Gamut hydraulic copy turning face copying & copy boring. Gamut lathe tracers are made by graded casting and have been robustly constructed to take maximum cut with hardened tool post and very sensitive and precise copy-valve to render trouble free longer service. Gamut tracer can be mounted at rear or front of a lathe machine and can be operated by semi-skilled personnel. Inspection time is drastically reduced and production is increased by many times within accuracy of ±0.025mm when use good machining condition.
Features
•in-built lubrication system for tracing slide.
•6-station servo-actuated turret for multicut operation (optional item at extra cost).
•hardened tool post with quick change tool holder.
•finish cut system from 0-1.5 mm. Tool get advance automatically in finish cut mode.
•forward and retraction of slide and finish cut operation done manually by single operating handle. Electric push botton remote control at extra cost.
•master carrier for round master and flat template holder (optional at extra cost) can be set easily having arrangement for longitudinal and axial movements.
•power pack having dual delivery pump, oil level indicator, special isolator valve for pressure gauge and filters.
GAMUT Hydraulic Copy turning Face copying & Copy boring. GAMUT LATHE TRACERS are made by Graded Casting and have been Robustly constructed to take maximum cut with hardened tool post and very sensitive and precise Copy-Valve to render trouble free longer service. GAMUT TRACER can be mounted at rear or front of a lathe machine and can be operated by semi-skilled personnel. Inspection time is drastically reduced and production is increased by many times within accuracy of ±0.025mm when use good machining condition.
Features
•In-built Lubrication System for Tracing Slide.
•6-Station Servo-actuated Turret for multicut operation (Optional item at extra cost).
•Hardened Tool post with Quick Change Tool Holder.
•Finish cut system from 0-1.5 mm. Tool get advance automatically in finish cut mode.
•Forward and retraction of slide and finish cut operation done manually by single operating handle. Electric push botton remote control at extra cost.
•Master carrier for round master and Flat Template Holder (optional at extra cost) can be set easily having arrangement for longitudinal and axial movements.
•Power pack having Dual Delivery pump, Oil level indicator, special isolator valve for pressure gauge and filters.
GAMUT Hydraulic Copy turning Face copying & Copy boring. GAMUT LATHE TRACERS are made by Graded Casting and have been Robustly constructed to take maximum cut with hardened tool post and very sensitive and precise Copy-Valve to render trouble free longer service. GAMUT TRACER can be mounted at rear or front of a lathe machine and can be operated by semi-skilled personnel. Inspection time is drastically reduced and production is increased by many times within accuracy of ±0.025mm when use good machining condition.
Features
•In-built Lubrication System for Tracing Slide.
•6-Station Servo-actuated Turret for multicut operation (Optional item at extra cost).
•Hardened Tool post with Quick Change Tool Holder.
•Finish cut system from 0-1.5 mm. Tool get advance automatically in finish cut mode.
•Forward and retraction of slide and finish cut operation done manually by single operating handle. Electric push botton remote control at extra cost.
•Master carrier for round master and Flat Template Holder (optional at extra cost) can be set easily having arrangement for longitudinal and axial movements.
•Power pack having Dual Delivery pump, Oil level indicator, special isolator valve for pressure gauge and filters.
GAMUT Hydraulic Copy turning Face copying & Copy boring. GAMUT LATHE TRACERS are made by Graded Casting and have been Robustly constructed to take maximum cut with hardened tool post and very sensitive and precise Copy-Valve to render trouble free longer service. GAMUT TRACER can be mounted at rear or front of a lathe machine and can be operated by semi-skilled personnel. Inspection time is drastically reduced and production is increased by many times within accuracy of ±0.025mm when use good machining condition.
Features
•In-built Lubrication System for Tracing Slide.
•6-Station Servo-actuated Turret for multicut operation (Optional item at extra cost).
•Hardened Tool post with Quick Change Tool Holder.
•Finish cut system from 0-1.5 mm. Tool get advance automatically in finish cut mode.
