Ceramic Fiber product is made from long flexible bulk fiber which is a high temperature fire resistance material containing of pure alumina, silica & zirconia.
It is used for various applications some of are reformer of furnace, tube seal, gasket & expansion joint, high temperature pipe, duct, turbine insulations, kiln car insulations & seals, boiler insulation and many more insulation purposes.
GENERAL INFORMATION:
CMAX ceramic fiber boards are manufactured in a wet vacuum forming process by blending the chopped ceramic fiber with inorganic or organic binders for excellent abrasive resistance at high temperature.
CMAX ceramic fiber boards feature low thermal conductivity, high thermal stability and excellent thermal shock resistance.
The products are classified as STD, HP, HA and HZ respectively corresponding to different maximum service temperature 1000ºC, 1100ºC, 1200ºC and 1350ºC.
Advantages:
Low heat storage
Low thermal conductivity
Excellent abrasive resistance
Excellent thermal shock resistance
Excellent chemical stability
Even density and thickness
APPLICATION:
Hot air duct lining
Shuttle kiln with high gas velocity
Laboratory furnace
Kiln car insulation
Die-cut high temperature seal
Based on order, special sizes are available.
This information, subject to change, is offered solely for your consideration. Users of our products should make their own tests to determine the suitability of each product for their particular purposes. Nothing contained in this brochure is to be understood as authorization or recommendation to use our products in the infringement of ant patent.
JIUQIANG Ceramic fiber board is featured with high temperature stability,low thermal conductivity,consistent density,and excellent resistance against thermal shock and chemical attack.Ceramic fiber board also resists oxidation and redution.Ceramic fiber board are available in a available in a variety of temperature ratings,densities,thicknesses,widths and lengths,and custom vacuum formed shapes.
129956 Ceramic Fiber Board Suppliers
Short on time? Let Ceramic Fiber Board sellers contact you.
Density: 260-320 kg/m ³ (16-20 lb/ft ³)
Raw materials: Spun ceramic fiber bulk
Thickness: 10mm, 20-50 mm
Asbestos: 100% Non Asbestos
Function: Refractory & Fireproof & Insulation
ROSEWOOL ceramic fiber board is made of ceramic fiber cotton by the process of vacuum forming or dry process refined by dry and machining. It has good specialties of rigid ity flexibility heavy intensity anti-wind erosion, non-expansion, lightweight, and easy to construct. It can be cut and bent optionally. Thus, it is the practical and efficient material of kiln and furnace, pipe and other thermal insulation equipment.
Ceramic Fiber Board Application
1. The wall liner and back lining materials of high-temperature reaction, reheating equipment and various industrial furnace such as used glass tempering furnace, pottery kiln, ceramic kiln and tunnel kiln
2. Insulating and fire proof plate of furnace door and roof or house chimney and fireplace
3. Lows fire proof and insulation for chimney cake ovens, pizza oven
4. Boilers and heater combustion chamber
5. Aluminum factories-reduction cell firebricks back linings
Ceramic fiber board is made from high quality fiber and a small amount of organic binder. Due to the high fiber content. Ceramic fiber board is strong, light weight and thermal shock resistant. Thicknesses over 50mm are contained by bonding resistance two thinner sheets.
Description:
Huolong 1050/1260 Ceramic Fiber Board was processed by the advanced production line, which was adopted the full automatic control and the continuous- processing method.
Huolong 1050/1260 Ceramic Fiber Board have many typical characteristics, such as exact measurement,excellent toughness,excellent heat preservation and can be cut discretionally
The processing work is much advanced, which totally avoid the long production cycle and the low production capacity.
Huolong 1050/1260 Ceramic Fiber Board is divided in different series by the temperature, can be widely used as the back lining of industrial furnace and the hot surface of the low temperature furnace. It is one of the guarantees of reaching the energy conservation and the high quality.
Characteristic Low Heat Storage,low thermal conductivity Excellent compressive strength Not fragile materials, excellent flexibility Exact measurement,excellent flatness Homogeneous structure, excellent machine-processed capability
Easily fixing specialty
Processed continuously,the fibers interweave shapely and excellent stability Excellent chemical stability and thermal shock resistance
Application: Heat preservation and insulation materials as the back lines for the kilns in the field of cement building Heat preservation materials as the back lines for the kilns in the field of ceramic Heat preservation materials as the wall lines and back lines for the kilns in the field of metallurgy and petrochemical industry Heat preservation materials as the wall lines and back lines for the Glass furnace. Refractory and insulating materials for heat treatment equipment The back lines of refractory brick for electrolytic reducing bath in aluminum factory
Materials of the wall lines and back lines of heat and pyroreaction equipment
Product Series
YAOXING 1050 Ceramic Fiber Board YXTX-134
YAOXING 1260 Ceramic Fiber Board YXTX-234
YAOXING High Pure Ceramic Fiber Board YXTX-334
YAOXING High Aluminum Ceramic Fiber Board YXTX-434
YAOXING High Zirconium Ceramic Fiber Board YXTX-534.
