Find Verified A860 Wphy 70 Equal Tee 30Inch Wt:70Mm Suppliers, Manufacturers and Wholesalers

Cold-drawn tee is a section of main pipe plus a small branch pipe. Obviously, two large sizes are main pipe, and the small size is branch pipe. In pure oxygen pipeline, there is usually pressure, at this time oxygen activity is greater. If cold-drawn tee is used, as long as the impurities in the tube move with oxygen flow, the change of flow velocity may cause impurities and pipes. The ignition of pure oxygen tubes may be caused by collision with the source of ignition or by electrostatic discharge due to the change of flow rate.

The processing method of cold-drawn tee pipe fittings is to mark the cold-drawn tee where the pipeline is to be processed and break through the mark.

Special equipment for cold-drawn tee pipe fittings: install ejection device on the pipe, which includes metal, jack, commutator, bracket, etc. When the metal rod is heated and the jack and metal rod are ejected outwards, the cold-drawn tee blank formed by the natural outward extrusion of the pipe wall material; and then weld a certain length of the corresponding specifications on the cold-drawn tee blank formed by the ejection, and give birth to the cold-drawn tee blank. Output of final products.

Product Details:
Material Grade : CARBON
Application : Plumbing Pipe
Size : 1 inch
Color : Black
Country of Origin : Made in India
ASTM A234 Carbon Steel Pipe Bend / Piggable Bend
RANGE :
2\\\\\\\\\\\\\\\"NB TO 18\\\\\\\\\\\\\\\"NB IN SCH: 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
TYPE :
SEAMLESS / WELDED/ FABRICATED
Form : Long radius Bend, Piggable Bend, Hot bend, With R=3D, 5D, 6D, 8D, 10D Customized Bend
Offer : Minimum Wall Thinning rate Ovality, No Wrinkles
Piggable Bend
Alloy Steel Piggable Bend
ASTM A 234 WP-P5, P9, P11, P12, P21, P22 P91
Carbon Steel Piggable Bend
ASTM A 234 WPB,
Low Temperature Carbon Steel Piggable Bend
ASTM A 234 WPB
Grade Specification: Carbon Steel: ASTM/ASME A234 WPB / A860 â?? MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A420 WPL6

Product Details:
Material Grade CARBON
Application Plumbing Pipe
Size 1 inch
Color Black
Country of Origin Made in India
ASTM A234 Carbon Steel Pipe Bend / Piggable Bend
RANGE :
2"NB TO 18"NB IN SCH: 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
TYPE :
SEAMLESS / WELDED/ FABRICATED
Form : Long radius Bend, Piggable Bend, Hot bend, With R=3D, 5D, 6D, 8D, 10D Customized Bend
Offer : Minimum Wall Thinning rate Ovality, No Wrinkles
Piggable Bend
Alloy Steel Piggable Bend
ASTM A 234 WP-P5, P9, P11, P12, P21, P22 P91
Carbon Steel Piggable Bend
ASTM A 234 WPB,
Low Temperature Carbon Steel Piggable Bend
ASTM A 234 WPB
Grade Specification: Carbon Steel: ASTM/ASME A234 WPB / A860 MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A420 WPL6

Product Details
Diameter 12 Nb to 24 Nb
Grade Carbon Steel Alloy Steel
Color Black Japan Silver
Material Grade B A106
Application Chemical Fertilizer Pipe
Size 12 NB to 24 NB
Black Black Japan
ASTM A234 Carbon Steel Reducers ASTM A234 Reducers Concentric Eccentric Reducers Looking for ASTM A234 Reducers in specific standards size at Factory Rate
Cromonimet is manufacturers of ASTM A234 Reducers and supply high quality ASTM A234 Reducers in both large and small quantities worldwide offer you the best prices in the market
We can also offer customized packaging for ASTM A234 Reducers as per customers requirement
Grade Specification Carbon Steel ASTMASME A234 WPB A860 MSSSP75 WPHY 42 46 52 56 60 65 70 Low temperature Steel A420 WPL3 A420 WPL6

Product Details:
Diameter 1/2\\\\\\\" Nb to 24\\\\\\\" Nb
Grade Carbon Steel, Alloy Steel
Color Black Japan, Silver
Material Grade B, A106,
Application Chemical Fertilizer Pipe
Size 1/2\\\\\\\" NB to 24\\\\\\\" NB
Black Black Japan
ASTM A234 Carbon Steel Reducers ASTM A234 Reducers â?? Concentric Eccentric Reducers Looking for ASTM A234 Reducers in specific standards size at Factory Rate?
Cromonimet is manufacturers of ASTM A234 Reducers and supply high quality ASTM A234 Reducers in both large and small quantities worldwide offer you the best prices in the market.
We can also offer customized packaging for ASTM A234 Reducers as per customerâ??s requirement.
Grade Specification: Carbon Steel: ASTM/ASME A234 WPB / A860 â?? MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A420 WPL6

Product Description - "Stainless Steel:ASTMA403 WP 304/ 304L/304H/316/3 l 6L/ 317 I 317L/ 321/ 31 O/ 347/904Letc.
Carbon Steel:ASTMA234 WPB/A420 WPL3/A420 WPL6/ MSS-SP-75 WPHY 42/46/52 /56/60/65/70
Alloy Steel:ASTMA234WP1/WP5/WP9/WP11/WP22/WP91 e"

Product origin - MUMBAI

Key Specifications/Special Features - "Others: Monel, Nickel, lnconel, Hastelloy, Copper, Brass, Bronze, Titanium, Tantalum, Bismuth,
Aluminium, High Speed Steel, Zinc, Lead, Duplex Steel, etc.
Types: Elbow, Tee, Reducer, Return Bends, Stub-Ends, Cap, Collar, Cross, Insert etc.
Size: 1/4"" NBTO 32"" NB. (Seamless & Welded)
Wall Thickness: Sch. SS To Sch. XXS.

Minimum Order Size and Packaging details - 35

Our range of Butt Weld Equal Tee is available in various grades:
Stainless steel astm, a403, wp304 / 304l / 304h / 316 / 316l / 317 / 317l / 321 / 310 / 347 / 904l
Carbon steel astm, a234, wpb / a420, wpl3 / a420, wpl6 / mss-sp-75, wphy 42 / 46 / 52 / 56 / 60 / 65 / 70 Alloy steel astm a234 wp1 / wp5 / wp9 / wp11 / wp22 / wp91
Other metals offered for making butt weld pipe fittings : monel, nickle, inconel, hastalloy, copper, brass, titanium
Size 1/8 nb to 48 nb (seamless & welded) wall thickness -sch. 5s to sch:xxs.

Butt Weld Reducing Tee are available as per the following specifications:-
Size 1/8 NB TO 48 NB (seamless & welded)
Wall thickness -Sch.5S to Sch:XXS.
Grades Offered :-
Stainless Steel ASTM, A403, WP304 / 304L / 304H / 316 / 316L / 317 / 317L / 321 / 310 / 347 / 904L
Carbon Steel ASTM, A234, WPB / A420, WPL3 / A420, WPL6 / MSS-SP-75, WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70
â?¢ Alloy Steel ASTM A234 WP1 / WP5 / WP9 / WP11 / WP22 / WP91

Other Metals offered for making butt weld pipe fittings : Monel, Nickle, Inconel, Hastalloy, Copper, Brass, Titanium.

Product:ASME Socketweld threaded fittings tee
Brand:Renaissance Pipe Fitting Inc.
Sizes:Refer the specification
Condition:New
Rating:4.4, based on� 49� reviews
price:Start from� 20� USD



Standard : ANSI/ASME, MSS, JIS, DIN, BS etc.




