GVE-Tplus(E1/G.703 to V.35 Ehernet converter
Detaile Selling Lead Description
Features:
1) GVE-T plus can convert E1 to both V.35 interface and LAN interface
2) Bandwidth of every port can be set into N x 64kbps (N=1-31) continuous data stream, although the total bandwidth of the two ports must be no more than 31 and must be inserted into PCM time slot of E1. It supports choices of CRC4 on/off and CAS/CCS (30 & 31 time slot)
3) GVE-T plus also can distribute the whole E1 capacity to V.35 data interface, although E1 must be framed N x 64kbps (N=1-31). The work mode can be either internal clock and slave-clock, or N x 64kbps (N=1-31) external clock to achieve end- linking line
4) GVE-T plus can be set up into long-range Ethernet Bridge from V.35 to LAN interface
5) GVE-T plus has two transmission modes to choose from: data and image
6) GVE-T plus has local and remote loop backs. Therefore user can use circuitry-test and malfunction diagnosis conveniently to perform port-to-port integrity test
Detailed Product Description
Ethernet features:
1) LAN table: 10,000 automatic learning and updating
2) Filtering and forwarding: 30,000 frames / second
3) Buffer size: 64M
4) Throughput delay: 1 frame
5) VLAN: comply with 802.1Q
LAN feature:
1) Standard: conforms to IEE802.3 / Ethernet
2) Work mode: full duplex / half duplex
3) Data rate: 10Mbps
4) Physical interface: 10 BaseT (UTP), shielded RJ-45
5) WAN E1 / G.703 feature:
6) Line transmission rate: N 64Kbps (N=1-31) 2048Kbps
7) Line coding options: HDB3
8) Format of line frame: G.703 (framed / unframed)
9) Line interface: BNC; RJ45
Transmission features:
1) Comply with G.703
2) Rate of data transmission: N 64Kbps (N=1-31)
3) Transmission mode: synchronization
4) Data interface: V.35 or V.24 / RS232C DCE
5) Clock: master clock; slave clock; external clock
6) Testing methods: local analogy loopback test; remote digital loopback test
Feature:
1) Power supply: 220VACf+10%, 50Hz 48V DC (optional)
2) Power consumption: 5W
3) Volume: 225 x 145 x 40mm; 9" (L) x 5.8" (W) x 1.6" (H)
4) Temperature: 0 - 40fpC
Gve(e1, g.703 to v.35, v.24 converter)
Detailed selling lead description
Features:
1) v-gve is an asic-based converter using one e1/g.703 to convert to v.35
2) can convert successive n x 64k (n=1-32) data stream into pcm signal of e1, the data rate is up to 2048kbps
3) placed in e1 frame, data user just needs necessary timeslot
4) setting timeslot is continuous and according to rate of data port
5) the data ports have v.35 and v.24/rs232c which are optional
6) the ports support external clock and become linking end line
7) v-gve satisfies the requirements of g.703, g.704&g.706 of itu
8) v-gve has local and remote loop backs. Therefore user can use circuitry-test and malfunction diagnose conveniently
Detailed product description
Features:
1) rate of data transition: n x 64kbps (n=1-31), 2, 048kbps
2) transmission mode: synchronization
3) line interface: impedance 75 ohm, physical interface bnc; impedance 120 ohm, physical interface rj45
4) transmission features: comply with g.703
5) clock: line; external
6) testing method: local analogy loopback, remote digital loopback
7) dce interface: v.35 or v.24/rs232c
8) power supply: 220v f+ 10%, 50hz; 48v dc (optional)
9) power consumption: 5w
10) volume (l x w x h): 225 x 145 x 40mm; 9" x 5.8" x 1.6"
11) temperature: 0 - 40fpc
12) humidity: 0~95%
GVE-Tplus is an upgrade of GVE-T. It is based on the ASIC circuitry design technology. It is a multi-functional, multi-purpose E1/G.703 to V.35 and LAN three-in-one multiplexer, which is also knowns as the three-in-one interface converter.
GVE-Tplus can not only be set up into GVE-T, but also can distribute the whole E1 capacity to V.35 data interface, although E1 must be framed N*64Kbps(N=1--31). The work mode can be either internal clock and slave-clock, or N*64Kbps(N=1--31) external clock to achieve end-linking line.
