Heavy duty motors with stainless steel shafts and tough thermoplastic bodies.
Totally submersible and ignition protected
To all existing safety standardsBIA, NMMA and ISO/EC regulations
Water cooled motors for long life, with anti airlock design and moisture tight seals
Snap-lock strainer base for easy installation and removal, and silent vibration free running
No burn out if run dry
Pump body: Thermoplastic
Shaft seal: Lip seal
Shaft: Stainless steel
Voltage: 12 V DC/24V DC
Model Delivery Volume Delivery Head Voltage Dc Current Cable Outlet Dia.
AD350-12 350GPH 3m 12V/24V 1.8A/1A 100cm 19mm or 29mm
AD500-12 500GPH 3m 12V/24V 2.2A/1.2A 100cm 19mm or 29mm
AD750-12 750GPH 4m 12V/24V 2.5A/1.5A 100cm 19mm or 29mm
AD1100-12 1100GPH 4m 12V/24V 3.0A/1.5A 100cm 29mm
Model No.:
ZB0620-16
Color: White
Product Name: Plastic Thru Hull Outlets
Size:5/8
Marine Hardware parts & accessories Boat Plastic Thru Hull Fitting Bilge Pump Drain or Vent Hose Fitting Connector for hose
Description:
Our Thru-Hulls are meant for installation through the transom and are ideal for overflow use in live well installations or as an exhaust port for a bilge pump. These thru-hulls are available in a variety of sizes ranging from 5/8 up to 2. Their construction is designed to resist degradation as a result of chemical and saltwater exposure.
Sturdy construction for long lifespan
Easy to install and remove
Simple to use shandong
Payment Type: L/C,T/T
Incoterm: FOB,EXW,CFR,CIF
Transportation: Ocean,Land,Air,Express
Submersible water pump
As a professional manufacturer from china since 1997, we have export our products to more than sixty countries and averagely deliver to more than thirty 20'gp containers per month.
And with
Good quality
Excellent after-sales services
Favorable price
Powerful r&d ability, we believe we would achieve more.
Characteristics:
Suitable for lifting clean water not containing substances
Easy use;
Extremely reliable even when subjected to continuous use, since the motor is fully cooled.;
Particularly suited for domestic use, to drain dirty water in all cases where suspended solids up to 20mm have to be dealt with;
Applications situations: emptying of pools and tanks, disposal of domestic sewage, emptying of sump pits.
Float switches are used to monitor liquid levels by opening or closing when a desired action point is reached. A variety of types are available using mercury and non-mercury tilt switches and, also, permanent magnets and reed switches. Common applications include sumps, pump-control systems, bilge pumps, below ground vaults and irrigation systems.
We are one of the concrete pump manufacturers in Korea
Brand: SAMIL GIANT in Korea
Boom length: 67m 62m 58m 52m 48m 45m 42m 37m 32m 28m 24m 21m
Stationary pump, Line pump
We are able to send full details if you make an inquiry
Submerged pump [1] is a positive pressure conveying vertical pump, which can effectively solve the problem of air resistance and cavitation. The explosion-proof level of the conveyed material determines the submerged pump products with different structure, working principle, classification, scope of application, product advantages and disadvantages and mode of operation, which can be simply divided into two categories of traditional submerged pumps (explosion-proof outside the tank 1 area, 0 area inside the tank is not explosion-proof) and new type of submerged pumps (explosion-proof outside the tank 1 area, explosion-proof inside the tank 0 area).
Submerged pumps are vertical pumps in which the impeller, pump body, and other flow-through parts are submerged in the material being conveyed, and are connected to the motor by a shaft. Submerged pumps are made according to the different needs of reaching into the length of the container. Submerged pump and material contact parts, generally according to the requirements of the material selection, metal and non-metallic materials. Such as 304, 316, 316L, engineering plastics, fluorine plastic and so on.
Diaphragm pumps are designed to protect columns and cylinders by separating the liquid being pumped from the columns and cylinders with the aid of a membrane. The left side of the diaphragm in contact with the liquid are made of corrosion-resistant materials or coated with a layer of corrosion-resistant substances; the right side of the diaphragm is filled with water or oil.
