Spindles: 11 pcs
Processing glass thickness: 3-25mm
Angle of arris: 45 degree
Min.size of glass: 80mm*80mm
Processing speed: 0.5-4.5 m/mins
Installed power: 22 KW
Dimension: 7920Ã?1400Ã?2500mm
General description
ZM11 is suitable for processing straight-line edge & 45° arrises on glass. Rough, fine grinding and polishing on glass flat edge and arrises can be finished at one time.
A special design of the in-feed section for controlling the grinding amount of glass without adjusting each spindle individually.
Input and output conveyors adopt timing belt which can improve the stability of transmission.
Speed is adjusted by frequency inverter or stepless speed variator.
Number of Spindles: 10
Max. glass dimension: Up to 2500
Min. glass size: 300x 300mm
Glass thickness: 3~12 mm
Working Speed: 0.5-18 m/mins
Width adjustment Speed: 8m/mins
Max. edge grinding: 1 mm
Tolerance of the diagonal(1000x1000): ±0.5mm
Tolerance on the parallelism(mm): ±0.2mm
Total power: 35 KW
General description
Production speed of 0.5-18m / min.
Modularise design
The automatic detects the glass length and width dimensions
Comprehensive solution setting, suitable for construction and decorative glass with variable size
Option: Pneumatic safety corner cutting, Extra polish, Low E deletion device
The straight side can be groud to be flat and vertical to the surface of the glass. And it can bevel the arris of the straight edge to angle of 45 degree. The rough grinding, fine grinding, polishing for flat edge and arris bevelling can be finished at one travelling. Continuous processing can be taken for glass of the same thickness. The shineness of the glass edge surface after being processed will be almost the same as the glass flat surface.
JH GLASS pattern glass is from 3mm-12mm , all is temperable quality , mainly used for glass table , cabinet, window,door ,indoor partition and curtain wall .
the main pattern including nashiji,mistlite,karatachi,moru,hitchcross,chinchilla,watercube,rain,bamboo ,etc.
JH acid etched glass is annealed glass treated with acid to give its surface a frosted look.Entire sheets of glass can be acid etched,or small sections can be treated to add specific designs. It make glass artistic ,beautiful and long lasting .Normal acid etched glass can be used to create doors,partitions,walls,shelves,and railings, special items can be used as �?�¢??anti-glare glass�?�¢?? for picture frame , screen ,etc.
Product items : single side acid etched glass / double side acid etched glass
Des20 double edger is applicable for grinding straight edge of flat glass of different size and thickness. It can bevel the arris of the straight edge to angle of 45íp and it also can grind the four angles. The rough grinding, fine grinding , polishing for flat edge and arris beveling can be finished at one traveling. Continuous processing can be taken for glass of the same thickness. The shininess of the glass edge surface after being processed will be almost the same as the glass flat surface.
1.2 operation condition
1.2.1 power supply: ac380v+/-10% three phase 50hz+/-2%
1.2.2 ambient temperature: 1íµ~40íµ
1.2.3 r.H: <90%
2. Technical data:
(1)Thickness range for glass to be processed: 3~25mm
(2) Beveling angle: 45íp
(3) Min. Size for glass to be processed: 300mm
Max. Size for glass to be processed: 4000mm
(4) Processing speed: 0.6~6m/min
(5) Installed power: 48.6kw
(6) Required area of the machine: 9000*7000*1900