GVE-Tplus can be set up into long-range Ethernet bridge from V.35 to LAN interface. With low cost, it is suitable for use in bridge connection which is sensitive to cost or use in LAN as a stretcher or subsection. It can learn automatically MAC address in the connected LAN and only transmit the aim address to frame in another LAN. There are more than 10000 addresses in its LAN table. And they can be updated automatically. The highest speed of filtrating and transmission is 30000 frame/second(line speed). The buffer size is 64M. The throughput delay is 1 frame. When it is used as a stretcher or subsection, it can forbid filtration so that all traffic can be broadcasted in WAN. 10baseT interface can run in full duplex Ethernet with topology and improve data throughput by eliminating filled blanks in the 64 bytes frames. Without any negotiation in V.35 port, it is specially suitable for use in satellites and other wireless broadcast.
GVE-Tplus is E1 to V.35/V.24/RS232 and Ethernet Converter. Other series interface RS449/RS530/X.21 also can be optional. E1 port can support BNC/75ohm and RJ45/120ohm optional.
This device provides an economical digital access solution for E1 and fractional E1 network services. With a adapter cable, the device can connect to other DTE device, such as router, at data rates of 64Kbps to 2048Kbps.User data is placed into the E1 frame, using only the required number of timeslots, timeslot assignment is accomplished according to the data port speed and manual setting of DIP switches. The V.35 or V.24/RS232 and Ethernet share the 2Mbps bandwidth, the total bandwidth of the 2 interfaces must be not more than 1984Kbps.GVE-Tplus is widely used in communication network, both in WAN and LAN connection field.
Features:
*Comply with ITU V.35, G.703, G.704, G.706, G.823
*Full comply with IEEE 802.3 /IEEE 802.1Q (VLAN)
*Framed (N*64Kbps) and unframed (2.048Mbps) optional
*Ethernet port 10Mbps, Full/Half Duplex mode compatible
*Frame mode support PCM30/PCM31
*Support CRC4
*Support internal clock, E1 recovery clock or V.35 line clock
*Provide analog and digital loopback and remote digital loopback test
*For E1 interface, 75ohm (unbalanced) and 120ohm (balanced) optional
*For data interface, V.35 and V.24/RS232 optional
*Comprehensive LED indicators on front panel, convenient for the diagnosis of equipment working state
*Stand-Alone and Rack-Mount available
*16-slots, elaborate cooling design and two redundant power supplies
*Support management
*-48V DC & 220V AC power supply optional
Specifications:
E1 & FE1 interface
Comply with ITU G.703,G.704,G.706,G.823
Rate:2.048Mbps;N*64Kbps(N=1~31)
Code type:HDB3
Impedance:75ohm unbalanced & 120ohm balanced optional
Physical interface:BNC coaxical for unbalanced
RJ45 twisted pair for balanced
V.35,V.24/RS232 interface
Comply with V.35,V.24/RS232 standard
Rate:2048Kbps;N*64Kbps(N=1~31)
Transmission mode:Synchronization
Data interface:V.35 or V.24/RS232
Physical interface:DB25 female jack,V.35 via external adapter
Work mode:DCE
Power supply
AC power:220V¡¨¤10%,50Hz
DC power:-48V(optional)
Power:5W
- Big data analysis and management through AI cloud server
- The device for acquring health information and having multi-function portable thermometer that can provide visual information
- Obtained certificate of New Excellent Technology(NET)
SPECIFICATION:
- USB Type : UVC V 1.1
- Support USB Connector Basic : USB Micro-B (USB Converter : USB-C, USB-A)
- USB Support OS : Android 4.0 and later, Windows(7,8,10)
- Camera Button Functions : Remote : Start, Mode Change, Still Image Capture, Measurement, Result
- Out Dimension : [30(W)X212(L) (With Bebe-TMC)]
- Weight : About 87 g (With Bebe-TMC)]
- Operating Humidity - 5 - 85 percentage
- Wi-Fi Type (with ARH-WM) : Wi-Fi : Wireless LAN IEEE 802.11 b/g/n
- Battery : Polymer Li-ion [3.7 V, 700 mAh]
- Wi-Fi Support OS: Android 4.0 and later, iOS 7.0 and later, Windows(7,8,10),MAC OS
193 Gve Tplus(E1 G 703 To V 35 Ehernet Converter Suppliers
Short on time? Let Gve Tplus(E1 G 703 To V 35 Ehernet Converter sellers contact you.