Diaphragm pumps, also known as control pumps, is the main type of actuator, by accepting the control signal output from the regulator control unit, with the help of power operation to change the fluid flow. Diaphragm pump in the control process is to accept the regulator or computer control signals, change the flow of the regulated medium, so that the regulated parameters are maintained in the required range, so as to achieve the automation of the production process. If the automatic adjustment system compared with the artificial adjustment process, the detection unit is the human eye, regulation and control unit is the human brain, then the implementation of the unit - diaphragm pump is the human hand and foot. To achieve the process of a parameter such as temperature, pressure, flow, level and other regulatory control, are inseparable from the diaphragm pump.
Air operated diaphragm pumps are commonly used in five materials: plastic, aluminium alloy, cast iron, stainless steel, Teflon. Electric diaphragm pumps have four materials: plastic, aluminium alloy, cast iron, stainless steel. Diaphragm pump diaphragm according to different liquid media were used nitrile rubber, neoprene, fluorine rubber, PTFE, PTFE, etc. placed in a variety of special occasions, used to pump a variety of media to meet the needs. [2].
Slurry pump refers to speak refers to through the use of centrifugal force (pump impeller rotation) role of solid, liquid mixed media energy increase of a mechanical, electrical energy into the medium of kinetic energy and potential energy of the equipment. Mainly used in: mining, power plants, dredging, metallurgy, chemical industry, building materials and petroleum and other industry sectors.
Slurry pump conveys a mixture of solid particles containing dross and water. But from the principle of slurry pump belongs to a centrifugal pump, in the iron and steel enterprises are mainly used for converter dust water, blast furnace gas scrubbing water, continuous casting turbid ring water and rolling steel turbid ring water and other systems of slurry transport.
Salient Features
Highly efficient 3-Phase Water Filled Motor
- 100% EC grade copper winding
- Easily Rewindable
- Motor Designed with Higher Cooling Effect Ensures Longer Life
- Sustainable uniform performance for years
- Ensures long life durability
- Optimized Hydraulic & Mechanical Design
- Improved efficient performance
- Excellent output in Low Radiation
- Dynamically balanced design
- Zero maintenance
Product Specification
Power Range : 3.0 HP to 10.0 HP
Operating Speed : 0 - 2890 RPM
Operating Frequency : 0 â?? 50 Hz
Input Solar DC Power Range : 3000 Wp, 10000 Wp
Input Solar DC Voltage Range : 330 Vmp , 600 Vmp
Head Range : 10 Mtr , 50 Mtr
Discharge Range : 126000 LPD , 425000 LPD
Type of Duty : S1
Material Of Construction
Part Grade
Oil Seal : Nitrile butyl rubber
Motor Shaft : SS - 420
Motor Body : Cast Iron / J4
Motor Bush : LTB-4 / Teflon
Thrust bearing assembly : SS - 420 & Carbon
Base : Cast Iron
Bracket : Cast Iron
Flange : Cast Iron
Casing : Cast Iron
Impeller : Cast Iron
Highly efficient 3-phase Air Cooled motor
- 100% EC grade copper winding
- Easily Rewindable
- Good suction lift characteristics
- Sustainable uniform performance for years
- Ensures long life durability
- Optimized Hydraulic & Mechanical Design
- Improved efficient performance
- Excellent output in Low Radiation
- Dynamically balanced design
- Double shielded ball bearings, so no need of external lubrication
- Mechanical seal or stuffing box is provided as per customers requirement
- Zero maintenance
Product Specification
Power Range : 1.0 HP to 10.0 HP
Operating Speed : 0 2890 RPM
Operating Frequency : 0 - 50 Hz
Input Solar DC Power Range : 900 Wp, 10000 Wp
Input Solar DC Voltage Range : 110 Vmp, 600 Vmp
Head Range : 10 Mtr, 50 Mtr
Discharge Range : 45000 LPD - 405000 LPD
Max. Suction Head : 7 Mtr
Type of Duty : S1
Material Of Construction
Part Grade
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium
