Brand new 40a air plasma cutting torch (gun) pt-31 / lg40 can be used for machines such as cut30 , cut40, lgk40, ct312, ct416, mtc-120, mtc-120p, mtc-160, mtc-160p super-160, super-160p, etc. Also , they work for the following brand machines such as rilon , riland , jasic, mitech, chiry, unt, krypton, longetivity, and so on.
Rated welding current: 40 a
Max cutting thickness: 8 mm
The length: 4 meter (13 feet)
Kiln Dried Firewood oak birch/ Firewood beech dry wood Birch ash oak firewood For Sale
Firewood is made of locally supplied timber. The wood species we use to make firewood are beech, Ash, Oak, Birch, Alder, Pine, and Fir. Each log can be cut into pieces of 25, 30 or 45 cm, split 4-6 times for 8-15 cm diameter and stacked into 1m�³, 1,8m�³, 2m�³ or 2,2m�³ boxes or bags of 9.5 L, 21 L, 30 L, 40 L or 60 Liters. It is sold in 3 levels of moisture: fresh (35-55%), air-dried (25-35%) or kiln-dried (<25%).
Our logs are derived from hardwood (broadleaf) and softwood (conifers) species. The firewood is free from any chemicals or contaminations.
Confortotal 12,000 BTU Mini Split Air Conditioner and Heat Pump
Brand: Generic
Refund/Replacement: 30-day refund/replacement policy
Capacity: 1 Ton
Cooling Power: 12,000 BTU
Special Features: WiFi compatibility, compatible with Alexa
Product Dimensions: 13" D x 31" W x 23" H
Energy Star Rated: Yes
Color: White
Voltage: 110 Volts
Noise Level: 42 dB
Refrigerant: R-410A
!!!!!!!!!!!!!!!!PLEASE SEND US YOUR INQUIRY FOR OUR BEST PRICES!!!!!!!!!!!!
RPC-WELD PVC solvent cements have passed the following tests performed according to ASTM Standard D2564
Test Pressure
2 hour Hydrostatic Burst Test 400 psi
2 Hour Lap Shear Test 250 psi
16 Hour Lap Shear Test 500 psi
72 Hour Lap Shear Test 900 psi
DIRECTIONS:
Keep container close when not in use
Set time is the time required before joint can safely be handled.
Cure time is the time required before joint can be pressure tested
1. Cut pipe square with saw or hand cutter. Remove all burrs.
2. Check dry fit of pipe and fitting. Pipe should easily go to way into fitting. If pipe bottoms into fitting
it should be very snug.
3. Pipe and Fitting should be free of dirt, grease and other foreign materials. If necessary clean pipe and
fitting using RPC-WELD Pipe Cleaner. Primer is highly recommended for 3 and larger diameter installation.
Apply liberal coat. Primer will start softening surface of pipe and fitting thus ensuring superior joint.
4. Use applicator supplied with the can or suitable applicator at least the size of the pipe diameter
5. Apply liberal coat of cement to the pipe (equal to depth of fitting) and adequate coat inside of fitting.
Make sure there is no uncoated surface. Avoid puddling of cement, it may weaken the joint.
6. Immediately insert pipe into fitting with twisting motion. Cement should be wet. If it has dried recoat both parts.
Use sufficient force to ensure pipe bottoms into fitting.
7. Hold joint together for 30-40 seconds to make sure pipe is not pushed out longer time if temperature is low
and for larger pipes.
8. Allow 15 minutes set time before handling the assembly and 2 hours cure time if temperature is below 60 F.
Longer cure time may be required for larger pipe and /or if temperature is below 60 F.
Do not test with compressed air.
CURE TIME GUIDE: Consult ASTM schedule
Raw Materials from U.S.A
733 30 40A Air Plasma Cutting Torch Pt 31 Suppliers
Short on time? Let 30 40A Air Plasma Cutting Torch Pt 31 sellers contact you.
Introducing our high-performance Industrial Exhaust Fan, specifically designed to meet the demanding ventilation needs of industrial environments. With a diameter of 50 inches, this powerful fan is capable of delivering exceptional airflow of up to 2000 cubic feet per minute (CFM) while maintaining a steady air pressure of 30 pascals.
