CASfire Technical Co.,Ltd have rich experience to provide BSS 7239 Toxicity Test to Aircraft Material
BSS 7239 Toxicity Test to Aircraft material
BSS 7239: Test method for toxic gas generation by materials on combustion
BSS 7239 Toxicity Test to Aircraft material - Brief
Gases produced for analysis are generated in a specified, calibrated smoke chamber during standard rate of smoke generation testing (ASTM E 662), in both flaming combustion and non-flaming pyrolytic decomposition test modes
BSS 7239 Toxicity Test to Aircraft material- Gases measured
The following gases are required to be measured by this test standard
CO Carbon monoxide
HF Hydrogen Fluoride
HCl Hydrogen chloride
NOx Nitrogen oxides (Both NO, nitric oxide, and NO2, Nitrogen dioxide, are detected)
SO2 Sulfur dioxide
HCN Hydrogen cyanide
Fire test to aircraft material relative standards
FAR 25.853 flammability test to aircraft material
Air bus standard ABD 0031 - airbus fire testing â?? flame, smoke and toxicity
Boeing Standard BSS 7238 fire testing to smoke density
Boeing Standard BSS 7239 fire testing to toxicity
ASTM Standard ASTM E 662 fire testing to Smoke Density
ASTM Standard ASTM E 162 Surface Flammability of materials
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry.
The level of Fe% in the slag has been estimated by water displacement test.
This material con offer competitive advantages respect other metal scraps:
Price;
Stable Chemistry;
The material can be loaded loose in 20 heavy duty container.
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
:
1. >85% Fe Average 600mm Max Fraction
2. >78% Fe Average 20-300mm Fraction
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires.
Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants.
We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test.
The material can be loaded loose in 40 HC container.
For further details, please feel free to contact us.
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
12504 Bss 7239 Toxicity Test To Aircraft Material Suppliers
Short on time? Let Bss 7239 Toxicity Test To Aircraft Material sellers contact you.
We supply registered Holstein/Friesian bulls for breeding purposes at age ready for mating.
The FOB price quoted includes:
sourcing and selection from breeder on farm, transport to quarantine facility, isolation, selection & approval by Breed Society, quarantine (management, handling, care, feeding), fertility certified, vaccinations, treatments, vet inspection, preparation for shipment, crate (one IATA approved crate can accommodate 3 animals), State Vet supervision, transport to airport, loading, shipping & other documents.
The FoB price excludes:
- sampling, testing, and lab fees are not included because veterinary import requirements are not known
- visit and selection by the buyer are not included
These animals can only be shipped on a freighter aircraft with main deck capacity.
We supply Holstein/Friesian in calf heifers for breeding purposes.
The FOB price quoted includes:
sourcing and selection from breeder on farm, transport to quarantine facility, isolation, selection & approval by Breed Society, quarantine (management, handling, care, feeding), confirmed 3 to 6 months pregnant (sire of unborn calf has no relation to heifer), vaccinations, treatments, vet inspection, preparation for shipment, crate (one IATA approved crate can accommodate 5 animals), Veterinary and State Vet supervision, transport to airport, loading, health certificate, shipping & other documents.
The FoB price excludes:
- sampling, testing, and lab fees are not included because veterinary import requirements are not known
- visit and selection by the buyer are not included
These animals can only be shipped on a freighter aircraft with main deck capacity.
Our company has rich experience and expertise in supplying a wide array of Lead Ore that are used in making electrical equipments, radiators among other industries. They are fabricated using premium-quality raw-materials in compliance with the prevailing industrial standards of quality.
They are offered to clients at affordable rates. The composition varies from client to client. We also export these quality-tested products to our esteemed overseas clients through reliable shipment modes.
Potassium Monopersulfate compound, a white, free flowing crystalline granule, is non-toxic, odorless, and easily soluble in water. It is an efficient, environmentally friendly, and multifunctional acidic oxidant.
General Information
Product Name Potassium Monopersulfate compound
CAS 70693-62-8
Chemical formula 2KHSO5 KHSO4 K2SO4
Molecular weight 614.7
Specification
Appearance White, free flowing granule
Available Oxygen, % 4.5
KHSO5, Â % 42.8
Loss on Drying  % 0.15
Bulk Density, g/L 0.80
pH (10g/L,25 C) 2.0 .4
Sieve Residue on 75 m test sieve, % 90.0
Packaging
Product is packaged in plastic woven bags lined with polyethylene film, with a net weight of 20kg/bag or 50kg, or the packaging form and net content can be determined through negotiation according to customer requirements.
