Mt-4000 is a cnc turning and milling center that performs different tasks simultaneously. We have patent registered in taiwan, china, japan and germany. (usa patent pending)
Features:
1. Maximum turning length: 4000mm.
2. Standardized 12 tools for turning tasks; more than 24 optional tools for milling tasks available.
3. Rigid machine structure.
4. Stable loading capacity that allows 4000mm to 6000mm turning tasks.
5. Maximum milling dia. 400mm.
Brand name: welltech machinery
We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).
7148 Cnc Turning And Milling Center (Mt Series) Suppliers
Short on time? Let Cnc Turning And Milling Center (Mt Series) sellers contact you.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires.
Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants.
We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test.
The material can be loaded loose in 40 HC container.
For further details, please feel free to contact us.
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces.
Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%.
The max weight of each pieces is up to 1 ton.
The material can be loaded loose in 20 heavy duty container.
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry.
The level of Fe% in the slag has been estimated by water displacement test.
This material con offer competitive advantages respect other metal scraps:
Price;
Stable Chemistry;
The material can be loaded loose in 20 heavy duty container.
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm
Chemical Composition
Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
:
1. >85% Fe Average 600mm Max Fraction
2. >78% Fe Average 20-300mm Fraction
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills.
It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color.
Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating.
From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list
In particular the mill scale can be classified as follows:
Einecs (european commission no.): 266-007-8
Waste code: 10 02 10
Basel code: b 12 30
Hs code: 2619.00
These cast iron skulls are a by-product derived from the cast iron foundries. The byproduct is a ferrous by-product which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes.
The material is separated by magnet and screener.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
Black Pepper Oleoresin
Botanical: Piper nigrum
Family: N.O. Piperaceae
Hindi Name: Gol Mirch
General Description: The best Pepper of commerce comes from Malabar. Pepper is mentioned by Roman writers in the fifth century. The plant can attain a height of 20 or more feet, but for commercial purposes it is restricted to 12 feet. The plant is propagated by cuttings and grown at the base of trees with a rough, prickly bark to support them. Between three or four years after planting they commence fruiting and their productiveness ends about the fifteenth year. The berries are collected as soon as they turn red and before they are quite ripe; they are then dried in the sun.
Geographical Sources: Black pepper is native to Malabar, a region in the Western Coast of South India; part of the union state Kerala. It is also grown in Malaysia and Indonesia since about that time when it was found in the Malabar Coast. In the last decades of the 20th century, pepper production increased dramatically as new plantations were founded in Thailand, Vietnam, China and Sri Lanka. The most important producers are India and Indonesia, which together account for about 50% of the whole production volume
History/Region of Origin: In South India wild, and in Cochin-China; also cultivated in East and West Indies, Malay Peninsula, Malay Archipelago, Siam, Malabar, etc.
Varieties -> in trade, the pepper grades are identified by their origin. In India -> The most important Indian grades are Malabar and Tellicherry (Thalassery). The Malabar grade is regular black pepper with a slightly greenish hue, while Tellicherry is a special product. Both Indian black peppers, but especially the Telicherry grade, are very aromatic and pungent. In the past, Malabar pepper was also traded under names like Goa or Aleppi. Cochin is the pepper trade center in India.
In South East Asia, the most reputated proveniences for black pepper are Sarawak in Malaysia and Lampong from Sumatra/Indonesia. Both produce small-fruited black pepper that takes on a greyish colour during storage; both have a less-developed aroma, but Lampong pepper is pretty hot. Sarawak pepper is mild and often described fruity.
Description: Oleoresin Black Pepper is the natural extract of dried tender berries of Piper Nigrum Linn of family Piperaceae.
Manufacturing Process: It is obtained by the solvent extraction of Black Pepper and the solvent traces are removed by distilling it in vacua at controlled temperature.
Physical Appearance: It is a yellowish brown viscous liquid with pungent slightly biting aroma of Black Pepper.
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing.
Main Specification
(Customized size is acceptable.) 3.0mm thickness
* 12mm width *15m roll length
2.5mm thickness * 8mm width * 15m roll length
2 mm thickness * 15mm width * 20m roll length
2.5 mm thickness * 8mm width * 20m roll length
Main Color
black, grey, white
Technical Data
Product Series FOCUS-6100
Application Composite Materials Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 23N/cm
Tensile Strength 220KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion.
