We are an importer/exporter logs-lumber-timber-wood products & custom made orders for wood products.
Most of the wood finished products mainly are produced in china mills or vietnam including especially for wooden boards like chipboards, osb boards, hardboards, soft boards, mdf/hdf boards, all type of plywood (film faced, wiremesh film , ordinary series, furniture (melamine plywood), commercial, fancy, hpl, uv, veneer, engineering, natural, etc.), doors, flooring and many more.
We can offer
Film faced suhhtering plywood
Size: 1220x2440mm 1500mmx3000mm 915mmx1830mm 1250x2500mm
Thickness : 5mm-25mm
Material : poplar, hardwood, combine, birch, finger joint board
Film color: brown, black, red
Glue: wbp, melamine, mr
If you let us know your requirement, quantity, port of destination, target price, we can offer you accordingly.
Film faced shuttering plywood is cost effective and a super finisher.
In total it saves over 40 percent in finishing costs, which is a boom for construction industry.
1st, moisture content<=14%
2nd, static bend degree >=24mpa >=75.8mpa
3th, angularity <= 1%
4th, thickness tolerance:ía0.5mm
5th, thickness expansion rate (72 hours normal temperature water immersion) <= 8%
Packing: inner pallets is wrapped with 0.2mm plastic bag, steel strip or pvc for strength, more than 3mm plywood, mdf or hard paper sheet covering all the sides, four edges sealed with waterproof paint.
WOODPECKERPLY Film Faced Concrete Shuttering Plywood is one of our premium products widely used for form (concrete shuttering) works across the globe. It is made using 100% eco-friendly plantation wood (rubber wood) veneers, which are as good as hardwood veneers with a density of 700 Kgs per CBM. These veneers are machine dried and bonded with high quality phenol formaldehyde (100% Boiling Water Proof) resin or MUF resin (Moisture Resistant) under controlled temperature and pressure. It is further covered with resin â?? treated paper that turns into a protective film during production. Edges are sealed with water based acrylic paint.
Surface Film: 125GSM Phenolic Film of Dynea Brand, Finland.
Face Veneer: Gurjan (Keruing)/ Pine imported wood
Core Veneer: Rubber Wood with density of 700 Kgs /CBM
Sizes: 1220/1250 MM (width) x 2440/2500 MM(length) x 12/15/18/21 MM(thickness)
101169 Film Faced Shutter Plywood Suppliers
Short on time? Let Film Faced Shutter Plywood sellers contact you.
Face/Back: Birch, Okoume, Bintangor, Pencil Cedar, Keruing, Poplar,Pine,Maple, Hardwood, Ash, Oak and so on
Core: Poplar, Hardwood, Combi, eucalypts, and so on
Grade: BB/BB, BB/CC, C2,C4,D2,D4
Glue: MR/E0/E1/E2,CARB P2
Size(mm) : 1220*2440mm,1220X2440mm 1250*2500mm,915*2135mm,915*1830mm
Thickness(mm): 2.0mm-30mm
Moisture: Low than 12%
Usage : Use for furniture or construction, package or industry
All thanks to our production capabilities backed by a well-endowed research module, we have developed super-class shuttering plywood across categories. Super quality highest repetition smooth shuttering ply: 30 kg to 50 kg (All glue line PF Based) Superior quality all core layer glued: PF based Glossy finish (highest imported 50 to 100 GSM film face plywood pressed with the high-quality press) High-End export quality Glossy Finish all layer glued PF based shuttering plywood.
Product Name
film faced plywood
Size
1220*2440/1250*2500mm
Thickness
12/15/18/21mm
Core
poplar/birch/Eucalyptus
Film
black/brown/red film
Glue
MR/Melamine/Phenolic
Logo
According to Order(more than 5 containers w ill free)
Min-qty
40HQ
Moisture
8%~12%
Payment
T/T 30%, L/C
Delivery time
within 15days (less than 5 containers)
Supply capacity
3000CBM/Month
Description
The clients can avail from us high grade Poplar Hardwood Birchcore two times press Film Faced Plywood .The Poplar Hardwood Brich Film Faced Plywood we offer is appreciated widely for its excellent properties and is suitable for use in varied construction applications. The Film Faced Plywood that we offer is coated with high quality film that ensures its hardness and damage resistance.
1. If put in boiling water for 48 hours, it is still glue-sticking and non-deformed
2. Physical mood is better than iron moulds and can satisfy the requirements of constructing mould, while the iron ones are easy to be deformed and can hardly recover its smoothness even after repairing
3. If used abide by the illustrations strictly, it can be reused more than 50 times, thus reducing the cost greatly and avoiding the disadvantages from ( rustily and erosive of iron mould)
4. Solves the problems of leaking and rough surface during constructing process
5. Particularly suitable for watering concrete project because it can make the concrete surface smooth and flat
WOODPECKERPLY Film Faced Concrete Shuttering Plywood is one of our premium products widely used for form (concrete shuttering) works across the globe. It is made using 100% eco-friendly plantation wood (rubber wood) veneers, which are as good as hardwood veneers with a density of 700 Kgs per CBM. These veneers are machine dried and bonded with high quality phenol formaldehyde (100% Boiling Water Proof) resin or MUF resin (Moisture Resistant) under controlled temperature and pressure. It is further covered with resin – treated paper that turns into a protective film during production. Edges are sealed with water based acrylic paint.