Storage
Store in a cool and well ventilated warehouse to prevent exposure to sunlight, rain, and moisture. Prohibit mixing with reducing substances for storage.
Specifications:
index value
appearance white crystalline powder or flakes
Assay 99.0%
residue on ignition 0.01%
Boiling point 135 c at 1,013 hpa
Moisture 0.25%
Uses:
It is used as raw material for medicine, pesticides, dyes and organosilane coupling agents. It is also useful in the determination of nickel and cobalt. Acetone oxime is an excellent corrosion inhibitor (deoxidant) with lower toxicity and greater stability compared to hydrazine.
Package:
25kg carton drum or 1kg foil bag or by request of clients
South almonds, almonds in China called almonds. South almonds are also called sweet almonds, slightly sweet, which is also a way to distinguish between almond and northern almonds. First divided north and south almonds have so few say.
North almond
Naturally is the northern production of almonds, and also called bitter almonds.
Main features -
1, bitter, must be soaked in water for 3 days to remove bitterness.
2, bitter almonds in the bitter taste of the process of almonds will be a lot of loss, so no almond fragrance.
3, bitter almonds have micro-toxicity (brewing when the need for high temperature hot water brewing, to poison).
4, therapeutic effect and sweet almond the same.
5, almond oil content of about 49%, ground into powder after the powder is relatively wet.
6, due to bitter taste, not many people eat, so bitter almond raw material prices are relatively low.
Product Brief Introduction: with the largest consumption for construction and building materials. It is mainly used as enamel fluxing agent, glass opalizing agent, acid-proof clay, acid-proof concrete coagulator and wood preservative. It can also be used for insecticide.
Product Hazard or Harmful Ingredients:It does not combust or explode but has corrosivity and certain toxicity.
Product Physical Properties:The product is white powder crystals and basically neutral. It is difficult to dissolve in water and acid and the density is 2.37g/cm3.
Product Chemical Properties:It is stable under normal temperature. It does not combust nor explode when it is heated or contacts with redox materials.
Spillage Treatment Method:Simple cleaning and burying
Protection Measures for Product Transport & Storage:To prevent from caking and going bad, it should be kept indoor or be covered with protection materials like canvas and free from the blazing sun.
Other Information: Anti-caking agent can be added at the request of customers.
Technical Specifications
Analysis items Standard
Na2SiF6 99% min
Loss of weight on drying at 105â?? 0.3% max
Free acid (as HCl) 0.1% max
Chloride (as Cl) 0.1% max
Sulphate (SO4) 0.3% max
Iron(Fe) 0.02% max
Water-insoluble matter 0.5% max
Particle size distribution
Passing through 40 mesh sieve 98% min
Passing through 60 mesh sieve 90% min
Passing through 325 mesh sieve 25% max
Commodity : Potassium sorbate
Molecular formula : C6H7KO2
Molecule Weight : 15022
HS code : 29161900
CAS : 24634615Ã?Â
Specifications
appearance : White crystal granule
Production Standard : FCCIV
Content : 9801010
K2CO3 : 1 max
Loss on drying : 1 max
Chloride : 001 max
Heavy metalsas : Pb 0001 max
Packing in carton 25kgs net weight
Quantity 14MT loaded into 1 x 20GP
Excellent preservative properitesproperites Sorbic Acid Potassium Sorbate can restrain effectively the activity of mould yeast and aerophile bateria Restrain growth and reproduction of the pernicious micro organism as pseudomonas staphylococcus salmonella action to restrain growth is more powerful than killing Meanwhile it can not restrain useful microoranganim growth ad Anaerobicbearing barilli acidophil therefore to lengthen food store peroid and remain food original flavor The preservative efficiency of sorbic acid Potassium sorbate is 510 times sodium benzoate
High safety Sorbic Acid Potassium Sorbate is one kind of nonsuturated fatty acid compounds It can be absorbed by human body rapidly then decomposed into CO2 and H2Omoreover no remaining in body ADI 025mgkg based on sorbic acid FAOWHO 1994 LD50 4920 mgkglarge mouse by mouth GRASFDA 1823640 1994 Its toxicity only 112 times table salts and 140 times sodium benzoate
Good stability Sorbic Acid Potassium Sorbate is stable in sealed staus will not be decomposed until 270C It will be oxidized into colored ones and absorbing moisture in case exposed in air for a long time
Wide application At the momentSorbic Acid Potassium Sorbate has been used extensively in food drinkvegetables in soy tabacco drugs cosmetics agricultural products forage and other domain Its applicaion should be wide and wide in the world
As acidic preservative Sorbic Acid Potassium Sorbate is also used well in neutral foodph6065 The preservative efficiency of sodium benzoate will decrease clearly and have a bed taste while ph4
Applicaion flexibilitySorbic Acid Potassium Sorbate can be used by direct adding sprayingretting dry spraying using in packing material and other method
1,Name: Sodium nitrite
Molecular formula: NaNO2
Formula weght:69.00
2Property: (1) ordinary sodium nitrite: white little crystals or light yellow
 (2) dry powder sodium nitrate: white crystal,non-caking, showing loose status.
