temperatures, a very low resistance when starting, an exceptional viscosity index and a very high thermal stability.
APPLICATIONS:
This oil is used in gasoline engines of cars, which meet the highest performance, and diesel engines of passenger cars with turbo and direct fuel injection. The high quality allows extended drain intervals, according to the specific requirements of manufacturers.
KEY FEATURES:
Total engine protection outstanding engine cleanliness and durability.
Cold start excellent fluidity at low temperature.
Drain interval extension longer oil drain interval.
SPECIFICATIONS:
Meets and exceeds: ACEA A3/B4, API SN, API CF, BMW LONGLIFE-01, FIAT 9.55535-H2, FIAT 9.55535--M2, FIAT 9.55535-Z2, MB 226.5, MB 229.3, OPEL GM-LL-A-025, OPEL GM-LL-B-025, PORSCHE A40- PSA B71 2296, RENAULT RN 0700, RENAULT RN 0710, VW 502 00, VW 505 00.
Items Standard
DESCRIPTION TOMATO PASTE 28-30%HB
INGREDIENTS 100% FRESH RIPE TOMATO
BRIX 28.80%
LYCOPENE 62.04MG/100G
A/B VALUE 2.09
PH 4.39
HOWARD MOULD COUNT 24%
BOSTWICK (AT BRIX 12.5%) 3.9CM/30SEC
PROCESSING MATHOD HOT BREAK
FOREIGN MATERIAL FREE FROM PITS, STEMS, SKIN, DIRT OR OTHER MATERIAL
SN <100MG/KG
PB <0.1MG/KG
CU <10MG/KG
AS <0.5MG/KG
FLAVOR AND TASTE NO ABNORMAL TASTE OR ODOR
MICROORGANISM COMPLYING WITH THE COMMERCIAL STERILIZATION
Specifications: main content Re 99.99% (calculated by subtraction method, excluding gas elements)
Application: Rhenium element standard sample; Rhenium element additive for various superalloys; Base material for various rhenium components; 3D printing and others
Other trace metal impurity , analysis method: ICP-MS Gas element (â?¤, analysis method: LECO
Na
0.0005%
Ti
0.0001%
Cu
0.0001%
Sb
0.0001%
Mg
0.0001%
V
0.0001%
Zn
0.0001%
Ta
0.0001%
Al
0.0005%
Cr
0.0005%
As
0.0001%
W
0.0005%
Si
0.0005%
Mn
0.0001%
Zr
0.0001%
Pb
0.0001%
P
0.0005%
Fe
0.0008%
Mo
0.0010%
Bi
0.0001%
K
0.0005%
Co
0.0001%
Cd
0.0001%
Se
0.0001%
Ca
0.0005%
Ni
0.0001%
Sn
0.0001%
Tl
0.0001%
O
0.01%
C
0.002%
N
0.001%
H
0.005%
Applications
1. It is used to make heat-resistant and corrosion-resistant alloy.
2.Used for making high temperature thermocouple, special filament and catalyst in organic synthesis industry.
We odder top quality tomato paste made from 100% natural fresh tomatoes.
Product Description
Specification of our production:
Key attributes:
Other attributes
Product Name: Tomato Paste
Place of Origin South Africa
Storage Type normal temperature
Specification 36-38% or 28-30%
Shelf Life 24 Months
Primary Ingredients: Natural Tomato
Content tomato paste
Instruction for use raw material for small package tomato product
Brix (%) 36-38% & 28-30%
Other Ingredient: Water
Taste original taste
Weight (kg) 240 kg
Additives None
Packaging Drum
Product Type Sauce
Type Ketchup
Form Pasty
Taste sour and sweet
Color: Red
Product function: Cooking
Storage: Cool and dry place, open bag should be refrigerated
Product use: home, kitchen
Other info of production:
microbe: accord to the commercial sterile requirements
heavy metals mg/kg: sn<200, cu<10, pb<1, as<0.5
Packaging: Sachet, Cans, Antiseptic Bags, And Drums
packing: 1.in 220 liter aseptic bags in iron drums with net weight 235-245kgs each, four drums in one pallet.
2.in 1000 liter aseptic bags in bins with net weight about 1300kgs
ETRO 4+ is a high quality Group III+ base oil, manufactured from a unique feedstock by using a proprietary hydro-treatment - and wax isomerization process and hydrofinished to a colourless liquid. The base oil is highly isoparaffinic and exhibits a very high viscosity index as well as superior low-temperature performance. It has an excellent viscosity-volatility relationship.
Applications:
ETRO 4+ is the preferred choice for formulating cost effective, high-performance, low-viscosity engine oils due to its superb viscometrics and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines.
Features and Benefits:
Very high viscosity index
Excellent volatility for low-viscosity engine oils
Superior low-temperature performance
Good oxidation stability
Formulation Support:
ETRO 4+ is supported with top-tier engine oil formulations that meet the requirements for:
API SN
ILSAC GF-5
ACEA 2012*
OEM Specifications
ETRO 6+ is a high quality Group III+ base oil, manufactured from a unique feedstock by using a proprietary hydrotreatment and wax isomerization process and is hydrofinished to a colourless liquid. The base oil is highly isoparaffinic and exhibits a very high viscosity index as well as superior low temperature performance. It has an excellent viscosity-volatility relationship.
Applications:
ETRO 6+ is an excellent choice for formulating cost effective, high performance, low-viscosity
engine oils due to its superb viscometrics and low volatility. This base oil is also suitable for
application in industrial equipment, such as compressors, hydraulic systems, gears and turbines.
Features and Benefits:
Very high viscosity index
Excellent volatility for low viscosity engine oils
Superior low temperature performance
Good oxidation stability
Formulation Support:
ETRO 6+ is supported with top-tier engine oil formulations that meet the requirements for:
API SN
ILSAC GF-5
ACEA 2012*
OEM Specifications
Product Details:
Usage/Application Industrial
Type Lap Joint Flanges
Size 1-5 inch, 0-1 inch, 20-30 inch, 5-10 inch, 10-20 inch
Material Standard ASTM A182, ANSI B16.5, ASTM A351, ASTM A105
Rated Pressure (Bar) 2500
I Deal In New Only
Material Stainless Steel
Country of Origin Made in India
We can offer vide range of Lap Joint Flanges from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. Various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Fittings, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc.
Specifications: Can offer Lap Joint Flanges as cast, forged, normalized, annealed, quenched (hardened) tempered condition with black or bright (proof machined) finish.
Various type of IBR approved Flanges that can be procured are as follows: Blind, Slp-On, Welding Neck (Weldneck), Long Welding Neck (LWN), Socket Weld, Lap Joint, Threaded, Spectacle Blind, Plate, Collar, Flat Face, Raised Face, Ring Type Joint, etc.
Size range of flanges that can be offered are �½â?? inch upto 60â?? inch depending on type, class grade of flanges.
Class of flanges: #150, #300, #400, #600, #900, #1500, #2500