Built with durability and efficiency in mind, our Industrial Exhaust Fan is crafted using top-quality materials and cutting-edge engineering techniques. The robust construction ensures longevity and reliable performance, making it the perfect choice for industrial settings such as factories, warehouses, workshops, and more.
- Scientific name: Penaeus Vannamei.
- Origin: VietNam.
- Source: Sea Catch/Farm Raised.
- Peak season: April to October.
- Process Type: Raw & Cooked.
- Freezing Type: Block Frozen, Semi-IQF & IQF.
- Product line: Headless Shell on (HLSO).
- Head on shell on (HOSO).
- Easy Peel (Regular Cut).
- Peeled & Deveined (Tail On / Tail Off).
- Cooked PDTO / P&D.
- PDTO Skewer.
- P&D Skewer.
- PUD (Peeled and Un-deveined).
- Available Size: 16/20, 21/25, 26/30, 21/30, 31/40, 41/50, 51/60, 61/70, 71/90, 91/120, 100/200, 200/300.
- Packing Style: Bulk 10kg/ctn or 1x10boxs/ctn.
- Requirement: All products are produced by followed HACCP based GMP, SOP, and SSOP. All production related workers always maintain personal hygiene and sanitation.
- Uniformity: 1.25 is the standard uniformity for all sizes. It means 10% largest vs. 10% smallest shrimps per unit.
- Appearance: All shrimp have uniformity of natural color, size and good condition within a unit. No black or pin spot and flavors are allowed.
- Note: We may produce and supply any specified Size/ Variant/ Packet Variety/Value addition for either Buyers Brands and/or Packer's as per Buyers Requirements
Black tiger Shrimp is commonly known as the Giant Tiger Prawn Jumbo tiger prawn or Asian Tiger shrimp Striped like its jungle namesake is meaty, juicy, firm textured and mild in flavor, the Black Tiger shrimp is available year-round and is one of Asia's major aquaculture products, in general, this is the most prominent farmed crustacean products in international market.
- Scientific name: Penaeus monodon
- Origin: VietNam
- Source: Sea Catch/Farm Raised
- Peak season: April to October
- Process Type: Raw & Cooked
- Freezing Type: Block Frozen, Semi-IQF & IQF
- Product line: Headless Shell on (HLSO)
- Head on shell on (HOSO)
- Easy Peel (Regular Cut)
- Peeled & Deveined (Tail On / Tail Off)
- PDTO (Butterfly Cut)
- Cooked PDTO / P&D
- PDTO Skewer
- P&D Skewer
- PUD (Peeled and Un-deveined)
- Available Size: 6/8, 8/10, 10/12, 13/15, 16/20, 21/25, 26/30, 21/30, 31/40, 41/50, 51/60,
- Packing Style: 6 X 4 Lbs., 6x2Kg, 6 X 1.8Kg, 6 X 1.5kgs, 6 X 1.2kgs, 10x1Kg, 5x2Lbs, 10x2Lbs
- Requirement: All products are produced by followed HACCP based GMP, SOP, and SSOP. All production related workers always maintain personal hygiene and sanitation.
- Uniformity: 1.25 is the standard uniformity for all sizes. It means 10% largest vs. 10% smallest shrimps per unit.
- Appearance: All shrimp have uniformity of natural color, size and good condition within a unit. No bad color or flavors are allowed.
Note: We may produce and supply any specified Size/ Variant/ Packet Variety/Value addition for either Buyers Brands and/or Packer's as per Buyers Requirements
Best Quality Kiln Dried Beech Firewood,Oak Firewood,Pine Firewood at Affordable Prices
SPECIFICATION BELOW
Product name
Best Quality Kiln Dried Beech Firewood,Oak Firewood,Pine Firewood at Affordable Prices
Supply Capacity
10 container 40'HC/ week
Exporting Standard And Quality Length:
10 to 30cm
Length:
20cm to 50mm
Burn Value:
90-95%
Diameter
3-5-10cm
Supplying Period
All the whole year
Package
PP bags/ Net Bags
BRAND
Organic Oak Firewood
100% oak, birch, beech, dry Birch ash oak firewood FOR WHOLESALE
Firewood is made of locally supplied timber. The wood species we use to make firewood are beech, Ash, Oak, Birch, Alder, Pine, and Fir. Each log can be cut into pieces of 25, 30 or 45 cm, split 4-6 times for 8-15 cm diameter and stacked into 1m�³, 1,8m�³, 2m�³ or 2,2m�³ boxes or bags of 9.5 L, 21 L, 30 L, 40 L or 60 Liters. It is sold in 3 levels of moisture: fresh (35-55%), air-dried (25-35%) or kiln-dried (<25%).
