Glass Straight Line Edging Machine is suitable for grinding flat edge with arrises of different thickness and size glass. Equip with nine bowl or cup shape special purpose wheels, five for flat edge, and four for arrises. The grinding and polishing of flat edge with arrises are finished at one processing
Main features
A. It is suitable for the edge-finishing of the raw glass for insulating glass;
B. The glass transfer is nimbly and convenient, the edge-finishing effect is good.
Main technique parameter:
Power supply380v 50hz
Total power2.2kw
Working max glass thickness20mm
Outline size lxwxh3010x2110x1350mm
Total weight260kg
1- Processing speed: 1~5m/min
2- Min. processing size of glass: 60 x 60mm
3- Glass processing thickness: 3~25mm
4- Max. size of hemline grinding: 4mm
5- Processing degree: 0-45 degree
6- Total power: 20kw
7- Weight: 2800.00 kgs
8- Occupation area: (L x W x H) 6800 x 1200 x 2450 mm
The machine is designed for grinding/polishing bottom edge of flat glass, with arris grinding. Conveyor adopts chain transmitting system consisting of special stretchy rubber pads.Timing belt transfers glass.
185677 Glass Edging Machine Suppliers
Short on time? Let Glass Edging Machine sellers contact you.
1. It is designed for grinding straight line flat edging of different sizes and thickness.
2. The coarse grinding, refine grinding, polishing, and angle-making can be finished in one process.
3. The speed can be widely adjusted by its stepless regulator. Speed alteration is very smooth. In grinding operation, feeding and operation speed can be adjusted at random. Front rails can be adjusted to fit varied thickness of processed glass.
4. It is featured in advanced structure, high precision, easy handling, and high efficiency.
E adjusted smoothly by continuously variable mechanism transmission.
5. Adjust front rail to match different glass thickness.
6. The machine is equipped with automatic clamping system and voltage stabilizing system.
7. With easy operation, high precision and efficiency, this machine becomes one of indispensable equipment for glass procession.
The straight side can be groud to be flat and vertical to the surface of the glass. And it can bevel the arris of the straight edge to angle of 45 degree. The rough grinding, fine grinding, polishing for flat edge and arris bevelling can be finished at one travelling. Continuous processing can be taken for glass of the same thickness. The shineness of the glass edge surface after being processed will be almost the same as the glass flat surface.
This robust machine is designed to provide a ground and polished finish to the flat edge on flat glass up to 28mm thickness. The 9 spindle ôDE342Aö is the ideal machine for flat polishing all glass types, which can flat grind and polish flat edges together with ground and polished 45¦ arrises.
Operate and maintain.
Production speed is controlled via a motorvariator from 1.0 to 5.0 meters/minute.
Glass thickness is selected through a toggle switch linked to a servomotor and a digital display
The arris wheels automatically adjust with each thickness selected.
Each spindle has an associated ammeter enabling the operator to precisely regulate the degree of contact with the glass.
The entry and exit conveyors are toothed belts and the entry conveyor is equipped with a precise and easy-to-use gear reduction box that enables the operator to lower or raise the height of the inlet conveyor belt. This is especially beneficial when controlling the amount of glass removal without having to adjust each spindle individually.
The main conveyor is very robust with rubber covered nylon conveyor pads. The lubrication system is manual.
All motors are supplied according to clientÆs request, transformers are not used.
Technical data
Min. Process size:120mm*120mm
Max. Arris angle:45¦
Glass process thickness:3mm-28mm
Process speed:1.0-5.0m/min
Spindles:9
Power18.5kw
Overall dimension:6900*1200*2520(mm)
Weight:2750kgs
Spindles: 11 pcs
Processing glass thickness: 3-25mm
Angle of arris: 45 degree
Min.size of glass: 80mm*80mm
Processing speed: 0.5-4.5 m/mins
Installed power: 22 KW
Dimension: 7920Ã?1400Ã?2500mm
General description
ZM11 is suitable for processing straight-line edge & 45° arrises on glass. Rough, fine grinding and polishing on glass flat edge and arrises can be finished at one time.
A special design of the in-feed section for controlling the grinding amount of glass without adjusting each spindle individually.
Input and output conveyors adopt timing belt which can improve the stability of transmission.
Speed is adjusted by frequency inverter or stepless speed variator.
