Main body
High-strength engineering plastic rack, light,
Beautiful and corrosion resistant
Scope of application
Adult, child
Gas source
O2: 0.27--0.55mpa n2o: 0.27--0.55mpa
Flow meter
O2 : 0.1--1.0l/min 1.1--10l/min
N20: 0.1--1.0l/min 1.1--10l/min
Air : 0.1--10l/min
O2, n2o linkage and n2o stopper
When using nitrous oxide, oxygen concentration>25%;
When the oxygen pressure
Clinician-inspired solutions help improve patient care
Features
- Enhanced monitor integration capabilities with our Datex-Ohmeda Anaesthesia Monitor and Compact Anaesthesia monitor
- Lightweight and compact for easy manoeuvrability
- Optional integrated auxiliary O2 flowmeter and suction control
General Specifications:
Dimensions
- Height: 134.5 cm/52.9 in
- Width: 72 cm/28.3 in
- Depth: 73 cm/28.7 in
- Weight: Approximately 108 kg/238 lb.
Top shelf
- Weight limit: 34 kg/75 lb.
- Width: 66 cm/26 in
- Depth: 40 cm/15.75 in
Work surface
- Height: 81.7 cm/32.2 in
- Size: 2160 cm-2/334 in-2
DIN rail
- Side of machine: 34.5 cm/13.6 in
Drawers (internal dimensions)
- Height: 17.5 cm/6.9 in
- Width: 33 cm/13 in
- Depth: 26.5 cm/10.4 in
Absorber bag arm (optional)
- Arm length: 30.5 cm/12 in
- Bag arm height (adjustable): 87 cm (34.3 i) to 104 cm (40.9 in)
Casters
- Diameter: 12.5 cm/5 in
- Brakes: Individual locking front casters
Electrical Specifications
Current leakage
- 100/120 V: < 300¼A
- Power
- Power input: 100-120 Vac, 50/60 Hz
- Power cord: Length: 5 m/16.4 ft.
- Rating: 15A @ 120 Vac
Pneumatic Specifications
Auxiliary common gas outlet
- Connector: ISO 22 mm OD and 15 mm ID
Gas supply
- Pipeline input range: 240 kPa to 600 kPa/35 psig to 88 psig
- Pipeline connections: DISS-male, DISS-female, DIN 13252, AS4059, S90-116 or NIST (ISO 5359). All fittings available for O2, N2O, and Air, and contain pipeline filter and check valve.
- Cylinder input: Pin indexed in accordance with CGA-V-1 or DIN (nut and gland); contains input filter and check valve
Note: Maximum 3 cylinders; two inboard mounted, one outboard mounted.
- Primary regulator diaphragm minimum burst pressure: 2758 kPa/400 psig
- Primary regulator nominal output: < 338 kPa/49 psig Pin indexed cylinder connections
- < 407 kPa/59 psig DIN cylinder connections
Environmental Specifications
System operation
- Temperature: 10° to 40°C/50° to 104°F
- Humidity: 15 to 95% relative humidity (non-condensing) per IEC 68-2-3
- Altitude: -440 to 3565 m/500 to 800 mmHg
System storage
- Temperature: -15° to 50°C/-5° to 122°F
- Humidity: 10 to 95% relative humidity (including condensing) per IEC 68-2-3
- Altitude: -440 to 5860 m/375 to 800 mmHg
- Oxygen cell storage:
-15° to 50°C/5° to 122°F
10 to 95% relative humidity
500 to 800 mmHg
Electromagnetic compatibility
- Immunity: Complies with all requirements of EN 60601-1-2
- Emissions: CISPR 11 group 1 class B
- Approvals:
UL 2601-1
CSA C22.2 #601.1
EN/IEC 60601-1
CE 0197
Ce approved portable anesthesia machine
Compact light-weight and portable, could be transported by pull-rod case, put on table and assembly on the trolley.
Jackson or bains absorber is available
Specifically designed to accomodate low flow
Selectatec-bar and quick change vaporizer mounting device
Visible inspiration and expiration valve
Could upgrade to oxygen&n2o or oxygen&air flow meter freely
Module rack with polyester medical material with superior spray technology, high strength and light weight.
With transport case, convenient to take and transport
Easy to disassemble and assemble all the components, convenient for clean and maintenance.
