This is a DC voltage and current transducer. The operating principle is Photoelectric Isolation/Treble isolation. It can measure DC voltage and DC current at the same time, and has two channels of standard signal. The input, output and power supply are isolated from each other. It's featured in high accuracy, high isolation, low drift and so on. This product can be used in railway, industry control, and other fields.
Rated input: 0~1-500V; 0~0.5-5A
Output signal: 0~5V DC (Vz); 0~20mA (Iz); 4~20mA (Iy);0~10V DC (Vd);OC frequency output:(0-5KHz/0-10KHz) optional
Power supply: 12V;15V; 24V; optional
Accuracy: 0.5% optional
Output ripple: 10mV
Isolation: 2500V DC
Humidity: â?¤95%(no dew)
Load resistance: Voltage Output >2kohm; Current Outputâ?¤250ohm
Input Voltage 12V / 24V DC optional
Output Voltage 115V / 230V AC optional
Portable power for AC products, AC outlets for connecting multiple loads
High surge capacity for products that require more power to start
High efficiency converts virtually all of the battery's power to AC
Mounting brackets for convenient installation
Heavy duty stud-connection mounting
RS232 communication port
WIFI/BMS Optional
Overload and over temperature shut down
Low voltage and over voltage alarm/cut off
Input reverse protection
Short circuit protection
PI15 series is a pure sine wave inverter, high frequency machine solution, the product is small size, the solution is reliable and stable, the main function is to invert the DC 12VDC battery or 24VDC battery to AC 230VAC or AC 115VAC output, mainly used for emergency use Electricity, car inverter,
outdoor electricity and other occasions.
New designed High Speed fruit slice machine,can slice lemon,orange,apple,pear,kiwi ... same this kind oval and round fruit vegetable can process
Parameters :
External dimensions: 2800 * 1200 * 1250 mm
Input voltage: 220 V
Total power: 3 kw
Production: 90-120 pcs/min
Total weight: 340 kg
Health fruit slice for people eating, good business ! welcome cooperate! contact us
fruit slicer machine
lemon slice machine
Different capacity drying noodle making machine ,fresh noodle making machine long noodle making machine paste Italy noodle spaghetti making machine :
Name Model & Parameters Qty set Note
Automatic Hang Noodle Making Machine 5-260model,
machine size 3*0.6*1.2m,
voltage 380V,3KW,
weight 440kg,
capacity 150-200kg/h 1 Attached 3pcs cutter.
100 pcs hanging noodle poles
Welcome order !
Fish seafood grading sorting weighting machine,Parameters Exclusion method Pneumatic swing arm
Working height 800mm �?�±50mm
working voltage AC220V 50HZ
Total rated power of sorting machine 1kw/hour
Delivery direction Facing the operation interface from left to right
working temperature From -20 C to 40 C
Scale size 630MM (optional size according to the divided object)
Shaving and discharging direction customization.
9137 Gz01 Multi Parameter Dc Voltage Transducer Suppliers
Short on time? Let Gz01 Multi Parameter Dc Voltage Transducer sellers contact you.
Stick ice lollipop ice filling sealing machine
The automatic stick ice filling -sealing machine for lollipop ice is small in size and light in weight, and is made of stainless steel. This machine can produce various beverages such as lollipop ice, milk sticks, fruit milk, fruit cold drinks, and so on. from small capacity to big capacity .
Product parameters of one :
Voltage: 220/50 (V/Hz)
Power: 0.75KW
Sealing speed: 2000 cups/hour
Filling capacity 0-150ml
Specification: 960 * 430 * 330mm
(Welcome give thumbs-up, comment,transmit)
welcome order !
Automatic cylinder turnover dough mixing machine for various kind bakery food /wheaten food and so on same this kind food ,
During operation, the hook and hopper rotate at the same time to make the dough more uniform, the bucket can be automatically turned over and removed, and the mixing head can be lifted, which is convenient for fetching and cleaning. It is equipped with a head up emergency stop device to ensure safe use. Castors/foot-wheel are installed at the bottom for easy movement.
Mixing hook ,cylinder ,safety cover all by SUS material .
Parameters :
50kg/ 75kg / 100kg / 125 kg/time
power 7.75-14.25kw
voltage 380v/50hz
1380 * 1160 *1400mm / 1580 *1380*1560 /1650 *1500 *1630 /1680*1550*1650mm
Bread dough mixing machine
How to making dough
Delicious bread dough
Semi automatic saw bone meat machine With fine-tuning, bone meat cutting machine
Main features :
1.You can choose to use a single saw or a double saw for product stability,
or a single saw for unstable products .
2.Ensure the hygiene of the meat and ensure a smooth cutting surface
3.Waterproof design for quick cleaning
4.According to dfferent uses ,froze meat ,lamb chops, steak ,fish
5.Adopting human-machine interface and intelligent operation panel
6.30 sets of memory functions can be set
7.Feeding adopts servo motor ,with high precision
8.The conveyor belt can be removed for cleaning paramters :
cutting thickness: 1-50mm, Material thickness under 15cm .Capacity 8-15times/min
Parameters :
Voltage: 380V
Power: 1.5KW
Operating speed: 1500m/min
Saw blade length: 2000mm
Cutting ruler: 300 * 220mm
Workbench size: 657 * 525mm
Machine size: 800 * 600 * 1520mm
Machine weight: 80kg
Fully automatic reciprocating double-sided saw bone machine,fully automatic bone cutting machine
Main features :
1.You can choose to use a single saw or a double saw for product stability,
or a single saw for unstable products .