Our logs are derived from hardwood (broadleaf) and softwood (conifers)
species. The firewood is free from any chemicals or contaminations.
Sizes are customized buyers' demand.
Standard: up to 25% humidity.
Diameter: 8-15 inches.
Packaging: packed in wooden boxes (containers).
Packing: Bundled/In Bulk, Plastic Caps Plugged, Waterproof Paper Wrapped
Production Process for ERW steel pipe:
1.Uncoiling
2. Leveling --- 3. End cutting --- 4. End shearing welding --- 5. Supercoil accumulator --- 6. Edge cutting --- 7. Ultrasonic detection --- 8. Forming --- 9. Electric induction welding --- 10. Ultrasonic detection for weld seam --- 11. Medium frequency heat treatment --- 12. Air cooling --- 13. Water cooling --- 14. Sizing --- 15. Flying cutting --- 16. Flush-out --- 17. Cropping --- 18. Flattening testing --- 19. Straightening --- 20. End facing and bevelling --- 21. Hydrodynamic testing --- 22. Ultrasonic detection for weld seam --- 23. Ultrasonic detection for pipe end --- 24. Visual and dimensions inspection --- 25.Weighting and measuring --- 26. Marking --- 27. Coating --- 28. Pipe-end protection --- 29. Bending --- 30. Shipping
Specification of ERW steel pipe:
API 5L/ASTM A53 GR.B (Small Diameter ERW Steel Pipe)
Outside Diameter
Wall Thickness
Outside Diameter
Wall Thickness
(mm)
(mm)
(mm)
(mm)
33.4
(1")
2.1-2.4
133
3.0-5.75
2.5-3.25
6.0-7.75
3.5-4.0
8.0-10
42.3
(1.2")
2.1-2.4
139.7
(5)
3.0-4.5
2.5-3.5
4.75-5.75
3.75
6.0-7.75
4.0-5.0
8.0-10
48.3
(1.5")
2.1-2.4
152
3.0-4.5
2.5-3.25
4.75-5.75
3.5-3.75
6.0-7.75
4.0-4.25
8.0-10.0
4.5-6.0
159
3.25-6.75
60.3
(2)
3.0-4.0
6.8-7.75
4.25-4.75
8.0-10.0
5.0-5.75
10.0-11.75
73
3.0-4.75
165
3.0-6.0
4.8-5.25
6.25-7.0
5.5-7.0
76.1
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Ferrocene is an organic transition metal compound with aromatic properties. Its chemical formula is Fe(C5H5)2. It is an orange powder with camphor odor at room temperature. Melting point 172�ºC-174�ºC, boiling point 249�ºC, above 100�ºC can sublimate; Insoluble in water, organic solvents.
It is chemically steady and poisonousless, not reacting with acid, alkail and ultraviolet. It doesn't decompose until 400�°C. Mixed with Ferrocene, the diesel oil can be preserved for a long use
Application of ferrocene
Fuel catalyst for rocket
1. Used as fuel catalyst for rocket propellant, it can improve combustion speed by 1-4 times, lower the temperature of exhaust pipes, and avoid infrared chase.
Diesel oil
2.Used in fuel oils such as diesel oil, heavy oil, light oil ect, It can eliminate smoke, save energy and reduce air pollution. Adding 0.1% Ferrocene to diesel oil can cut down the consumption of oil by 10--14%, eliminate smoke by 30--70%, and improve power by more than 10%.
Scale integrated circuit board
3.It can be used for making large scale integrated circuit board, enhancing light sensitivity by four times, improving accuracy, simplifying technical process, and eliminating pollution.
Current 140A
Duty Cycle 60%
Gas AIR
Gas Pressure 4.5-5.0Bar
Gas Flow 220LPM
Ignition HF
Post Flow 140 sec.recommended
Standard Length 6M
2. Our service:
• Your inquiry will be replied within 24 hours.
• Well-trained & experienced sales can reply your inquiries in English.
• OEM & ODM projects are highly welcomed.