Surface Film: 125GSM Phenolic Film of Dynea Brand, Finland.
Face Veneer: Gurjan (Keruing)/ Pine imported wood
Core Veneer: Rubber Wood with density of 700 Kgs /CBM
Sizes: 1220/1250 MM (width) x 2440/2500 MM(length) x 12/15/18/21 MM(thickness)
Grades we have
MR (Moisture Resistant) Grade which facilitates 4 to 5 repetitions, depending
on handling and storage.
BWP (Boiling Water Proof) Grade which facilitates 10 to 12 repetitions,
depending on handling and storage.
Application:- Universally used for centering works for columns, beams, slabs etc.
Other uses are Outdoor furniture, structures,
vehicle body building, container flooring, etc.
Product detailed information:
Place of origin: Shandong,China
Material: Poplar,pine,eucalyptus,ect.
Size: 1220x1220mm,1220x2440mm,1250x2500mm,915x1830mm,ect.
Thickness: 9~25mm
Glue: WBP,MR,Melamine,Phenolic .
Surface: Film coated .
Film color: Black ,brown,red.
Technic: Two hot press .
Reuse time: 10~16 times .
Application: Can be widely used as high-rise buildings and overpass construction concrete formworks .
Main specifications:
1.Core:Poplar/eucalyptus/hardwood/combi
2.Size:1220x2440/1250x2500mm
3.Glue: MR/WBP/ Melamine
Product description:
Production Name Film Faced Plywood
Size1220x2440mm(4'x8'), 1250x2500mm, 915x1830(3'x6') or as agreed
Thickness8-24mm
Thickness Tolerance+/- 0.5mm
Number of PliesFrom 5 to 15 depending on thickness
Face/BackBlack Film, Brown Film, Red Film (Film can be printed with requested logo)
FinishGlossy, Matt, Anti-slip
CorePoplar, Hardwood, Birch, Combined
GlueMR/WBP/ Melamine
Products advantages:
1, Transference to concrete is set up very easily, so good for construction work
2, Waterproof, Wear-resistant, anti-cracking.
3, After installation of concrete, the surface looks like a mirror. (The cement does not stick.)
4, It can be used to make camber and it also can be cut into small pieces according the special requirements.
5. Environmentally friendly.
6 It can be used for a long time, and for the initial price paid for the material, you will feel its worth over time.
A. Film Faced Plywood Construction:
Plywood is made by gluing numerous thin strips of wood in alternating directions layer by layer, This construction is much less likely to expand or shrink based on moisture in the environment, and the alternating construction creates a board that is much stronger in each direction than a similarly sized board cut from a single tree.
Film coated plywood Surface Film is a resin impregnated paper overlay designed to improve the surface characterization of wood based panels used for applications such as concrete forming.
B. Wood based film faced plywood Advantages:
1.Substantial economy due to high performance.
2.Overlay extends the life of plywood and other engineered wood based panels.
3.Light Weight : More suitable for High building and Bridge construction project
4.Big Size : The biggest size are 1250*2500mm. Low the jonints quantity, High the work efficiency.
5.No warping, no out of shape, no fracture, It can stay 24 hours in boiling water with no bonding gap. High strength and 8-10 recycling times
Product Name
film faced plywood
Size
1220*2440/1250*2500mm
Thickness
12/15/18/21mm
Core
poplar/birch/Eucalyptus
Film
black/brown/red film
Glue
MR/Melamine/Phenolic
Logo
According to Order(more than 5 containers will free)
Min-qty
40HQ
Moisture
8%~12%
Payment
T/T 30%, L/C
Delivery time
within 15days (less than 5 containers)
Supply capacity
3000CBM/Month
Film Faced Plywood is a kind of Plywood overlaid by Phenolic Resin Film, Which has excllent function of WaterProof, Film face plywood
is mainly and Widely used in Construction Site as Shuttering Formwork.
Product:
Black Film Faced Plywood, Brown Film Faced Plywood
Type: construction plywood
Place of origin: linyi city, shandong province, china(mainland)
Brand name: betterway
Film:black, brown, red
Core: poplar, eucalyptus, birch, combi, hardwood or others
Grade: aa or requested by customers
Glue: wbp, mr , melamine
Formaldehyde emission:
E0 <5mg/1000kg;
E1 <9mg/1000kg;
E2 <30mg/1000kg
Size:(mm) 915*1830/1220*2440/1250*2550
Thickness: 6-27 mm
Thickness tolerance: 6 mm +/- 0.2 to 0.3 mm; 6-27 mm +/- 0.5 mm
Quantity: 20gp 8pallets/21m3; 40gp 16pallets/42 m3 ; 40hc 18pallets/53 m3 ;
Mositure: 12%
Press: one time/two times press grade
Certificates: iso9001 iso 14001 ce fsc carb
Min order: 1*20`ft container
Packaging: standard export packaging
Payment: t/t or l/c at sight
Delivery time: within 20 days after receiving deposite or original l/c at sight
For transportation of ocean and land, inside pallet is wrapped with 0.2mm plastic bag, steel strip or pvc for strength, more than 2mm plywood sheet or hard paper covering all the sides left, right, top and bottom.