V-rebplus is a 10/100m, self-adaptive, high performance, self-learning, remote ethernet bridge. Its low cost make it suitable for cost-sensitive bridging application or as a lan extender or subsection. When it is used as a extender or subsection, it can forbid filtrating to let all of the amount of traffic are transmitted in wan. Its 10 base-t interface can run in full duplex ethernet with topology and improve data throughput by eliminating the padding bit in 64 bytes frame. Variable speed up to 10mbps on the wan line is supported transparently. The line rate may be adjusted in running without any influence to v-rebplus. V-reb plus does not perform any negotiation over the link, which is specially suitable for satellites and other wireless broadcast applications.
Features:
*10/100m high fast powered self-adapting self-educated long-range ethernet bridge.
* lan according with: ieee802.3/ieee802.3u/ethernet interface: utp(rj45)
* wan interface: v.24/rs232 & v.35 optional
* wan line speed rate reaches up to 10mbps.
* speed of filtrating and transmitting is up to 30000 frame/ second. Buffer is 16m.
* it can store up to10000 mac. And mac addresses have functions of automatically learning and updating.
* ethernet utp interface has function of vlan802.1q. There have two transmitting mode to choose: data and image.
* automatically learn mac addresses on the lan to which it is connected, and forward only those frames destined for another lan.
Product Description
The E1 to Ethernet protocol Converter is a device that extends Ethernet by means of telecommunication lines (E1 or E1 transport network, such as PDH, SDH, or microwave, etc.) and is also referred to "Net Bridge".It can effectively utilize free bandwidth of telecom operators' lines and can be used instantly once it is deployed, with little increased investment.
Technology Characteristics
-> Transparent transmission of Ethernet data through E1 lines at 2048Kbps bandwidth
-> Plug and play, without any setting or debugging work
-> Support automatic negotiation feature in Ethernet and full duplex/half duplex mode
-> Support transmission of Jumbo Frames specified in IEEE 802.1Q and Ethernet switches with VLAN capability
-> Local data frame filtering
-> Provide unbalanced 75ª+ and balanced 120ª+ E1 interfaces
E1 Interface:
-> Support ITU-T G.703
-> HDB3 line coding, comply indication output of route warn
-> Coding rate : 2048Kbpsí+50ppm
-> 75ª+ physics interface use BNC standard coaxial connector, 120ª+ physics interface use RJ45 connector
Ethernet Interface:
-> Fully IEEE 802.3 (2000) compliant
-> Bit rate: 10Mbps or 100Mbps
-> Interface type: RJ45
General characteristics
-> Power : 220Ví+20% , -36 ~ -72V
-> Power Consumption : < 5W
-> Environment Temperature : 0íµ-50íµ
-> Size : 220í-175í-35mm
-> Net Weight : 900g
Packing List
-> V.35/Ethernet Protocol Converter
-> One Power cord (Note : -48v no with power cord)
-> Two BNCs Coaxial Connector
-> Manual book
Detailed selling lead description
Features:
1) msdsl is fpga-based 2-wire 2304kbps modem
2) according with itu g.Shdsl standard, with best concocting technology and very good frequency spectrum compatibility
3) has 3.5 - 9.7km transmission distance in special lines with 24awg (0.5mm) and 26 awg (0.4mm)
4) can be used in every high-grade and high-speed telecoms operation such as transmitting voice, data and images
5) also supports n x 64kbps rate (n=1~32) of interface of v.35, e1(g.703) and ethernet.