Description:
1.YAOXING 1050/1260 Ceramic Fiber Board was processed by the advanced production line, which was adopted the full automatic control and the continuous- processing method.
2.YAOXING 1050/1260 Ceramic Fiber Board have many typical characteristics, such as exact measurement£¬excellent toughness£¬excellent heat preservation and can be cut discretionally
3.The processing work is much advanced, which totally avoid the long production cycle and the low production capacity.
4.YAOXING 1050/1260 Ceramic Fiber Board is divided in different series by the temperature,can be widely used as the back lining of industrial furnace and the hot surface of the low temperature furnace. It is one of the guarantees of reaching the energy conservation and the high quality.
Ceramic fiber board super manufacturer: vacuum molding ceramic fiber board, asbestos free, excellent pressure resistance with long service life.
Model: spe-sf-cgb.
Characteristics:
Super ceramic fiber board are made from super ceramic blown fiber bulk with inorganic and suitable organic binders through vacuum molding and microwave furnace drying and formation. Our modern production technics works under the full automatic control and continuous production. The products are the perfect insulation materials for the lining of furnace. In the process of heating application, the organic binder will be volatilized at the temperature 250-350?, after volatilization, the board is pure white.
The classification temperature(?): 1050, 1260, 1360, 1450
* smooth surface, accurate size, even density.
* high resistance to press and wind corrosion.
* excellent thermal and chemical stability.
* excellent tenacity, easy to cut.
* low heat storage, low thermal conductivity, low shrinkage, excellent insulation effect.
* good erosion resistance.
* easy application, can be used in direct contact with flame.
Applications:
* back-up lining material of high temperature industry furnace.
* hot-face lining of ceramic kiln, heat treatment furnace and other industry kilns.
* back-up insulation for castable, brick and monolithic refractory.
* barrier again heat or flame.
Description
ceramic fiber process board and flame shield was processed by vacuum formed technics, the intention of researching this product is to process the self-support and rigid fiber board which had excellent thermal insulation capability
Ceramic fiber process board and flame shield board have more intensity than fiber blanket and vacuum formed felt, which apply to the region of requiring rigid intensity otherwise, according to apply requirement, the thermal insulation, abrasion-resistance and intensity of board need to improve more. If there have vacuum formed ceramic fiber board product with a bigger density
High purity ceramic fiber flame shield apply to the mostly environment of the highest temperature is 1260 centigrade special formula make its performance reinforced under more than 1000 centigrade environment
Ceramic fiber flame shield was an excellent intensity board which is processed with specially additive. This product is tenacity, excellent pressure resistance and thermal insulation &excellent self-support capability; as excellent thermal insulation materials of industrial furnace temperature section
The ingredient of ceramic fiber process board and flame shield which included a little organic binder to reinforce their cooling intensity, the organic matter could be burn off at first burning approximately 200 to 300 centigrade
Technical index:
Product name Huolong ceramic fiber machine-process board Huolong ceramic fiber flame shield board
Classification temperature 1260 1400 1260 1400
Product code HLGX-234 HLGX-334 HLGX-534 HLGX-364D HLGX-464D
Shrinkage on heating (%) 1000f¦f-24hf_-3 1100f¦f-24hf_-3 1350f¦f-24hf_-3 1100f¦f-24hf_-3 1200f¦f-24hf_-3
Academic thermal conductivity
(W/m•k) (average200f¦) 0.065-0.085 0.070-0.090 0.103
(average400f¦) 0.095-0.112 0.110-0.125 0.125
(average600f¦) 0.145-0.165 0.155-0.175 0.151
dampish rate·+·-·¼ f_1
Organic Content·+·-·¼ f_5
Density (kg/m3) 280/300/320 320
specification·+mm·¼ 900/1000/1100f-500/600/700f-20/25/50 800/900f-600/700f-25/30/40/50
Package Plastic bag inside, paper carton outside
Quality and environmental system authentication ISO9001-2000 ,ISO14001-1996
Application:
Industry of steel :Insulation material of expanded gaps, back-lining, thermal separator sheet and mold
Industry of no-ferrous: pouring basket and launder are used for casting copper or copper alloy
Industry of ceramic: insulation material of light weight furnace cars structure and furnace hot surface lining, comparting and sheltering from fire in each temperature section.
Industry of glass: insulation material in the molten pool back-lining, nozzle
Industry of furnace construction: fire-proof material on hot surface(substitute blanket),heavy weight fire-proof material back-lining, expanded gaps
Light industry: firebox back-lining of industrial and domestic furnace
Petrochemical industry: Heating furnace back-lining material on surface
Ceramic fibers are small-dimension filament or thread composed of a ceramic material, usually alumina and silica, used in light weight units for electrical,thermal,and sound insulation.
Ceramic fiber is crystalline or amorphous synthetic minerals, which are characterized by their refractory nature, they are obtained mainly in the form of whiskers.They are normally composed of silica and alumina oxides. Most ceramic fibers are poly crystalline or poly crystalline oxides and are generally white in color. These fibers are used where high temperature resistance is required.