TYPE :
Socket Weld (S/W) & Screwed (SCRD) â?? NPT, BSP, BSPT
RANGE :
Forged Fittings 15 NB to 100 NB in 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS available with NACE MR 01-75.
FORM :
Equal Tee, Reducing Tee, Cross Tee,
Stainless Steel Forged Tee :
Standard� : ASTM / ASME A/SA 182
Grade� : F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L
Duplex Steel Forged Tee :
Standard� : ASTM / ASME A/SA 182
Grade� : F 44, F 45, F51, F 53, F 55, F 60, F 61
Aluminium Forged Tee :
Standard� : ASTM B247, B361.
Grade� : 2024, 6061, 6063, 6101, 7075.
Titanium Forged Tee :
Standard� : ASTM B381.
Grade� : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23
Carbon Steel Forged Tee :
Standard� : ASTM A 105/A694/ A350 LF3/A350 LF2.
Grade� : F42/46/52/56/60/65/70
Low Temperature Carbon Steel Forged Tee :
Standard� : ASTM A 350 LF2 / A350 LF3
Alloy Steel Forged Tee :
Standard� : ASTM A182
Grade� : F1/F5/F9/F11/F22/F91
Copper Alloy Forged Tee :
Standard� : ASTM / ASME SB 61 / 62 / 151 / 152.
Grade� : UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640
Nickel Alloy Forged Tee :
Standard� : ASTM / ASME SB 564 / 160 / 472
â?¢ Nickel 200 â?? UNS N02200 � � â?¢ Nickel 201 â?? UNS N02201 � � â?¢ Monel 400 â?? UNS N04400
â?¢ Monel K500 â?? UNS N05500 � � â?¢ Inconel K600 â?? UNS N06600 � � â?¢ Inconel 601 â?? UNS N06601
â?¢ Inconel 625 â?? UNS N06625 � � â?¢ Inconel 800 â?? UNS N08800 � � â?¢ Inconel 800H â?? UNS N08810
â?¢ Inconel 825 â?? UNS N08825 � � â?¢ Hastelloy C276 â?? UNS N10276 � � â?¢ Alloy 20 â?? UNS N08020
Other :
â?¢ Hydraulic Fittings � � � � â?¢ Instrumentation Fittings
Test Certificate :
Manufacturer Test Certificate as per EN 10204 / 3.1


 
Types Of Forged Tee



â?¢
SS 310 / 310S Forged Tee
â?¢
Duplex Steel UNS S31803 Forged Tee




â?¢
Stainless Steel 304 / 304L Forged Tee
â?¢
Duplex Steel Forged Tee


â?¢
Stainless Steel 316 / 316L Forged Tee
â?¢
Duplex Steel UNS S32205 Forged Tee


â?¢
Stailess Steel 321 / 321H Forged Tee
â?¢
Super Duplex UNS S32750 Forged Tee


â?¢
Monel 400 Forged Tee
â?¢
Hastelloy C276 Forged Tee


â?¢
SS Forged Tee
â?¢
Steel Forged Tee


â?¢
Inconel 625 Forged Tee
â?¢
Alloy 20 Forged Tee


â?¢
Cu-Ni 70/30 (C71500) Forged Tee
â?¢
Cu-Ni 90/10 (C70600) Forged Tee


â?¢
ASTM A105 Forged Tee
â?¢
ASTM A350 LF2 / LF3 Forged Tee


â?¢
Inconel 600 Forged Tee
â?¢
Hastelloy B2 Forged Tee


â?¢
SS 317 / 317L Forged Tee
â?¢
Super Duplex Forged Tee


â?¢
SS 347 Forged Tee
â?¢
Super Duplex UNS S32950 Forged Tee


â?¢
Monel K500 Forged Tee
â?¢
Hastelloy C22 Forged Tee


â?¢
Stainless Steel 446 Forged Tee
â?¢
ANSI Forged Tee


â?¢
Inconel 718 Forged Tee
â?¢
904L Forged Tee


â?¢
Incoloy 800 Forged Tee
â?¢
Titanium Gr 2 Forged Tee


â?¢
Incoloy 825 Forged Tee
â?¢
Titanium Gr 5 Forged Tee








RFP India is one of the leading Suppliers, Manufactures and Exporters and offers one of the highest standard qualities of Forged Tee Fittings. Comes in different forms â?? Equal Tee, Unequal Tee and Reducer Tee, these threaded tees are a kind of pipe fittings that has a T-shaped by means of two open outlets on it. These outlets are at a 90 degree point for to join the concrete main pipe line. Obtainable in different specifications, sizes, grades and thickness, these forged tees are widely used in diverse application in industries such as chemical processing, petrochemical, oil & gas, and so on.