Medical air compressor
Low noise medical air compressor, very stable performance, safe and reliable
Air compressor with lcd screen to display output pressure, provide safe, secure and permanent motivation
Compact design and easy to transfer
Assembled with clean control module, supplying cleaner and safer air to the patients
Effective sound-absorbing materials
Oil-free compressor with temperature protection
Match with various ventilator of international standard in the world
Display: 10.4 TFT color screen
Application: Adult, Pediatric
Driven mode: Pneumatically driven electronically controlled
Mode: Semi~open, Semi~closed or closed system
Anesthetic vaporizer: two high precise vaporizers
Power supply: 220V,10%, 50Hz,1Hz
10V,10%, 60Hz,1Hz
Internal battery: DC12V (4 working hours)
Fresh gas outlet is in front of frame
3 Gas (Oxygen, N2O & Air) Anesthesia Machine
7" Touch Screen Display
Frame made up of MS Powder Coated
Tidal Volume - 50-1500 ML
Modes - CMV. ACMV, SIMV, PLV, Bag & Standby
PEEP & FiO2 Monitoring
2 Hours battey back up
The Anesthesia machine makes a good performance in Intensive Care Units (ICU), Operation room, Anesthesiology Department and other departments. From high to low acuity, simple to complex cases, pediatric to geriatric patients, Superstar Medical Anesthesia Systems offer you the choices you need in ventilation, monitoring and technique. whatâ??s more, our expertise in anesthesia delivery and ventilation is based on rich 23-year history of developing anesthesia solutions that meet your needs. Good performance based on High Security, High Accuracy, High Stability and accurate monitoring.
Product Description
1. The comprehensive ventilation modes including PCV-VG, SIMV-PC provide more flexibility to ventilation strategy, suitable for various patients operation
2. Support both low-flow anesthesia and minimal-flow anesthesia
3. Electronic flow-meter, precise control and convenient operation
4. 12.1" TFT LCD with color touch screen, highlighted display
5.Certification: CE, ISO9001, ISO13485
Product Name
8700A Medical Anesthesia Machine
Control Screen
12.1", TFT color touch screen
Batteries and Operation time with fully charged
DC24V, minimum.120 minutes
Gas supply
O2, N2O, AIR; 280kPa - 600kPa
Cylinder yokes
O2, N2O, AIR
Fresh gas flow indicator
Electronically display and virtual fresh gas flow tubes
Ventilator
Electronically controlled, pneumatically driven
Compensation
Compliance and Leak compensation, fresh gas compensation, altitude compensation
Monitoring
FiO2, Ppeak, Pplat, Pmean, PEEP, MV, Vti, Vte, Freq., Compliance, Resistance
Graph Display
P-t, F-t, P-V, V-t, Paw-V Loop, V-Flow Loop, optional CO2-t
Optional
CO2 module, Anesthetic gas module, ACGO, AGSS and so on
CE, ISO 13485 and Rohs certificates
Pneumatically driven and electrically controlled system
Built-in ventilator, LED display screen
Closed; Semi-Closed; Semi-Open wotking mode
Applied for Adult and Pediatric
Main technical specifications:
Gas requirement: Medical oxygen and nitrous oxide with a pressure ranging from O2 & NO2: 0.32~0.6 MPa.
2-tubes Flowmeters, O 2 & N 2 O; 0.1L/Min ~ 10L / Min;
Oxygen Flush: 25~75 L / Min
Respiration Mode: A/C,IPPV,SIPPV,MANUAL
Tidal Volume: 50~1500ml
I/E Ratio: 1:1.5 ~ 1:3.0
One vaporizers: Enflurane/ Isoflurane/Sevoflurane/Halothane
Vaporizer Setting Range: 0.5%~5%
Respiration Frequency : 4~40 bpm;
Ptr: -1.0kPa ~ 1.0 kPa
CO 2 absorber capacity : 1 kg
Optional: Patient monitor
Alarm parameters: upper/lower limit of airway pressure,tital volume exceed limitation,no tidal volume output,apnea,
AC power malfunction,Battery low power
Features
Operating Modes: Pneumatically driven & electronically controlled, closed, semi-closed and semi-open
Anesthesia Ventilator: Built-in ventilator, LED display screen
Standard integrated metallic modular respiratory circuit; completely solves the problem of gas sealing under high temperature disinfection, easy to clean and disinfect
Equipped with electronic pressure differential flow sensor, imported respiratory control valve
Vaporizer: Imported tank components assembled locally; Enflurane, Isoflurane and Sevoflurane (Halothane optional). Also possesses self-compensating functionality
Multi-parameter Patient Monitor: Optional
High precision four tube flowmeter, fitted with interlocking oxygen-nitrous oxide supply, guarantees oxygen output is never lower than 21%
Nonhazardous environmentally friendly frame, with automated self-checking function during startup and an automatic self-calibrating sensor
Power Failure Support Functions: Automatically converts to backup power mode during AC power outages