•Forward and retraction of slide and finish cut operation done manually by single operating handle. Electric push botton remote control at extra cost.
•Master carrier for round master and Flat Template Holder (optional at extra cost) can be set easily having arrangement for longitudinal and axial movements.
•Power pack having Dual Delivery pump, Oil level indicator, special isolator valve for pressure gauge and filters.
GAMUT Vertical Broaching Machines are Pull Down Type and Hydraulically operated. These machines are precisely made with hardened, ground and chrome plated 4 guide bar with suitable linear guide bushes fitted on Broach puller holding guide plate which are bored on highly precise jig boring machine to maintained centerline with allied machine parts and suitably heat treated to give maximum accuracy continuously. These machines are robustly constructed to minimized vibration during Broaching operation.
Features :
•Built in Coolant Equipment
•Built in Hydraulic Power pack
•Splash Guard
•Broach pullers to suit broach shank with guide plate.
•Broach holding guide plate move up and down on 4 Hardened and ground guide bar.
•Broach guide bush for tail end to suit broach shank in case of Broach Retriever System
•Hydraulic broach Retriever System optional item at extra cost.
1No, Varies, varies
29066 Copy Turning Attachment For Lathe Suppliers
Short on time? Let Copy Turning Attachment For Lathe sellers contact you.
Gamut vertical broaching machines are pull down type and hydraulically operated. These machines are precisely made with hardened, ground and chrome plated 4 guide bar with suitable linear guide bushes fitted on broach puller holding guide plate which are bored on highly precise jig boring machine to maintained centerline with allied machine parts and suitably heat treated to give maximum accuracy continuously. These machines are robustly constructed to minimized vibration during broaching operation.
Features :
•Built in coolant equipment
•Built in hydraulic power pack
•Splash guard
•Broach pullers to suit broach shank with guide plate.
•Broach holding guide plate move up and down on 4 hardened and ground guide bar.
•Broach guide bush for tail end to suit broach shank in case of broach retriever system
•Hydraulic broach retriever system optional item at extra cost.
Gamut power operated hollow center chucks are precisely designed and they offer high accuracy and gripping power. These power operated hollow center chucks are also known for their high operational efficiency. Our power operated hollow center chucks are of double wedge type. We can also provide hollow center, two jaws, four jaws as well as high rpm chucks for nc and cnc m/c.
Features:
•Power chucks are of double wedge type
•The chuck body is made from steel forging suitably heat treated
•All bearing surfaces are suitably heat treated and precision ground
•The base jaws are made from high grade alloy steel, properly case hardened and grounded on all bearing surfaces and
Deep guided in chuck body
•The base jaw serrations are ground finished
•The wedge is double hook type to provide ample bearing area and is made form high grade case hardening alloy steel
•The wedge is suitably hardened and grounded on all sliding surfaces.
Size range: from 110mm diameter to 400mm diameter.
Juniper bushes can be found in eastern Europe, Bulgaria, Hungary, also in western Europe France and Spain and in north America - Canada.
This evergreen shrub grows up to 6 metres tall. It has dark green or blue needles and small flowers and berries. The berries change colour over the first few years of growth. They start off green, but after a year or two, they turn black.
Juniper is used to flavour food and drink and is the characteristic aroma in gin.
We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires.
Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants.
We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test.
The material can be loaded loose in 40 HC container.
For further details, please feel free to contact us.
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces.
Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%.
The max weight of each pieces is up to 1 ton.
The material can be loaded loose in 20 heavy duty container.
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry.
The level of Fe% in the slag has been estimated by water displacement test.
This material con offer competitive advantages respect other metal scraps:
Price;
Stable Chemistry;
The material can be loaded loose in 20 heavy duty container.
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm
Chemical Composition
Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
:
1. >85% Fe Average 600mm Max Fraction
2. >78% Fe Average 20-300mm Fraction
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
29066 Copy Turning Attachment For Lathe Suppliers
Short on time? Let Copy Turning Attachment For Lathe sellers contact you.