We are one of the most trusted manufacturer and supplier of copper fittings and flanges in India. We offer wide range of copper fittings comprises of copper flanges, copper pipe fittings, copper tube fittings and copper forged fittings which provide an economic and efficient method of changing directions in a wide spectrum of domestic and commercial applications ranging from air conditioning, refrigeration, heating, fluid distribution, air pressure lines and plumbing etc. Our fittings have no rough surfaces, present a neat appearance, heat more rapidly, and provide better flexibility to the installer to install and join the copper tube at appropriate place.

Grade:

â?¢ ASTM / ASME SB 61 UNS NO. C 92200
â?¢ ASTM / ASME SB 62 UNS NO. C 83600
â?¢ ASTM / ASME SB 151 UNS NO. 70600, 71500, C 70600 (cu-ni-90/10), C 71500 (cu-ni-70/30),
â?¢ ASTM / ASME SB 152 UNS NO. C 10100, C 10200, C 10300, C 10800, C 12000 & C 12200.


Specifications:

Fittings: (butt weld, socketweld & threaded) 45 deg elbow, 45 deg long bend, 90 deg elbow, 90 deg long bend, 180 deg u bend, concentric reducer, eccentric reducer, equal tee, unequal tee, end cap / pipe cap, union, nipple, swage nipple, full & half coupling, cross, plug, bush, etc.Flanges: Slip-On (SORF), Blind (BLRF), Socket weld (SWRF), Weldneck (WNRF), Screwed (SERF), Lapped Joint (LJFF), Weldneck Ring Joint (WNRTJ), Long Weld Neck, Orifice, Spectacle Blind, Ring Joint, Threaded, etc.
Fittings: 15 mm NB to 600 NB in schedule 5, 10, 20, 30, 40, 80, etc
Flanges: 15 mm NB to 600 mm NB in 150#, 300#, 600#, 900, 1200#, Table D, Table E, Table F, Table G
Test Certificate: MTC, TC from government approved Laboratory under Third Party Inspection.

Astm a53 gr.B equal tee

Elbow product 45deg 90ddeg 180deg elbow, equal tee, reducing tee, concentric eccentric reducer, cross, cap, stud end, cap, bend pipe
Size 1/2''~ 24''(seamless), 4'' to 78'' (welded)
Thickness Sch 5s~xxs
Standard Asme b16.9, jis, din, en, iso, etc
Usage Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc
Material carbon alloy stainless duplex stainless nickel monel inconel incoloy hastelloy nimonic steel astm a234 a860 a420 a403 a815 b366 pipe fittings elbow tee reducer cap bend cross weldolet
A234 pipe fittings, a860 pipe fittings, a403 pipe fittings, pipe fittings,
Carbon pipe fittings, stainless pipe fittings, duplex pipe fittings, alloy pipe fittings,
Elbow, tee, reducer, cap, cross, coupling, a234 elbow, a860 elbow, a403 elbow,
A860 wphy 56 elbow, a860 wphy60 elbow, a860 wphy65 elbow, ss304 elbow, ss304l

Elbow Product 45Deg 90Ddeg 180deg elbow, Equal Tee, Reducing Tee, concentric eccentric reducer, cross, cap, stud end, cap, bend pipe
Size 1/2''~ 24''(seamless), 4'' TO 78'' (welded)
thickness SCH 5S~XXS
Standard ASME B16.9, JIS, DIN, EN, ISO,etc
Usage Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc
material carbon alloy stainless duplex stainless nickel monel inconel incoloy hastelloy nimonic steel Astm a234 a860 a420 a403 a815 b366 pipe fittings elbow tee reducer cap bend cross weldolet
a234 pipe fittings, a860 pipe fittings,a403 pipe fittings,pipe fittings,
carbon pipe fittings,stainless pipe fittings,duplex pipe fittings,alloy pipe fittings,
elbow,tee,reducer,cap,cross,coupling,a234 elbow,a860 elbow,a403 elbow,
a860 wphy 56 elbow, a860 wphy60 elbow,a860 wphy65 elbow,ss304 elbow,ss304l