Alarms: Audible and/or visual alarms for tidal volume, airway pressure, asphyxia, power failure, oxygen failure and other alarms, also features a alarm query function
Equipped with advanced international rotating Na-lime tank, uses imported PPSU material and temperature resistant to 134°C
Pressure-Volume and Flow-Volume, displayed waveforms can be cycled instantly with a touch of a button
3.Standard integrated metallic modular respiratory circuit; completely solves the problem of gas sealing under high temperature disinfection, easy to clean and disinfect
4.Power Failure Support Functions: Automatically converts to backup power mode during AC power outages
5.Equipped with electronic pressure differential flow sensor, imported respiratory control valve, stable and reliable, rapid response time
6.High precision five tube flowmeter, fitted with interlocking oxygen-nitrous oxide supply, guarantees oxygen output is never lower than 21%
7.Nonhazardous environmentally friendly frame, precise construction, elegant design, equipped with automated self-checking function during startup and an automatic self-calibrating sensor
8.Alarms: Audible and/or visual alarms for tidal volume, airway pressure, oxygen concentration, asphyxia, power failure, oxygen failure and other alarms, also features a alarm query function
9.Vaporizer: Imported tank components assembled locally; Enflurane, Isoflurane and Sevoflurane (Halothane optional). Also possesses self-compensating functionality
10.Advanced and stable Adjustable Pressure Limiting (APL) valve, suitable for low and ultra low flow anesthesia
11.Equipped with advanced international rotating Na-lime tank, easy-operate, requires only one hand, and uses imported PPSU material and temperature resistant to 134�°C
Ventilation method: Closed, half-closed, half-open
Small and compact unit ideal for office based anesthesia
Two-gas machine( N2O&O2 )
Mechanical Anti-Hypoxic Device and O2/N2O interlock
External CO2 circle absorber system
Vetilator (option): TH-1, TH-1 A
YJ-8501 Anesthesia Machine is equipped with an accurate dedicated anesthetic vaporizer and a safety device for preventing cyanosis and a necessary alarm system. During the anesthesia, the patient's respiratory functions can be managed by using a microcomputer controlled pneumatic electrically controlled synchronizing anesthesia respirator. Each connection part of the whole machine is a standard interface. A highly efficient and large volume soda lime absorber can minimize the re-inhalation of carbon dioxide by the patient.
Pneumatically driven and electrically controlled system
Built-in ventilator, 8.4 LCD display screen
Closed; Semi-Closed; Semi-Open working mode
Applied for Adult and Pediatric
Main Specification:
* Working Mode: Closed system, half-closed system and half-open system
* Application: adult ú¼childú¿optionsú¬
* Gas supplies: O2: 0.3MPa~0.5MPa, N2O: 0.3MPa~0.5MPa
* Oxygen flush: 35L/min~75L/min
* Alarms Parameters: Upper and Lower Airway Pressure Alarm; Upper and Lower Tidal Volume Alarm; Lack of Oxygen Alarm; Apnea; Power Outage
* High precise vaporizer: Enflurane or Isoflurane
* Power: 220Ví+10úÑíó50Hzí+1úÑ
WMV680D Equine Anesthesia Machine is designed for use with Equine. Bovine. Zoology. and other large animal anesthesia techniques
PRODUCT DETAILS
Feature:
Respiration mode:Manual.open.closed.semi-open and semi-closed mode
Gas source:O2.0.3--0.4Mpa
O2 Flush:25L/min- -75L/min
Flow meter:high precision O2 flow meter. 0--1L/min--10L/min. O2&N2O or O2&N2O two tubes flow meter is option.
CO2 circle absorber: With soda lime chamber. APL valve. airway pressure gauge. inspiration valve and expiration
valve. the inspiration and expiration valve is demo-type and visible.
Airway pressure gauge: -20cmH2O--100cmH2O &-2Kpa--10Kpa
APL valve:adjustable easily. range:0-60cmH20
Soda lime chamber: 8Liter. it is easy to change soda lime and used for over 1000kg animal
Three methods: Table top and trolley and wall mounting arm. trolley is optional and wall mounting arm is optional
Bains connector: It is used for open breath circuit. connect with Jackson breath circuit or bains breath circuit.
Back bar: Supply selectatec compatiable mounting bar.ISO 23mm is compatiable
Anesthesia vaporizer: TEC3 vaporizer. Enflurane. Isoflurane. Halothane. Sevoflurane. one vaporizer with selectatec compatiable mounting bar. Cage mounting vaporizer is compatiable.
Trolley: There is a trolley to transport it.The trolley is optional.
Tidal Volume: 5000-15000ml
Standard configuration
Anesthesia machine with vaporizer,Disposable breath circuit,� Reserve bag
O2 gas source pipeline,Stand
