Blue face masks flat Non Woven Thick 3-Layers disposable Breathable Facial Masks with EarloopÂ
3-i: 3 layer pleated mask has folds that expand to offer full coverage over nose and mouth. The Length is 6.8 inch and the width is 3.8 inch.
Less Bulk = Better Breathability --- A Nanofiber inner layer allows face masks to be thinner than most other disposable masks because Nanofibers are 1000 times thinner than a human hair. This means less bulk but a better breathing experience while blocking out fine particles in the air such as saliva, dust and, pollen.
Comfortable - Extra-soft elastic ear loops eliminate pressure to the ears for maximum comfort. Can be used with earloop holders/ mask strap extenders for additional comfort and well-being.
Upgraded Nose Clip & Ear Loop-- The Extra-soft elastic ear loops could eliminate pressure to the ears for maximum comfort. It can be used with earloop holders for additional comfort
� Widely Applicapable Indoor&Outdoor Facial Masks for Daily Uses-- Our personal protective masks are worn all over the world in most common workplace environments. They are suitable for public transportation, shopping, school, and other public settings.
3-Layered Protection-- The disposable face mask is made of Premium Melt-Blown Cloth; the outer layers is a high-quality non-woven fabric and the center layer is a filtration non-woven fabric.
Maks Antibacterial flat 3-Layers disposable nowoven protective face masks with Earloop
3-LAYER STRUCTURE PROTECTIVE MASK: 3 layer pleated mask has folds that expand to offer full coverage over nose and mouth. The Length is 6.8 inch and the width is 3.8 inch.
Less Bulk = Better Breathability --- A Nanofiber inner layer allows face masks to be thinner than most other disposable masks because Nanofibers are 1000 times thinner than a human hair. This means less bulk but a better breathing experience while blocking out fine particles in the air such as saliva, dust and, pollen.
Comfortable - Extra-soft elastic ear loops eliminate pressure to the ears for maximum comfort. Can be used with earloop holders/ mask strap extenders for additional comfort and well-being.
3-LAYER STRUCTURE PROTECTIVE MASK: 3 layer pleated mask has folds that expand to offer full coverage over nose and mouth. The Length is 6.8 inch and the width is 3.8 inch.
Less Bulk = Better Breathability --- A Nanofiber inner layer allows face masks to be thinner than most other disposable masks because Nanofibers are 1000 times thinner than a human hair. This means less bulk but a better breathing experience while blocking out fine particles in the air such as saliva, dust and, pollen.
Comfortable - Extra-soft elastic ear loops eliminate pressure to the ears for maximum comfort. Can be used with earloop holders/ mask strap extenders for additional comfort and well-being.
Free from big stalks and branches, the stevia leaves are used for producing the stevioside and liquid extracts of stevia.
Specification:
Moisture under 10 Ñ - 7, 01%
Stevioside - 10, 78%
Rebaudioside À - 3, 66%
Purity:
- dried green leaves - 90-95%;
- seeds, flowers and yellow leaves – 5-10%;
Harvest period: september - april
Packing:
Polypropylene bags per 25 or 50 kg
20"st contains 7500 – 8000 kg
40"st contains 15000 – 16000 kg
40"hq contains 18000 kg
Ground leaves
Dried ground stevia leaves are used in teas as natural sweeteners.
Specifications:
Purity:
- dried green leaves – 90-95%;
- seeds, flowers and yellow leaves - 5%-10%;
Size: 5 – 10 mm;
Color: green, light green.
Packing type: double polypropylene and polyethylene bags, per 7 kg.
Fine ground leaves
Fine ground leaves are used in tea bags, as well as in tea mixtures as natural sweetener and dietary supplement.
Specifications:
Purity:
- dried green leaves - 90%-95%;
- seeds, flowers and yellow leaves - 5%-10%;
Size: 1 – 2 mm;
Color: green, light green.
Packing type: double polypropylene and polyethylene bags, per 7 kg.
Anti-allergic
Ultrasonic seam
Soft nose Barrett
Latex and fiberglass free
Single use only
Packing: 50 pcs/box, 2.000 pcs/carton
3-PLY DISPOSABLE FACE MASK STRUCTURE
1st Layer: Water-repelling, non-woven fabric. Prevents droplet and spray penetration.
2nd Layer: Electrostatic-induced melt-blown polypropylene, blocks dust and microbes (>99%).