Wide application temperature range.
Excellent performance in waterproofing and sealing.
Applications
* During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent
sealing property between vacuum bags and molds.
* During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds.
* As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht.
* Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
IR 64 Parboiled Rice | FOB India | Certified: APEDA, FSSAI, BRC
Price : USD 485-500
Product Description:
IR 64 Parboiled Rice is one of India's leading non-basmati long-grain rice varieties, known for its excellent cooking quality, long grain length, and affordability. Sourced directly from premium Indian rice mills and processed with strict quality controls, this rice is ideal for bulk importers, wholesalers, and food industries worldwide.
Product Specification:
Origin: India
Moisture: 14%
Broken: 5%
Damaged: 1%
Foreign Matter Includeing Paddy: 1%
Milling Degree: Well Milled
Key Features:
Long Grain Non-Basmati Parboiled Rice
Well-Milled and Double Polished
Excellent Cooking Quality - Non-Sticky Texture
Low Broken Ratio - 5%
Ideal for Africa, Middle East, Southeast Asia Markets
Flexible Packaging Options for Bulk Buyers
APEDA & FSSAI Certified Indian Exporter
Packaging & Delivery:
Price: FOB India $485 - $500 per MT
Minimum Order: 25 MT (1 x 20FT Container)
Packaging Options: 5kg, 10kg, 25kg, 50kg PP Bags or Customized Packaging Available
Certification & Compliance:
APEDA -Government of India Export Certification
FSSAI - Food Safety and Quality Compliance
BRC - International Food Safety Standard
Contact US
Looking for a reliable IR 64 Parboiled Rice supplier from India?
Khumsub Company delivers high-quality, certified rice at competitive prices with export-ready logistics
Keywords : Well Milled Parboiled Rice
Bulk Rice Supplier India
Cheap Wholesale Parboiled Rice
MOQ : 25MT - 1 cont x20FCL
Place Of Origin : India
Brand Name : Private Label
White Rice Premium Quality FOB Myanmar ISO HACCP HALAL SGS Certified
Price USD 410
Product Description
Product Description
Our White Rice is carefully selected from highquality paddy fields in Myanmar and processed using modern milling technology to ensure superior purity texture and taste Double polished and well milled for a clean glossy appearance our rice is ideal for retail foodservice and wholesale buyers seeking reliable quality at competitive FOB pricing
Product Specification
Origin Thailand
Broken 5
Whole Kernels Head Rice 95
Red Red Streaked Kernels 20
Damaged Kernels 20
Yellow Kernels 10
Foreign Matters 05
Paddy Kernels 5 grains per kg
Chalky Kernels 60
Milling Degree Well Milled Double Polished
Moisture 14
Key Features
High Milling Quality Well milled and double polished for premium presentation
Clean Consistent Low impurity levels with controlled moisture and minimal damage
Global Certification Standards Fully compliant with ISO HACCP HALAL and SGS
Versatile Use Ideal for wholesalers food processors and consumer packaging
Custom Packaging OEM Options available to meet your branding and volume needs
Reliable FOB Pricing Competitive rates with consistent yearround availability
Packaging Delivery
Pricing Terms FOB Myanmar 410 per metric ton
Minimum Order Quantity MOQ 25 Metric Tons20 feet container
Packaging Options 5kg 10kg 25kg 50kg PP Bags or Customized Packaging Available
Certification Compliance
ISO Certified International Quality Standard
HACCP Compliant Food Safety Assurance
HALAL Certified Islamic Dietary Law Compliance
SGS Verified ThirdParty Quality Inspection
Contact US
Contact us now for quotations samples and detailed product specifications Ensure premium quality wellmilled long grain white rice for your business at competitive FOB Myanmar prices Reliable yearround supply and flexible packaging options available to meet your market needs
Keywords Wholesale White Rice
Myanmar Rice Exporter
White Rice Bulk Supplier
MOQ 25 MT
Place Of Origin Myanmar
Brand Name Private Label
7148 Cnc Turning And Milling Center (Mt Series) Suppliers
Short on time? Let Cnc Turning And Milling Center (Mt Series) sellers contact you.