• Your business relationship with us will be confidential to any third party.
• Good after-sale service.
3. Our Advantage :
1. We have our own factory, so our price is competitive.
2. We have special research and development team; we can supply the newest goods to customers
3. We have strict test and quality control system, we can guarantee good quality.
4. We have eight production lines; we can guarantee in-time delivery.
4. MAIN PRODUCTS:
MIG/CO2/TIG/Plasma/Argon Welding Torches and Accessories:
1. Binzel 15AK,24KD,25AK,36KD,40KD Air Cooling Torch ,501D Water Cooling Welding Torch
2. Panasonic 180A,200A,350A,500A Welding Torch
3. OTC 180A,200A,350A,500A Welding Torch
4. PSF / ESAB 205A,305A,405A,505A Welding Torch
5. Trafimet 15AK,24KD,25AK,36KD Welding Torch
6. TBI 15AK,24KD,25AK,36KD Welding Torch
7. KR 180A,200A,350A,500A Welding Torch
8. P80,AG60,PT31,SG51,SG53,JG60,JG100,SG55,AG100,TZ100,A141,A101 Plasma Cutting Welding Torch
9. TIG welding Torches: WP9/WP12/WP17/WP18/WP26/WP20/WP27 Air/Water Cooling Torch
10. MIG/CO2 Welding Parts : contact tip , tip holder, swan neck, welding nozzle, gas diffuser, welding liner, Teflon liner, cable plug , euro connector, Panasonic connector, OTC connector, insulator, feed roller, protective paste, wire feeder, wire feeder motor,
11. TIG /Argon Welding & Cutting Parts: electrode tip & nozzle, welding collect, collect body, gas lens, ceramic nozzle, long cap, short cap
12. Electrode Holder, Earth Clamp, Welding Wires, Cable Connectors
5. Special Requests:
1. We can print your LOGO on products or packages.
2. High quality and competitive price and new fashioned design.
3. We can manufacture the products according to your requirements.
4. We can supply various of torches and we are professional.
5. Above is only for reference, we can make customized products.
Plasma cutting torches
The S series, made up of torches without high frequency from 20 to 110 amperes, satisfies the market demand, offering various advantages, such as: less electromagnetic disturbance, less electrical stress on the torch and connection cables, greater construction simplicity in comparison to competitors. The a series, with high frequency cut in, from 50 to 200 amperes, offers an optimal response to every request for plasma cutting with traditional generators. The model ergocut a51 is the latest creation in this field to complete the range in the low power segment, while the model ergocut aw201, an evolution of the torch pw180, with the new water cooling system, permits excellent performance in cutting thick pieces. The model ergocut cb completes the trafimet plasma range in cutting with high frequency cut in.
All the torches and consumables are packed in standard boxes and plastic bags.
Optional configuration
1- HCQZ100 type Handgrip gasoline cutting torch 1pcs with 3 cutting nozzles (cut range 30~100mm)
2- HCQZ300 type Handgrip gasoline cutting torch 1pcs with 4 cutting nozzles (cut range 100~300mm)
3- HC-50 type semi-automatic cutting torch 1pcs without nozzle
(Which can be refitted to the acetylene semi-automatic cutting machine of Chinese standard instead the acetylene cutting torch.)
4- HC-80 type profile cutting torch 1pcs without nozzle
(Which can be refitted to the acetylene CNC cutting machine of Chinese standard instead the acetylene cutting torch.)
5- HC-60 type Handgrip gasoline heating torch 1pcs with 2 cutting nozzles (hard flame and soft flame)
6- Nozzle
Product descriptions from the supplier
Product Description
Premium Frozen Chicken Wings, perfect for all your culinary needs. Our chicken wings are sourced from high-quality, hormone-free chickens, ensuring that you get the best flavor and nutrition in every bite. Each wing is expertly cut, trimmed, and flash-frozen to lock in freshness and natural juices, making them a versatile addition to your kitchen.
Whether you're planning a family dinner, hosting a game night, or just craving a quick snack, our frozen chicken wings are the perfect choice. They're easy to prepare, making them ideal for frying, grilling, baking, or air frying. Simply season them with your favorite spices, toss them in your preferred sauce, and enjoy a delicious meal in minutes.
Key Features:
Premium Quality: Sourced from hormone-free, high-quality chickens.