Density:2.168. No odor, slightly salty. It is liable to deliquesce, dissolved in water,soluble in liquid ammonia,slightly soluble in ethanol and glycerin,Melting Point:271. Decomposition temperature is 320. It has oxidability and also has reducibility. It will slowly be oxidized into sodium nitrate in atmosphere, it can form nitrogen compound with nitrilo at low temperatures.
3Usage:It has been widely used in making nitro-compound and azo dye, mordant of textile dyeing, bleaching agent, metal heat finishing agent, cement early strength agent, and deicing agent etc.
Note: The product should be stored in a cool, dry place to prevent it from moisture, heat and sunlight. This product can not be mixed with strong reductant, inflammable and explosive materials, food, feed and additives. â?¢ This product is toxic and should be properly kept and can not be eaten.
4 Specification: (Technical Standards:GB2367-2006)
Item Unit Molten salt G High G First G Qualified G Dry powder G
Assay % 99.3 99.0 98.5 98.0 98.5
Sodium nitrate % 0.6 0.80 1.00 1.90 0.80
Chlorides % 0.03 0.10 0.17 -- 0.1
Water insolubles % 0.02 0.05 0.06 0.10 0.06
Moisture % 1.0 1.4 2.0 2.5 0.2
Loose degree -- -- -- -- 95
5,Package: net 50kg net each in plasic woven inner plasic bag, or according to customers requirement.
per annum. Price for volume over the MoQ 30 Million boxes is negotiable. Payment by L/C 100% at sight, transferable, irrevocable and confirmed.
Product Name: Disposable Vinyl/Nitrile Blended Examination Gloves
Single use, non-sterile, no measuring, Latex free
Sizes: XS, M, L. XL. XXL
Color: Blue, Green
Structure: 5 fingers, beaded cuff for easy donning, ambidextrous
Surface: Smooth
The Vinyl/Nitrile Blended glove is a new type of synthetic glove that was
developed based on the vinyl glove production technology. Its material is
compounded with PVC paste and Nitrile latex, so the finished production has
the advantage of both PVC and Nitrile gloves.
Comparing with the vinyl gloves, the Vinyl/Nitrile Blended glove can better
satisfy the users demands, it feels softer, more flexible and more
comfortable when wearing.
Intended purpose: The examination glove is disposable non-sterile device
intended for medical purpose that is worn on the examinerâ??s hand or finger
to prevent contamination between patient and examiner.
Medical Device Quality Management System EN ISO 13485 Certificate,
ISO 9001 Quality Management System Certificate - 2 FDA
FDA Registration Information - 510K
Product 510K
Biocompatibility Test Report
EU CE Certificate (DOC, Technical Documentation Review Report
)
- It is manufactured by a flooring manufacturer.
- We manufacture unused flooring materials such as test products and B-grade products.
- This is a product made by crushing flooring materials and turning them into pellets (glash).
- Unused and tested products are recycled and made into pellets by flooring manufacturers.
- currently exporting it as bulking material to Korean flooring and tile manufacturers.
- 1-2 containers per month