Msdsl has strong supervisory control function
Detailed product description
Features:
1) line interface
2) fully conforms to standard of ydn 056-1997
3) transmission rate: n x 64kbps + 8kbps (n=3~36)
4) code: pam16
5) line impedance: 135 ohm
6) signal electrical level: +13.5 +/- 0.5 dbm
7) line wire interface: a pair of passive twisted-line, rj45
8) code error rate: f_10 - 9
9) transmission distance without linkup: 3.5~9.7km (0.4~0.8mm wire size)
10) data interface 1 (e1 interface) feature
11) transmission rate: n x 64kbps (n=1~32)
12) line coding: hdb3
13) line impedance: 75 ohm/120 ohm
14) interface standard: conforms to ccitt g.703 standard
15) data interface: (v.35 / v.24)
16) transmission rate: n x 64kbps (n=3~36); v24 (64k; 128k)
17) work mode: dce
18) work circumstances
1) power supply: 220vacf+10%, 50hz; 48v dc (optional)
2) power consumption: <5w
3) dimensions (l x w x h): 225mm x 145mm x 40mm (9" x 5.8" x 1.6")
4) temperature: 0 ~ +40fpc
5) relative humidity: 0 ~ 95%
Product Description
industrial washing machine is suitable for washing cotton, wool, chemical fiber, silk fabrics and other clothing. Watermill washing machine can be used for garment factory washed jeans and silk clothing. The washing equipment for hotels, restaurants, hospitals, schools, factories, and other fields to meet the requirements of large capacity laundry.
Technical Details
Model: 45.12.2.200419a
Rated Capacity: 35 Kg
Drum Diameter: 900 mm
Diameter Depth: 512 mm
Washing Speed: 40 rpm
Power Supply: 380 V / 3 Phase / 50 Hz
Motor Power: 1.5 Kw
Heating Type: Steam Heating
Steam Pipe Diameter: G3/4" Inch
Steam Pressure: 0.3-0.6 Mpa
Cool / Hot Water Pipe: G 1/4" Inch
Tap Water Pressure: 0.2 - 0.4 Mpa
Drainage: G2" Inch
Noise: 78
Machine Weight: 500 Kg
Dimension (WxDxH): 1180*1280*1520
Model: 45.12.2.200419b
Rated Capacity: 50 Kg
Drum Diameter: 960 mm
Diameter Depth: 641 mm
Washing Speed: 35 rpm
Power Supply: 380 V / 3 Phase / 50 Hz
Motor Power: 1.5 Kw
Heating Type: Steam Heating
Steam Pipe Diameter: G3/4" Inch
Steam Pressure: 0.3-0.6 Mpa
Cool / Hot Water Pipe: G 1/4" Inch
Tap Water Pressure: 0.2 - 0.4 Mpa
Drainage: G2" Inch
Noise: 78
Machine Weight: 700 Kg
Dimension (WxDxH): 1270*1440*1600
Model: 45.12.2.200419c
Rated Capacity: 70 Kg
Drum Diameter: 1200 mm
Diameter Depth: 620 mm
Washing Speed: 32 rpm
Power Supply: 380 V / 3 Phase / 50 Hz
Motor Power: 2.2 Kw
Heating Type: Steam Heating
Steam Pipe Diameter: G 1.5" Inch
Steam Pressure: 0.3-0.6 Mpa
Cool / Hot Water Pipe: G 1/2" Inch
Tap Water Pressure: 0.2 - 0.4 Mpa
Drainage: G2" Inch
Noise: 78
Machine Weight: 1000 Kg
Dimension (WxDxH): 1528*1515*1860
Model: 45.12.2.200419d
Rated Capacity: 100 Kg
Drum Diameter: 1300 mm
Diameter Depth: 756 mm
Washing Speed: 32 rpm
Power Supply: 380 V / 3 Phase / 50 Hz
Motor Power: 4 Kw
Heating Type: Steam Heating
Steam Pipe Diameter: G1/2" Inch
Steam Pressure: 0.3-0.6 Mpa
Cool / Hot Water Pipe: G 1.5" Inch
Tap Water Pressure: 0.2 - 0.4 Mpa
Drainage: G3" Inch
Noise: 78
Machine Weight: 1400 Kg
Dimension (WxDxH): 1740*1825*1820
Model: 45.12.2.200419e
Rated Capacity: 150 Kg
Drum Diameter: 1440 mm
Diameter Depth: 920 mm
Washing Speed: 30 rpm
Power Supply: 380 V / 3 Phase / 50 Hz
Motor Power: 5.5 Kw
Heating Type: Steam Heating
Steam Pipe Diameter: G 1.5" Inch
Steam Pressure: 0.3-0.6 Mpa
Cool / Hot Water Pipe: G 2" Inch
Tap Water Pressure: 0.2 - 0.4 Mpa
Drainage: G3" Inch
Noise: 78
Machine Weight: 1800 Kg
Dimension (WxDxH): 1880*1984*2000
Managed Media Converter is a 10/100Base-TX auto negotiation and auto MDI/MDIX cable selection Fast Ethernet Media Converter with intelligent network management that translates transmission signals from a twisted-pair 10Base-T or 100Base-TX cable to 100Base-FX fiber optic cable. It enables network managers and network operators quickly isolate problems without visiting multiple wiring closets, avoiding expensive downtime. With its SNMP manager, user can monitor and configure the Copper Port and Optical Port of center chassis and remote standalone easily. Besides, user can control the bandwidth rate limiting as N*32Kbps.
