1. The CMCI 205 extends the service life or the life span of the reinforced structures, enhances the durability of reinforcement and reduces maintenance costs of structures.
2. It is a Mixed type Corrosion Inhibitor, where it protects both the Anodic & Cathodic sites on the embedded steel surfaces.
3. It reduces the corrosion of reinforcement used in structures. Thus, it increases the strength of structures, extends their life and improves the security of the building or structure over the long term.
4. It protects the reinforcement against chloride attacks, that is responsible for pitting corrosion, especially at marine and offshore aggressive environmental conditions.
5. It is greatly reduces the onset of corrosion by establishing a mono molecular film on metal surfaces against corrosive ions attacks towards reinforced concrete.
6. It can be used with all types of reinforced concrete structures used in foundations, piles, pile caps, basements, tunnels, precast, pre-stressed, water reservoirs, pools, splash zones, marine and all types of concrete super and sub structure units.
7. It is compatible and it can be used in conjunction with all types of cement, fly ash, GGBS, microsilica, fibers and water proofing admixtures in the concrete mix.
8. It is water based, water based, organic and inorganic unique combined blend of group of corrosion inhibitors.
9. The CMCI 205 generally doubled the time to the onset of corrosion.
10. It used at low dosage (2 liters/m3) where it does not negatively alter or effect the physical properties of concrete mix.
Product Name: 2-Phosphonobutane -1,2,4-Tricarboxylic Acid(PBTCA) 50%
Synonyms : PBTCA 50%
M.F.: C7H11O9PCAS No.: 37971-36-1
Performance
Water Treatment chemical PBTCA, a good corrosion inhibitors, is widely used in circulating cool water system and oilfield water injection system antifouling treatment.
Water Treatment chemical PBTCA is used as a corrosion inhibitor for industrial water treatment. This product has excellent complexing ability with Ca2 +, Zn2 +, Cu2 +, Mg2 +.
The suitable PH range is from 7.0 to 9.5. It can operate at high temperature, high hardness, and high alkalinity conditions.
It allows coolingwater concentration factor increased to seven or more.
CareCoatis an innovative and highly effective corrosion inhibitor designed to protect metallic materials by providing a durable coating on their surfaces. This locally produced product is based on an internationally approved formulation and has undergone extensive research and testing to ensure its reliability and efficiency. CareCoat is a versatile solution used in various industries, with a primary focus on HVACR (Heating, Ventilation, Air Conditioning, and Refrigeration) systems.
CareCoat is not just a product; it's your armor against the relentless forces of corrosion! Imagine a world where your valuable metallic equipment and structures remain unscathed, where maintenance costs plummet, and reliability soars. CareCoat brings this vision to life.
Unleash the Power of CareCoat
Superior Corrosion Protection: CareCoat forms an impenetrable shield, safeguarding your assets from a multitude of corrosive adversaries.
Multi-Element Resistance: From salt spray to UV light, ammonia to bird droppings, CareCoat stands strong against them all.
Application Made Easy: Whether you prefer spray, roller brush, or dip, CareCoat adapts to your methods with ease.
Ready When You Are: Say goodbye to complicated preparations. CareCoat arrives ready-made, saving you precious time.
Versatile Applications: Protect everything from AC units to boilers, pipes to fan blades - CareCoat has you covered.
Long-Lasting Performance: With a shelf life of 2.5 years, CareCoat guarantees reliability over time.
Safety First: Non-hazardous and easy to handle, CareCoat puts safety at the forefront.
UV Resistance: Sun or rain, CareCoat's got you covered with unbeatable UV resistance.
Minimal Heat Transfer Reduction: Maintain perfect heat conduction even with CareCoat in place.
CareCoat is more than a product; it's your partner in preserving your investments. Its unbeatable quality and competitive pricing outshine imported alternatives. Say goodbye to corrosion-related headaches and embrace a world where your assets thrive. Extend the lifespan of your equipment, reduce maintenance hassles, and ensure unwavering performance, even in the harshest conditions. Choose CareCoat and fortify your future.
Introduction to the product
CW-TAB Corrosion and Scale Inhibitor Tablets are solid tablets manufactured by isolating, wrapping, release-controlling water treatment chemicals. and pressing it into solid tablets with the high-pressure production process and CRT controlled release technology. Its formulation set contains ferrous metal corrosion inhibitor, non-ferrous metal corrosion inhibitor, scale inhibitor, dispersant, deposition inhibitors, etc. Different from liquid water treatment chemicals the content of active matter is only 20%-30%, CW-TAB contains over 95% of active matters. When added into the system, each 100g can release active ingredients continuously for 3 to 4 weeks, to effectively control the corrosion and scaling of the cooling water system.