2.Ensure the hygiene of the meat and ensure a smooth cutting surface
3.Waterproof design for quick cleaning
4.According to dfferent uses ,froze meat ,lamb chops, steak ,fish
5.Adopting human-machine interface and intelligent operation panel
6.30 sets of memory functions can be set
7.Feeding adopts servo motor ,with high precision
8.The conveyor belt can be removed for cleaning paramters :
cutting thickness: 1-50mm, Material thickness under 15cm .Capacity 8-15times/min
Parameters:
Reciprocating double-sided saw
Machine size 1620*1550*1720mm
Working table size 500 *600mm
By height 300mm
Dimensional accuracy: ±1mm
Maximum cutting height: 300mm
Sawblade line speed: 44m/s
Saw blade specification: 3250mm
Voltage: 380V/50HZ
Power: 3.95kw
Air pressure: 0.8MPa
Machine weight: 500kg
Factory Automatic Hot Eye Onion peeling process machine,from small capacity to big capacity
Onion peeling process: the onion is manually fed into the hopper --- the conveyor belt automatically feeds the onion into the peeling box for peeling --- after peeling, the onion goes into the peeling roller. Under the action of high-pressure air at the side, the first and second layers of the onion are peeled off and sent out to complete the whole processing process.
Features: 1. Advanced technology, reasonable mechanism, beautiful appearance, safe and reliable use, all stainless steel. 2. Automatic peeling without damage. 3. The depth of peeling is even. 4. The feeding belt is used for automatic feeding, which is simple in design and convenient in use. 5. Less peeling, high recovery rate of finished products, and over 98% of finished products. 6. Mechanical processing eliminates the hidden danger of manual processing of infectious diseases and unsanitary products.
Parameters
1.process arrange diameter of round shape onion 30-150mm.
2.capacity 1000-1500kg/h
3.Power 3kw
4.Voltage 380V
5.Air Compressor :flow 1.5m2/min, pressure 0.7MPa ,power 11kw
6.Machine size 1.5*1.3*1.4m
7.Weight 420kg
Start working flowing:
1.Fill onion in the loading box
2.Start the pneumatic valve switch
3.Start the power-supply switch
4.According to onion drying or fresh to adjust loading speed button/air pressure ,in order to ensure the clean degree of removing onion skin
5.When finished adjusting ,The equipment operates normally and automatically.
GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and
high security power services.
Safe and reliable
High quality li-ion cell for mobile use
Laser welding connection with high strength and low impedance
Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation
Damping pad design to improve the impact resistance of the system
IP54 safe and reliable operation in outdoor environment
Serially designed PCS and battery pack eliminates circulating current and improve system reliability.
Integrated BMS,DC, AC multi-layer protection, maximum safety performance design
Efficient and Convenient
Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion
Easy access to PV and diesel generator, intelligent muli-energy management.
Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring
Multi systems could be connected in parallel
Cost optimization
One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc.
Small size, light weight, less space and installation cost
Long cycle life, low failure rate, reduce operation and maintenance investment
Maximize green energy utilization.
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
The one element DC multi-parameter digital transducer is used for measuring DC current, voltage and power parameters.Its inputs are DC current (output of mating transducer) and DC voltage, and its outputs are digital data of the DC current, voltage and power through RS-485 interface. It can be applied to various measuring and controlling systems such as communication, power grid and electrization railway etc.
Function & Feature
1. Isolate the DC voltage input signal from the DC Output signal, which is directly proportional to the input
signal.
2. These isolators can be used to prevent earth loops, which occur when a measuring source
3. Excellent temperature characteristic and good working stability.
4. It have an advantage over loop powered units, in that if for any reason the output lead should become
disconnected, the input will not be saturated.
5. Fixed in a standard 35mm DIN rail or screwed on the cabinet.
Function & Feature
1. Isolate the DC voltage input signal from the DC Output signal, which is directly proportional to the input
signal.
2. These isolators can be used to prevent earth loops, which occur when a measuring source
3. Excellent temperature characteristic and good working stability.
4. It have an advantage over loop powered units, in that if for any reason the output lead should become
disconnected, the input will not be saturated.
5. Fixed in a standard 35mm DIN rail or screwed on the cabinet.
Specifications
Inputs:
System input 0~5V, 0~30V, 0~60V, 0~300V, 0~400V
Absorbed power 0.1VA
Output:
Standard nominal outputs 4~20mA, 0-5V,
(others on request) 0-20mA,
5-10V
0-10V
Respones time
Function & Feature
1. Isolate the DC voltage input signal from the DC Output signal, which is directly proportional to the input
signal.
2. These isolators can be used to prevent earth loops, which occur when a measuring source
3. Excellent temperature characteristic and good working stability.
4. It have an advantage over loop powered units, in that if for any reason the output lead should become
disconnected, the input will not be saturated.
5. Fixed in a standard 35mm DIN rail or screwed on the cabinet.
6. Ultra-thin dimension, suitable for limited space, the control cabinet.
Function & Feature
1. Isolate the DC voltage input signal from the DC Output signal, which is directly proportional to the input
signal.
2. These isolators can be used to prevent earth loops, which occur when a measuring source
3. Excellent temperature characteristic and good working stability.
4. It have an advantage over loop powered units, in that if for any reason the output lead should become
disconnected, the input will not be saturated.
5. Fixed in a standard 35mm DIN rail or screwed on the cabinet.
6. Ultra-thin dimension, suitable for limited space, the control cabinet.
Specifications
Inputs:
System input 0~5V, 0~30V, 0~60V, 0~300V, 0~400V
Absorbed power 0.1VA
Output:
Standard nominal outputs 4~20mA, 0-5V,
(others on request) 0-20mA,
5-10V
0-10V
Respones time
9137 Gz01 Multi Parameter Dc Voltage Transducer Suppliers
Short on time? Let Gz01 Multi Parameter Dc Voltage Transducer sellers contact you.