Hardware Function
Support 10Base-T, 100Base-TX, 100Base-FX
Fully compatible with IEEE802.3, IEEE802.3u, IEEE802.3x standards
Up to 5km distance on multi mode optical port and 120km distance on single mode optical port
High-performance auto-negotiation chips make sure the data transfer with higher
Security, stability and without block.
Up to 1916 bytes package forwarded
Support half/full duplex mode Auto-negotiate
Low power consumption, low heat generation and excellent compatibility
10Watt professional communication power supply module inside the standalone.
Chassis supports double redundant power supply modules and each power supply module
Supports up to 100 Watt power output for the security and stability
Support hot-swap for all the modules, but not including management module
Single-strand/dual-strand optical module selectable, FC/SC/ST optical port slectable and standalone/16-slot chassis selectable.
Detailed selling lead description
Fme is high-speed fiber optic modem with remote configuration based on asic circuitry technology. It supports user-selectable rates between n*64kbps (n=1--31) and 2048 kbps. The fiber interface is sc (single module).Transmission distance is up to 60km. The product fully conforms to part 15 of fcc regulation.
With remote configuration, the fme rate of user terminal follows the configuration of the fme of master terminal automatically without any other setup.
Data interface of fme can be v.35/v.24/rs232 or g.703. E1 rate supports framed mode and unframed mode, which are known as n*64 kbps (n=1--31) and transparent 2048 kbps. External clock, internal clock, and slave clock are supported.
With the function of integrated diagnosis, it can perform tests of local analog loop back and remote digital loop back to achieve end-to-end integrity test.
Detailed product description
Feature:
1) fiber optic modes: 8.3/125mum, 8.7/125mum, 9/125mum, 10/125mum, single module
2) transmission distance: 0-60km
3) fiber optic interface: sc
4) length of working wave: options: 1, 310nm, 1, 550nm
5) transmitting electrical level: 0~6dbm
6) receiving sensitivity: -36dbm
7) decaying: 1, 310nm window0.4db/km, 1, 550nm window 0.25db/km
8) data interface: v.35 mode: fmve, g.703 mode: fmge
9) data rate: n*64kbps (n=1 - 31); 2, 048kbps
10) transmission mode: synchronous
11) line interface: bnc; rj45
12) transmission features: conforms to g.703
13) clock: line clock, external clock, internal clock
14) test methods: local analog loop back test and remote digital loop back test
15) dce interface v.35 or v.24/rs232c
1) power supply: 220vacf+10%, 50hz; 48vdc(optional)
2) power consumption: 5w;
3) dimension (l x w x h): 225 x 145x 40mm, 9" x 5.8" x 1.6"
4) temperature: 0 - 40fpc
5) humidity: 0~95%
8 Channel Video Converter is a fiber optic digital multiplexer for transmitting 8 channels high quality, uncompressed digital video, 4 channels of bi-directional data and audio, 4 E1 and one 100M Ethernet over single fiber cable.
Applications for this product include CCTV, video surveillance, homeland security, ITS etc.