3rd Layer: Fine bicomponent (PP/PE) fabric, absorbs moisture and provides soft and non-sticky feel.
Focus-6200 products are kind of non-hardening and self-adhesive waterproof sealing butyl tapes. The materials are weathering resistance and fully accommodate to the surface that it attached to, with effective life up to 20 years.
Main Specification
(Customized size is acceptable.)
2mm thickness * 20mm width * 20mm roll
length 2mm thickness * 30mm width *20mm roll length
Main Color - black, grey, white
Technical Data
Product Series FOCUS-6200 Series
Application Construction Industry
Elongation - 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 25N/cm
Tensile Strength 250KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet
Advantages
* Never hardening, maintain good waterproofing property with weathering resistance performance.
* Excellent performance in waterproofing and sealing.
* Good anti-aging performance effective life up to 20years.
* Easy to apply.
Applications
* Provide waterproof and sealing protection forsteel
structure construction.
* Provide waterproof and sealing protection for door joints, window joints,roofs
and air-ducts. Provide waterproof and sealing protection for sunshine rooms, light plate rooms and thermostatic chamber.
* Provide repair function for leaks on surfaces of metal/plastic/glass/concrete.
Product Feature
Odor: Slight irritative.
Specific Gravity: Unavailable
Solubility: Soluble in water.
Density: 2.19
pH: 6-7
pH Test-Method: PH test paper.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not applicable.
Melting Point: >300 C Decomposes.
Vapor Pressure (mm Hg): No information found.
Bulk Density: ~0.9
Evaporation Rate (BuAc=1): No information found.
Application
1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching .
2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps.
3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products,
4. in mineral, the compound of thiourea and other sulphides.
5. as reducing agent in chemical industry.
6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms.
Packaging 50kg/100kg net in iron drums with double PVC bags
Product Specification/Models
NDEX 90%, 88%, 85%. FOOD ADDITIVE
Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal
calculated as Pb, 1ppm
Water Insolubles05%
Shelf Life(month)12
EN590 ULSD available in Major Ports for FOB shipping terms, Kazakhstan Origin,
EN590 FOB price is $470/mt including $10 commission to buyer's side.
FREE ON BOARD (FOB) PROCEDURE
1. Buyer Issues ICPO:
The buyer submits an Irrevocable Corporate Purchase Order (ICPO) with banking details and passport information.
2. Seller Issues Commercial Invoice (CI):
The seller sends a Commercial Invoice (CI) for the available product, which the buyer countersigns.
3. Seller Provides POP Documents:
The seller provides Proof of Product (POP) documents, including:
SGS Report
Tank Storage Receipt (TSR)
Product Analysis
Injection Report
Authority to Verify (ATV)
Refinery Commitment Letter
Authorization to Sell and Collect (ATSC)
4. Buyer Verifies POP:
The buyer contacts the tank farm to confirm product availability.
5. Payment & Dip Test:
The buyer pays for a 5-day tank lease, and the seller issues an Unconditional Dip Test Authorization (UDTA). The tank farm provides a Clearance Access Entrance Permit (CAEP) for the dip test and SGS report.
6. NCNDA/IMFPA Signed:
All intermediaries sign the NCNDA/IMFPA and send it to the seller for endorsement.
7. Sealing & Final Payment:
After a successful dip test, the buyer requests tank sealing. The buyer pays for the full product via MT103/T/T and extends the tank lease for 48 hours.
8. Payment to Intermediaries:
The seller pays the intermediaries within 48 hours of receiving payment
1. Buyer issues an official ICPO with the seller's procedure, passport copy, banking details along
with their Tank Storage Agreement "TSA".
2. Seller issues their Commercial Invoice "CI" to the buyer, Buyer signs and returns the commercial
invoice to the seller along with an Acceptance Letter of the sales and purchase procedure.
3. Seller verifies the buyer's storage facility and their Tank Storage Agreement (TSA) with the port
authority. (NB: Seller will issue a Tank-to-Tank Injection Agreement (TTIA) to be signed by all
parties only if buyer's TSA is engaged, not active or cannot be verified with the local port
authority).