Ceramic fiber board is in addition to corresponding loose ceramic fiber cotton excellent properties outside, product quality of a material is solid, toughness and good strength, good resistance to erosion ability. Heating not inflation, qualitative light, construction is convenient, can be arbitrary shear bending, is kiln, pipelines and other heat preservation of energy-saving material ideal equipment.
High compressive strength, good flatness and mechanical process ability. Temperature is and it is the ideal material for wall liner and back lining of the heating equipment.
Ceramic fiber board
Characteristics¡êo
Flat surface
Equal volumetric weight and thickness
Excellent mechanical and structure strength
Low thermal conductivity and low shrinkage
Air-current resistant washing
Typical application:
Heat insulation for back lining of high temperature industrial furnace
Heat surface lining materials for porcelain furnace, heat treatment furnace of mechanical and metallurgy and other industrial furnaces.
Size(mm):
Common specification: 600*400*10-5¡ê»900*600*20-50
Other made according to customer's requirements
Features
1.Low thermal conductivity
2.Low thermal capacity
3.Good thermal shock resistance
4.Flexible and tearing resistance
5.No asbestos and anti-corrosive
6.Good electric and sound insulation
7.Good mechanical working performance
8.Even thickness and density.
Application
1.Industrial furnace wall lining
2.Masonry insulation
3.High temperature furnace linling of the kiln
4.Kiln car furnace door baffle
5.Furnace temperature separation plate
6.High temperature,high fever equipment insulation
7.Insulation IAF
8.Shipbuliding insulation
9.Fire safety
10.Noise insulation
11.Available size:600*400*10-50mm,900*600*20-50mm,1200*1000*10-100mm.
Wrapped by plastic bag inside, protected by carton box outside.
Huolong 1050/1260 Ceramic Fiber Board was processed by the advanced production line, which was adopted the full automatic control and the continuous- processing method. Huolong 1050/1260 Ceramic Fiber Board have many typical characteristics, such as exact measurement,excellent toughness,excellent heat preservation and can be cut discretionally The processing work is much advanced, which totally avoid the long production cycle and the low production capacity. Huolong 1050/1260 Ceramic Fiber Board is divided in different series by the temperature, can be widely used as the back lining of industrial furnace and the hot surface of the low temperature furnace. It is one of the guarantees of reaching the energy conservation and the high quality.
Characteristic
Low Heat Storage,low thermal conductivity Excellent compressive strength Not fragile materials, excellent flexibility Exact measurement,excellent flatness Homogeneous structure, excellent machine-processed capability Easily fixing specialty Processed continuously,the fibers interweave shapely and excellent stability Excellent chemical stability and thermal shock resistance
Application:
Heat preservation and insulation materials as the back lines for the kilns in the field of cement building Heat preservation materials as the back lines for the kilns in the field of ceramic Heat preservation materials as the wall lines and back lines for the kilns in the field of metallurgy and petrochemical industry Heat preservation materials as the wall lines and back lines for the Glass furnace. Refractory and insulating materials for heat treatment equipment The back lines of refractory brick for electrolytic reducing bath in aluminum factory Materials of the wall lines and back lines of heat and pyroreaction equipment
ZIBO SK ceramic fiber board is manufactured and designed for the thermal applications requesting high demands on rigidity, the thermal insulation properties and abrasion resistance of ceramic fiber board have been further improved due to the higher density. Ceramic fiber board is a vacuum formed product that resists higher gas velocities than ceramic fiber blanket. It is ideal for furnace, boiler duct and stack lining thanks to its low thermal conductivity and low heat storage, which makes the shorter cycle times and quicker access for maintenance in the industrial furnaces possible.
Features
High rigidity and light weight
Low thermal conductivity
Resistance to thermal shock and gas erosion
Easy cutting and engineering, mechanical flexibility
Resists penetration by molten alumina and other non-ferrous metals
Typical Applications
Refractory lining for industrial furnaces
Combustion chamber liner,boilers and heaters
Back-up insulation for monolithic refractories
Transfer of non-ferrous metals
Expansion joint boards
Barrier against flame
This Ceramic Fiber Board is prepared in conventional size and which can be customized as per the demands of the buyers. These boards are available with a dimension of 500 x 1000, 600 x 1000. These boards are also prepared with various densities like 260, 330, 230, 200 and many other. These Ceramic boards are surely available in the stores and can be formed as per our conditions.
We have achieved expertise in giving a certified range of Ceramic Fiber Board. Advanced range of Ceramic Fiber Board is examined for its quality under the administration of highly trained and skilled quality experts before launching in the stores. It is available in a variety of heat degrees, quantities, densities, amplitudes, and lengths, and a custom vacuum created shapes. Furthermore, our buyers can avail these products at a sensible market value from us.
Our ceramic fiber huge board are long-lasting and practically suitable with your innovative idea.
Our crops have low thermal conductivity capability to work at different temperature requirements efficiently.
We are using pure aluminum silica and zirconia for manufacturing our ceramic fiber board in various forms and structures.