Technology Characteristic:
Transport 8 channels of High quality video over one optical fiber cable
Exceed RS250C Medium Haul Specification for DG, DP and SNR
6.5MHz video bandwidth, Compatible with NTSC, PAL and SECAM
Uncompressed video, 8 Bit digital encoding/decoding
Transmission of 4 channels of any directional audio
Provide 4 channels of bi-dir data compatible with RS232, RS422/ RS485
Support 4 E1, G.703 standard
One 10M/100M Ethernet compatible with IEEE802.3
Easy installation and adjustment free
Transmission up to 60KM over one fiber
Interface parameters:
Indicators :
Power, Optical Link Status
Video Signal, Audio status, Data traffic
TRX E1-10/100Base-T developed by Hengguang Technologies, employs the clarity E1 transmission channel in accordance with ITU-T G.703 advice and IEEE802.3 standard with independent intellectual property. It is a kind of remote transmission equipment transmitting 10 Base-T data. With an independent structure, TRXE1-10Base-T can transmit 10Base-T data through E1 channels and extend work distance of the interface between two Ethernets through E1 channels such as optical fiber, microwave DDN nets and so on.
It can use the existing communication network structures and interfaces efficiently without impropriating optical fiber core or additional equipment.
Product Description
FE1/V.35 Protocol Converter provide conversion between ITU-T G.703 standard E1 interface and standard V.35/V.24 interface, can convert E1 channel of SDH, PDH, and other Optical Transmission Equipment or microwave, satellite Equipment to V.35/V.24 channel, Extend V.35 channel of DDN. Used widely in data communication networks, Connecting with V.35/V.24 interface of Routers and Optical Transmission Equipments without G.703 interface, realize match between different network equipments, and transparent to upper protocol layer.
Technology Characteristics
-> Bandwidth range is 64Kbps-2048Kbps Realize data of V.35 transparent transport in the E1
-> Support all kinds of loop function, for testing and opening conveniently
-> Support network function, monitor operation condition of facilities
-> Support E1 interface of unbalance 75ª+ and balance 120ª+
-> Be possession of testing function of E1
-> Support ITU-T G.703íóG.704
-> HDB3 line coding, comply indication output of route warn
-> Coding rate : 2048Kbpsí+50ppm
-> 75ª+ physics interface use BNC standard coaxial connector, 120ª+ physics interface use RJ45 connector
V.35 Interface:
-> Interface Mode : DCE
-> Interface Type : DB25
-> Rate : 64Kbps-2048Kbps
General characteristics
-> Power : 220Ví+20% , -36 ~ -72V
-> Power Consumption : < 5W
-> Environment Temperature : 0íµ-50íµ
-> Size : 220í-165í-35mm
-> Net Weight : 900g
Packing List
-> FE1/V.35 Protocol Converter
-> One Power cord (Note : -48v no with power cord)
-> Two BNCs Coaxial Connector
-> One conversion cable of DB25-M34
-> Manual book
FME-2 provides two interfaces of E1(g.703) or V.35, and the rate to every transmitting channel of E1 or V.35 can be up to 2Mbps. It was made by ASIC circuitry technology, we can also call it " PDH"
Feaures:
FME-2 is high-speed fiber optic modem with two E1/V.35 interface optional.
The two interfaces of FME-2 can be V.35 or E1 (G.703), and also one can be V.35,
another is E1 (g.703).
The data transmitting rate is from N*64K (N=1-31) to 2048 Kbps.
The clock is optional internal, external and slave.
To achieve point to point testing, FME-2 can process the diagnosis of some troubles
though the switch AL, DL and RL.
There are many indicators LEDs on the panel to display work state, such as PWR,
RXD,TXD, SYNC, TEST...
E1 (G.703) interface comply with ITU-T G.823, G.703 and G.742, it can be impedance balance120ohm (RJ45) or unbalance 75ohm (BNC)
The requirements to the fiber can be single mode/multi mode, single core/double core,
SC/FC/ST, 2km/20km/40km/60km
GPRS200 MODEM as a standard RS232c interface, result in widely extending the applicable fields of GPRS. It can be applied in the desk computer, notebook computer and other control system terminal. It has a highly frequency stability.