Method of use
The recommended dosing concentration of CW-TAB is 20-25ppm. You may simply hang the tablets in the water distribution pan or water collection pan of the cooling tower and other places where the water will go through. The tablets will dissolve and release active ingredients slowly for up to three to four weeks, and then be replaced after complete dissolution. Every 2 tablets of CW-TAB 200g can help with the daily maintenance of a cooling water system 0~25RT for three to four weeks, and the monthly dosage for a cooling water system of 100 RT is only 2kg. For larger systems 300RT or more, a special Leap tablet dosing device can be used to achieve the automatic dosing of tablets.
Corrosion and scale inhibitor is an important water treatment agent, which is mainly used in circulating cooling water system, such as power plants, chemical plants, central air conditioning, etc. to prevent scale formation and metal corrosion. These products are usually compounded from a variety of ingredients, including chelating agents, dispersants, corrosion inhibitors, etc., which work together to achieve the effect of scale and corrosion inhibition.
What are Corrosion Inhibitors and Scale Inhibitors?
Corrosion and scale inhibitors are specially tailored chemicals that, when added at low concentrations in water, delay or prevent the formation of scale, which would normally form in water. Corrosion and scale inhibitors are similar to preventing scaling in washing machines, and similar chemicals are used. Ultimately, inhibition can be achieved by adding substances that react with the potential scaling material to achieve a thermodynamically stable region, or by adding substances that inhibit crystal growth. The use of these chemicals is therefore attractive because very low doses (a few ppm) are sufficient to prevent prolonged fouling of surfaces or equipment treatments. The exact mechanism of scale inhibitors is not fully understood.
Cormix II is a nitrite-free dibasic acids blend, primarily C11 and C12 , which provides excellent ferrous corrosion inhibition properties. It is used in a variety of corrosion inhibitor applications, including metalworking fluids, engine coolants, metal cleaners, aqueous hydraulic fluids, and die cast release agents. 1.0-5.0%
Benefits:
Superior corrosion protection Â
Good compatible with hard water
No nitrites
Storage:
In accordance with local regulations, store in original container protected from direct sunlight in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use.
A corrosion inhibitor is a chemical compound or substance designed to mitigate or prevent corrosion, which is the deterioration of materials, particularly metals, due to chemical reactions with their environment. These inhibitors work by forming a protective layer on the metal's surface, blocking or slowing down the corrosion process. Corrosion inhibitors find extensive use in industries such as manufacturing, oil and gas, transportation, and infrastructure to prolong the lifespan of equipment, pipelines, and structures, ultimately saving costs and ensuring safety. They play a crucial role in safeguarding the integrity and functionality of metal components exposed to corrosive conditions, such as moisture, chemicals, or extreme temperatures.
We are one of the concrete pump manufacturers in Korea
Brand: SAMIL GIANT in Korea
Boom length: 67m 62m 58m 52m 48m 45m 42m 37m 32m 28m 24m 21m
Stationary pump, Line pump
We are able to send full details if you make an inquiry
Characters
Comply with the ANSI/NSF Standard
60 standard;
Comply with China drink water certificate;
Effectively applied to the DOW Chemical Companys Filmtec membranes & the Nitto Denko companys RO membranes;
Compatible with organic flocculants and ST
Suitable for water with high hardness, high alkaline,high pH.Effectively control the deposition of carbonate, sulfate,calcium fluoride & dispersed metal oxide on the surface of the membrane;
pH range: 5.0-9.0;
Physical Properties
Appearance:Colorless to Light yellow liquid;
Density(20):1.20 ±0.05g/cm3
pH(1.0%):1.5~3.5
Solubility:completely soluble in water
Main Properties
Pale yellow to Light brown liquid. S.G.: 1.03-1.07 pH 5% solution: 9.2 â?? 10.2 Solubility in water: 100% 2% treatment reduces >50% Av & YP.
Application
Inhibits shale +Gumbo shale, protects cuttings from hydration, prevents bit balling, Effective at high concn. of Cl-,Protects tubulars from corrosion, Environmentally friendly& Non-Toxic.
Packing
200 ltrs (55 gal.) in drums. Customised packing
Concrete transfer pump, also known as concrete pump, consists of pump body and delivery pipe. It is a kind of machinery that uses pressure to transport concrete continuously along the pipeline, and is mainly used in housing construction, bridge and tunnel construction. It is mainly divided into gate valve concrete transfer pump and S valve concrete transfer pump. Another is the pump body mounted on the car chassis, and then equipped with retractable or flexural fabric rod, and the composition of the pump truck.