Flash-Frozen: Locked-in freshness and natural juices ensure great taste every time.
Versatile: Perfect for frying, grilling, baking, or air frying.
Convenient: Easy to prepare for any occasion, from family dinners to game nights.
Nutritious: A great source of protein, perfect for a balanced diet.
No Added Preservatives: Our chicken wings are free from artificial preservatives and additives.
Product Specifications:
Weight: Available in various sizes, including 1kg, 2kg, and bulk packs.
Packaging: Vacuum-sealed for freshness.
Storage: Keep frozen at -18C or below.
Origin: Sourced from trusted suppliers, ensuring the highest standards of quality and safety.
Cooking Instructions:
1. Frying: Preheat oil to 180C. Fry frozen chicken wings for 10-12 minutes or until golden brown and crispy.
2. Grilling: Preheat grill to medium heat. Grill frozen wings for 20-25 minutes, turning occasionally.
3. Baking: Preheat oven to 200C. Bake frozen wings on a lined baking sheet for 25-30 minutes or until fully cooked.
4. Air Frying: Preheat air fryer to 180C. Cook frozen wings for 18-20 minutes, shaking halfway through.
Serving Suggestions:
Toss in your favorite buffalo, BBQ, or honey-garlic sauce.
Serve with a side of celery sticks and blue cheese dressing.
Pair with a cold beverage for the ultimate snack experience.
Our Frozen Chicken Wings offer the perfect blend of convenience, quality, and flavor, making them an essential staple in every household. Whether you're a busy professional, a parent, or just someone who loves good food, these wings are guaranteed to satisfy. Stock up today and enjoy restaurant-quality chicken wings from the comfort of your home!
Main Description of CNC Plasma Cutting Machine with Flame Torch
There are two cutting methods for this metal cutting machine: one is plasma cutting and the other is gas (flame) cutting. Generally, plasma cutting machines are used for metal cutting with a thickness of less than 30mm. The gas (flame) cutting machine is used for iron/steel cutting with a thickness of 30-200mm. The CNC flame cutting machine with a plasma torch is a plasma cutting machine with a CNC controller, which can cut metal up to 200mm. It is also called CNC oxygen and plasma cutting machine, CNC plasma and flame cutting machine, CNC oxygen cutting machine, CNC plasma and oxygen cutting machine.
CNC plasma cutting machine adopts rigid welding frame to avoid vibration and high cutting precision. The metal cutting machine is equipped with an automatic arc voltage adjustable device. The plasma flame cutting machine has fast cutting speed, high precision, low cost, thin and neat cutting incision, which can avoid secondary processing.
THC height controller: high configuration numerical control system, automatic arc ignition, stable performance.
Stepping motor and driver: YAKO motor and driver, with excellent performance, stable and reliable quality. Adopting Japanese new design, new technology, high-quality materials, large torque, low heat generation, low vibration, stable operation, and strong anti-interference ability.
Research and control stepping motor: with precision mechanical transmission system, faster and more stable, higher cutting efficiency.
Suitable Material of CNC Plasma Cutting Machine
FORSUN plasma cutting machine is suitable for cutting kinds of metal materials such as steel, copper, aluminum and stainless steel can be processed. It is applied to iron plates, aluminum plates, galvanized sheets, white steel plates, titanium plates, and other sheet metals. The flame cutting torch can cut 30-200mm metal plates with oxygen + propane or acetylene.
About FORSUN CNC
Jinan FORSUN CNC Machinery Co., Ltd.,(forsuncnc.com) one of the professional Wood CNC Router manufacturers and suppliers in China, has been focusing on providing high-quality CNC Router Machines and solutions for worldwide customers for 20 years. Main computerized CNC machine types: Wood CNC Router, 3d CNC carving machine, Wood CNC machine, ATC CNC router, Basic beginner CNC router, Mini CNC router, diy CNC router, hobby cnc router, CNC nesting machine, Multi-Tool CNC machine, Rotary axis CNC carving machine, 4/5 Axis CNC router, CNC marble stone engraving machine, CNC plasma cutter, CNC foam cutting machine, CO2 laser cutting machine, fiber laser cutter, etc.
Forsun CNC Router helps you stay productive. We have the right CNC Router Machine tools for your application and we are supporting you every step of the way.