PRODUCT FEATURES:
Always on-lined and high-speed connection. Easily installation: Neednf+t any driving program. It can be dialed-up using RS 232 interface with common modem.
DualBand GSM/GPRS modem (EGSM900/1800MHZ,900/1900MHZ) designed for gprs Networkf=Data faxf= SMS and voice application.
Transmitting speed: 115.2K BPS (theoretical), 30f¼50K BPS (under the CHINA Mobile network) Channel spaces: 200Kpbs Stability of frequency: 0.1ppm
Operating temperature:-20ºC--+60ºC
Storage temperature: -30ºC--+85ºC
Humidity: 98% Vibration(non working): 25g. Operating power: 15mA INTERFACES RS-232C and audio through mini sub-D 9-pin
connector supporting: Remote control by AT commands(GSM07.07 And 07.05) Audio use a stereo earphone connecter antenna interface 50 ohm MMCX connecter LED indecter SMA Sliding SIM holder(3V/5V SIM interface) Antenna vonnector 6V-15V DC POWER SUPORT OPERATION SYSTEM DOS,WINDWS 9X,ME,NT,2000,XPf=LINUXf=UNIXf=POCKET PCf=MAC APPLICATION: Remote controller, Integrating system.
MUX4E1-Tplus is a kind of high-performance, self-educated long-range Ethernet bridge. With low cost, it is fit for bridge connection or LAN stretcher or subsection. MUX4E1-Tplus can learn automatically MAC address in the connected LAN and only transmit the target address to the frame of another LAN. Its 10/100BaseT interface can run in full duplex Ethernet with topology. With transparently sustaining in WAN lines, alterable speed rate will reach up to 7.936Mbps (4 lines E1). There can be one E1 line (1984Kbps); two E1 lines (3968Kbps); three E1 lines (5952Kbps); four E1 lines (7936Kbps); Transmitting speed rate of E1 line is 2048kbps (transparent channels E1, unframed).
The transmission lines of MUX4E1-Tplus must be transparent and unframed, which is specially fit for satellites and other wireless broadcast.
Features
With 4 E1 lines to transmit 2 Ethernets data, and the 2 Ethernet can work at the same time when they are in different LAN. For example, the IP of LAN1 is 192.10.10.1, the IP of LAN2 is 128.1.1.1 the two Ethernets 10/100Mbps can work at the same time by using MUX4E1-Tplus.
The maximum permitted transmission delay among the 1st E1 to the 4th E1 is 16ms (on condition to keep the frame in order), which can permit the device running stably in every kind of completed networks.
Every E1 line only occupy 64Kbps of channels spending when Ethernet data transmission. The factual available bandwidth of every E1 is 1.984Mbps.
Automatically inspecting the number of the available channels of 4 channels of E1 and automatically distributing bandwidth. It is fit for redundant and bandwidth of E1 line.
Support CRC error code threshold setting of every E1 branch. When error code rate of some branch is over the threshold, the system will automatically turn off and separate the E1 branch.
Turn off the separation function to achieve single-direction separation, which means it only cuts off the branch which is over the error code threshold in E1 lines, while transmission in the other direction is not influenced. It can carry out the dissymmetry of the two direction of Ethernet data transmission to be sure that there has the largest data transmission efficiency.
Satisfies the requirements of G.703, G.704, G.706, G.823 and I.431 of ITU.
Support local system to reset the remote system.
Full set of alarm indication, automatically deal with all kinds of line problems.
Cl-fom100/fom135/fom100s/fom135s fiber modem can modulate g.703 e1 or v.35 signal to single-mode or multimode fiber which extend the transmitting distance of e1 signal greatly. E1 signal support framed and unframed mode. When in framed mode, continuous or discontinuous time-slot can be selected. E1 fiber modem and v.35 fiber modem can be used together. Both of them are widely used in extending user interface in atm or ddn.Standalone and rack mount module are both available.
193 Gve Tplus(E1 G 703 To V 35 Ehernet Converter Suppliers
Short on time? Let Gve Tplus(E1 G 703 To V 35 Ehernet Converter sellers contact you.