Elbow product 45deg 90ddeg 180deg elbow, equal tee, reducing tee, concentric eccentric reducer, cross, cap, stud end, cap, bend pipe
Size 1/2''~ 24''(seamless), 4'' to 78'' (welded)
Thickness Sch 5s~xxs
Standard Asme b16.9, jis, din, en, iso, etc
Usage Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc
Material carbon alloy stainless duplex stainless nickel monel inconel incoloy hastelloy nimonic steel astm a234 a860 a420 a403 a815 b366 pipe fittings elbow tee reducer cap bend cross weldolet
A234 pipe fittings, a860 pipe fittings, a403 pipe fittings, pipe fittings,
Carbon pipe fittings, stainless pipe fittings, duplex pipe fittings, alloy pipe fittings,
Elbow, tee, reducer, cap, cross, coupling, a234 elbow, a860 elbow, a403 elbow,
A860 wphy 56 elbow, a860 wphy60 elbow, a860 wphy65 elbow, ss304 elbow, ss304l

Elbow product 45deg 90ddeg 180deg elbow, equal tee, reducing tee, concentric eccentric reducer, cross, cap, stud end, cap, bend pipe
Size1/2''~ 24''(seamless), 4'' to 78'' (welded)
ThicknessSch 5s~xxs
StandardAsme b16.9, jis, din, en, iso, etc
UsagePetroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc
Material carbon alloy stainless duplex stainless nickel monel inconel incoloy hastelloy nimonic steel astm a234 a860 a420 a403 a815 b366 pipe fittings elbow tee reducer cap bend cross weldolet
A234 pipe fittings, a860 pipe fittings, a403 pipe fittings, pipe fittings,
Carbon pipe fittings, stainless pipe fittings, duplex pipe fittings, alloy pipe fittings,
Elbow, tee, reducer, cap, cross, coupling, a234 elbow, a860 elbow, a403 elbow,
A860 wphy 56 elbow, a860 wphy60 elbow, a860 wphy65 elbow, ss304 elbow, ss304l

Elbow product 45deg 90ddeg 180deg elbow, equal tee, reducing tee, concentric eccentric reducer, cross, cap, stud end, cap, bend pipe
Size,1/2''~ 24''(seamless), 4'' to 78'' (welded)
Thickness,Sch 5s~xxs
Standard,Asme b16.9, jis, din, en, iso, etc
Usage,Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc
Material carbon alloy stainless duplex stainless nickel monel inconel incoloy hastelloy nimonic steel astm a234 a860 a420 a403 a815 b366 pipe fittings elbow tee reducer cap bend cross weldolet
A234 pipe fittings, a860 pipe fittings, a403 pipe fittings, pipe fittings,
Carbon pipe fittings, stainless pipe fittings, duplex pipe fittings, alloy pipe fittings,
Elbow, tee, reducer, cap, cross, coupling, a234 elbow, a860 elbow, a403 elbow,
A860 wphy 56 elbow, a860 wphy60 elbow, a860 wphy65 elbow, ss304 elbow, ss304l

Elbow product 45deg 90ddeg 180deg elbow, equal tee, reducing tee, concentric eccentric reducer, cross, cap, stud end, cap, bend pipe
Size1/2''~ 24''(seamless), 4'' to 78'' (welded)
Thicknesssch 5s~xxs
Standardasme b16.9, jis, din, en, iso, etc
Usagepetroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc
Material carbon alloy stainless duplex stainless nickel monel inconel incoloy hastelloy nimonic steel astm a234 a860 a420 a403 a815 b366 pipe fittings elbow tee reducer cap bend cross weldolet
A234 pipe fittings, a860 pipe fittings, a403 pipe fittings, pipe fittings,
Carbon pipe fittings, stainless pipe fittings, duplex pipe fittings, alloy pipe fittings,
Elbow, tee, reducer, cap, cross, coupling, a234 elbow, a860 elbow, a403 elbow,
A860 wphy 56 elbow, a860 wphy60 elbow, a860 wphy65 elbow, ss304 elbow, ss304l