The Z M 9325 series glass straight line edging machine is suitable for different size and thickness flat glass grinding, it can rough grinding .fine grinding and polishing finish in one time;the polishing flat is similar to the smooth degree of glass body,while adjusting the different processing thickness,(you can refer the digital display in front beam to adjust);front chamferred motor can move syn chronically with front beam;with advanced structure,high precision,easy operation,It is the necessary tool for glass machinery.
Des20 double edger is applicable for grinding straight edge of flat glass of different size and thickness. It can bevel the arris of the straight edge to angle of 45íp and it also can grind the four angles. The rough grinding, fine grinding , polishing for flat edge and arris beveling can be finished at one traveling. Continuous processing can be taken for glass of the same thickness. The shininess of the glass edge surface after being processed will be almost the same as the glass flat surface.
1.2 operation condition
1.2.1 power supply: ac380v+/-10% three phase 50hz+/-2%
1.2.2 ambient temperature: 1íµ~40íµ
1.2.3 r.H: <90%
2. Technical data:
(1)Thickness range for glass to be processed: 3~25mm
(2) Beveling angle: 45íp
(3) Min. Size for glass to be processed: 300mm
Max. Size for glass to be processed: 4000mm
(4) Processing speed: 0.6~6m/min
(5) Installed power: 48.6kw
(6) Required area of the machine: 9000*7000*1900
This kind of machine is suitable for grinding flat glass straight-line bottom line of different size and thickness(e.G. Straight-line pencil edge, og edge etc). Its speed can be adjusted by stepless regulator at random during processing. Rough grinding, fine grinding and polishing can be completed in one procession. Easy operation, high efficiency.
Technical specifications:
Hym6320
1. The number of grinders: 6
2. Grinding speed: 500 ~ 2500mm/min
3. Glass thickness: 3 ~ 20mm
4. Size of processed glass: max: 3000 x 3000mm min: 100 x 100mm
5. Power: 16kw
6. Weight: 2600 kg
7. Size: 6400 x 1200 x 2500mm
Hym4320
1. The number of grinders: 4
2. Grinding speed: 500 ~ 2500mm/min
3. Glass thickness: 3 ~ 20mm
4. Size of processed glass: max: 3000 x 3000mm min: 100 x 100mm
5. Power: 11.3 kw
6. Weight: 2300 kg
7. Size: 5900 x 1200 x 2500mm
CNC glass machine which Automactically complete the glass drilling, grooving, chamfering, internal and external edging grinding, polishing etc.
2.Special converyor structure, can realize different specifications of glass connection processing
3.Spindle motor: adopts quick and easy disassembly spindle with shank.The maximum speed of the high-speed spindle: 12000 rev / min, the software comes with a tool magazine, it is very convenient to change the grinding wheel, and the parameter setting of the grinding wheel.
4.The way to determining the position ,we can though the photograph or directly on the Autocad drawing,The spindle can automatically catch the position ,The both way don't need the operator to operate the hand wheel to locate the position.it is automatic ,saving operation time.
The machine is suitable for edge and corner grinding of plate glass of different size and thickness,finishing coarse grinding and polishing at one time.
The flat surface after polishing is close to bright and clean degree of glass matrix.when adjusting different processing thickness(able to refer to data display instrument on front-axle beam),
former chamfering grinding head can move simultaneously along with the front-axle beam.It possesses the advantages of advances structure.
Ds1d shape edging/beveling machine applies to grinding and polishing for shaping peripheral and beveling edges of circular, ellipse and irregular flat glass, and also applies to semi-automatic grinding for circular and elliptical glass. Using different shaping grinding wheels can obtain the half- round, flat or og edges of glass. The grinding and polishing for bevel edges can be done by the means of adjusting angles of the grinding spindle and using the bowl-shaped grinding wheel
Technical data.
Feature: this machine is suitable for grinding and polishing peripheral edge and bevel of different shape flat glass. It can process semi-automatic procession for circular glass. Five-star suction tray adopts vacuum clamping. Its rolling speed can be adjusted at random during working. Install and adjust easily while processing different size glass.
Technical specifications:
1. Thickness: 3 ~ 25mm
2. Bevel edge angle range: 0 ~ 20 degrees
3. Maximum width of bevel edge: 32mm
4. Maximum diameter: 2000 mm
5. Minimum diameter: 120 mm
6. Power: 3.2 kw
7. Weight: 800 kg
Packed by plastic film or wooden case.
185677 Glass Edging Machine Suppliers
Short on time? Let Glass Edging Machine sellers contact you.
