Sewage Pump

Sewage Pump - B

Submersible sewage pump
Technical parameter:
Model: qwb,
Discharge: 5 to 6000 m3/h (1.4-1666.7l/s)
Lift head: 6 to 80 m (19.7- 262.5 feet)
Max. Rotary speed: 2900 r/min
Pump outlet diameter: 50-600mm (2-23.6 inch)
Temperature: -5 to +50 deg. C
Maximum system pressure:

Submersible sewage pump
Technical parameter:
Model: qwb,
Discharge: 5 to 6000 m3/h (1.4-1666.7l/s)
Lift head: 6 to 80 m (19.7- 262.5 feet)
Max. Rotary speed: 2900 r/min
Pump outlet diameter: 50-600mm (2-23.6 inch)
Temperature: -5 to +50 deg. C
Maximum system pressure:

Application Transferring sewage and wastewater to wastewater treatment plant. Dewatering waste water from industrial plant (e.g. petrochemical plant. etc) Pumping wastewater explosive atmospheres likely to present Operating

Pump range:
Capacity: 8 8980 m3/h
Head: 3 60 m
Speed: 495 / 590 / 730 /980 /1470 / 2940 rpm
Power: 11kW 580kW
Voltage: 380V, 6kV or 10kV
Discharge Dia.: DN65 DN 1000
Medium Temp.: â?¤ 40 Degree
Pump Weight: 128 10000 kg

Description:
The submersible sewage pumps can meet the needs in the aspects of municipal engineering such as flood control pumping station and integrated pumping station, building construction, industrial sewage, waste water treatment, environmental protection, irrigation etc. They can be used to convey sewage, wastewater and urban sewage which contain solid particles and various long fibers.
Our submersible sewage pump can be installed by auto-coupling device (QDC), hard pipe and soft pipe, fixed and movable installation, and dry type installation with cooling jacket.

Detailed product description

Model: qwb, qzb

Discharge: 5 to 6000 m3/h (1.4-1666.7l/s)

Lift head: 6 to 80 m (19.7- 262.5 feet)

Max. Rotary speed: 2900 r/min

Pump outlet diameter: 50-600mm (2-23.6 inch)

Temperature: -5 to +50 deg. C

Maximum system pressure: <1 mpa

Ph value: 2 to 13

Dia. Of passing solid particle: 30-100mm (1.2-3.9 inch)

Maximum immerging depth: 10m (32.8 feet)

Motor power: 1.5 to 400 kw

Performance & advantages:

1) reliable performance

2) high quality, easy operation, applying non-clog impeller, needn¡¯t the pump station.

3) many other special technical innovations: smaller volume, lower noise, saving more energy, easy maintenance, etc

4) with a fully automatic safety protection control cabinet to monitor the operation of the pump.

5) multi-mechanical sealing, high wearability and anti-corrosion material for the friction components, and can run for 6000 hours continuously.

6) with high sensitivity water leakage monitor sensor in the sealing chamber and thermal sensor pre-set in the stator



In wooden box

QW/WQ Submersible Sewage Pump Application:
Municipal works, Industrial buildings
Hotels, Hospitals, Civil air defence
Drain off the sewage, waste water, rainwater and living water containing solid grains and various long fabrics

QW/WQ Submersible Sewage Pump Feather:
1. ) Impeller: With single-channel or double-channel impeller, which is similar to an elbow of the same section, the pump is particularly suitable for the medium containing solid particles( particle size: 50% pump flange size).

2. ) Mechanical seal: Double-channel mechanical seal in series(doule seal type), with durable wear and corrosion resisting seal material.
Motor side: Ceramic/Ceramic
Pump side: Silicon carbide/Hard Alloy

3. ) Bearing. Three sets. One at the motor side and two at the pump side. SKF and NTN type bearing available if request.

4. ) Oil and water probe: Once the mechanical seal damages and water comes insides, the probe will send out signal to make the protection action.

5. ) Float switch: If request, with pump control cabinet, the float switch can automatically control the pump stop/start according to the water level

6). Movable and fixed installation optional, and double guide automatic rail available.

7. ) Motor: Insulation class: Class F, and protection class 58

Capacity range(m3/h) 5---3000
Head range(m3/h) 7---60
Outlet size(mm) 25---500
Power(kw) 0.75---250

Material: Cast iron, SS302,SS304,SS316
Shaft seal(mechanicalseal) SIC,TC, ceramic,graphite...

Temp up to 120 degree
PH 3-11

Installation Movalbe or auto coupling type
Water leakage probe
float switch.

Non-clog sewage pump

Adc

00

ASP2010 series self-priming sewage pump is a new production which is developed according to the latest technology home and broad.Pump has single stage,single suction,horizontal,gas-liquid mixed type.

Performance Range
Discharge diameter: 300mm
Capacity: 130 to 210 to 250 m3/h
Head: 29 to 27 to 23m
Speed: 1480r/min
Motor power: 30kW
Max.solid particle: less than 85mm
Specific gravity: less than 1.0~1.3