Mary


elbow Product 45Deg 90Ddeg 180deg elbow, Equal Tee, Reducing Tee, concentric eccentric reducer, cross, cap, stud end, cap, bend pipe
Size 1/2''~ 24''(seamless), 4'' TO 78'' (welded)
thickness SCH 5S~XXS
Standard ASME B16.9, JIS, DIN, EN, ISO,etc

Usage Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc
material carbon alloy stainless duplex stainless nickel monel inconel incoloy hastelloy nimonic steel Astm a234 a860 a420 a403 a815 b366 pipe fittings elbow tee reducer cap bend cross weldolet
a234 pipe fittings, a860 pipe fittings,a403 pipe fittings,pipe fittings,
carbon pipe fittings,stainless pipe fittings,duplex pipe fittings,alloy pipe fittings,
elbow,tee,reducer,cap,cross,coupling,a234 elbow,a860 elbow,a403 elbow,
a860 wphy 56 elbow, a860 wphy60 elbow,a860 wphy65 elbow,ss304 elbow,ss304l

Equal tee, reducing tee
Size : 1/2"nb to 48"nb in
Schedule : sch20, sch30, sch40, std, sch80, xs, sch60, sch80, sch120, sch140, sch160, xxs
Type : seamless / erw / welded / fabricated
Form : equal tee, reducing tee, barred tee , lateral tee
Materials
Stainless steel tee ¡¡ìc ss tee
Astm a403 wp gr. 304, 304h, 309, 310, 316, 316l, 317l, 321, 347, 904l
Carbon steel tee ¡¡ìc cs tee
Astm a 234 wpb , wpbw, wphy 42, wphy 46, wphy 52, wph 60, wphy 65 & wphy 70.
Low temperature carbon steel tee
Astm a420 wpl3 / a420wpl6
Alloy steel tee ¡¡ìc as tee
Astm / asme a/sa 234 gr. Wp 1, wp 5, wp 9, wp 11, wp 12, wp 22, wp 91
Duplex steel tee
Astm a 815 uns no s 31803 , s 32205.

Free fumigation plywood case or plywood pallet.

Tee
Size : 1/2"NB TO 48"NB IN
Schedule : SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Type : Seamless / ERW / Welded / Fabricated
Form : Equal Tee, Reducing Tee, Barred Tee , Lateral Tee
Materials
Stainless Steel Tee ¡§C SS Tee
ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
Carbon Steel Tee ¡§C CS Tee
ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
Low Temperature Carbon Steel Tee ¡§C LTCS Tee
ASTM A420 WPL3 / A420WPL6
Alloy Steel Tee ¡§C AS Tee
ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
Duplex Steel Tee
ASTM A 815 UNS NO S 31803 , S 32205.



Free fumigation plywood case or plywood pallet.

SIZE :

½" to 48" (As Per Customer Requirement)

DIMENSION STANDARD:
ANSI B 16.9 ,B 16.25 , B 16.28,MSS SP-43,SP-48,SP59
SCHEDULE:
SCH 10, SCH 40, STD, SCH30, SCH80, SCH XS, SCH 80, SCH 60, SCH120, SCH140, SCH160, XXS

TYPE :
Seamless / ERW / Welded

FORM :
Equal Tee, Reducing Tee, and Barred Tee, Lateral Tee

MATERIAL GRADE : Carbon Steel Buttweld Tee : ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70

Stainless Steel Buttweld Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L

Alloy Steel Buttweld Tee : ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91

Duplex Steel Buttweld Tee : ASTM A 815 UNS NO S 31803, S 32205

Low Temperature Carbon Steel Buttweld Tee : ASTM A420 WPL3 / A420WPL6

Nickel Alloys Buttweld Tee :
Standard ASTM / ASME SB 336
UNS 10276 (Hastelloy C 276)
UNS 2200 (NICKEL 200)
UNS 2201 (NICKEL 201
UNS 4400 (MONEL 400
UNS 8020 (ALLOY 20)
UNS 8825 Inconel (825)
UNS 6600 (Inconel 600)
UNS 6601 (Inconel 601)
UNS 6625 (Inconel 625)