4. Seller issues all POP documents below to the buyer upon a successful verification and approval
of the buyer TSA or after receiving the TTIA fully signed by all parties:
a. Injection Report.
b. Product Passport.
c. 24 Hours SGS Report.
d. Product Certificate of Origin.
e. Tank Storage Receipt (TSR).
f. Authorization to sell and collect.
g. Unconditional Dip-Test Authorization.
h. Product Title Holder Transfer Agreement.
i. NCNDA/IMFPA.
5. If required buyer may inspect by SGS (Dip Test In Tanks) at buyer's expense.
6. Upon successful verification of POP or Dip Test in the seller's tank, buyer provides Tank Storage
Receipt (TSR) to seller in order to issue the scheduled Injection Programming (IP) to be signed by
buyer storage facility and then injects the product into buyer's tanks.
7. Buyer makes the payment for the product via MT103, seller transfers the Title Holder &
Ownership of the product to the Buyer.
8. After successful Trial Lift (First Lift), Seller issues SPA/Contract for 12 months with R&E to
Buyer for processing.
9. Seller pays commissions to all intermediaries involved, for the initial lift and all subsequent lifts
according to the signed NCNDA/IMFPA.
Vessels for TTO/STS EN590 available on regular basis
TERMS OF NEGOTIATION
INCOTERMS: TTO/STS
ORIGIN: EUROPEAN
INSPECTION: SGS, IQS,CIQ OR SIMILAR
INSURANCE: PAID BY SELLER, COVERING 110% OF SHIPMENT VALUE
ACCEPTABLE PAYMENT TERM: MT103/TT WIRE/USDT
COMMODITIES:
DIESEL FUEL EN590 USLD-10PPM/50PPM/500PPM GASOLINE
MINIMUM QUANTITY: 50,000 MT per Month
MAXIMUM QUANTITY: 400,000 MT Per Month
TTO/STS PRICE: USD $470 PER MT GROSS / USD 460 PER MT Net
NON-NEGOTIABLE TITLE/TANKER TAKE OVER PROCEDURE (TTO)/ SHIP
TO SHIP (STS)
1.The Buyer shall issue an Irrevocable Corporate Purchase Order (ICPO),
accompanied by the company's registration certificate and a Guarantee Letter confirming its intention to assume legal title of the product.
2.The Seller shall prepare and submit a draft Memorandum of Understanding
(MOU) to the Buyer. The Buyer shall review, countersign, and return the
executed MOU to the Seller.
3. Upon receipt of the countersigned MOU, the Seller shall provide the Buyer
with the following documentation for verification and confirmation:
A. Vessel Declaration
B. Bill of Lading
C. Loadline Report (Ullage Report)
D. Q&Q Analysis Report at Loading Port
E. Payment Invoice for Title Transfer Approval
F. Cargo Manifest
4. Upon verifying that the submitted documents, Buyer shall proceed to remit
the statutory governmental fee for Ttitle Transfer Approval in the amount of 95,000 via T/T wire transfer within two (2) international banking days. This
amount shall be deducted from the final purchase price.
5. If vessel rerouting is required, Buyer shall authorize the shipping company to
redirect the vessel to the Buyer's preferred port of discharge. The Seller shall
complete the transfer of product title to the Buyer through the relevant
governmental authority and shall issue the following documents to the Buyer:
Freshly dated Dip-Test Authorization (DTA)
Authority to Board (ATB)
Authority to Verify (ATV)
The Buyer shall then appoint SGS or an equivalent inspection agency to carry out the Q&Q analysis.
6. Upon successful completion of the dip test and once the vessel/tanker is
securely moored at the designated dock, the Buyer shall remit the remaining
balance of the purchase price via MT103 wire transfer. Following confirmation
of payment, the Seller shall issue the official Certificate of Ownership to the
Buyer, thereby finalizing the legal transfer of title. Trans-loading shall begin
immediately thereafter.
7. Trans-loading operations shall commence without delay upon confirmation of payment and title transfer.
8. The Seller shall release commissions and any agreed payments to intermediaries involved in the transaction within forty-eight (48) hours of receipt of full payment from the Buyer's bank.
7. Trans-loading commence immediately.
8. Seller will release payments to the intermediaries involved within 48 hours of receiving the Payment for the product from the Buyer's bank.
DESCRIPTION :
3 Ply MEDICAL disposable mask For Kids
EN:14683:2019+AC:2019
Material: Outside layer 25g blue non-woven
Middle layer-25g melt blow filter 99% Inside
25g white non-woven
Size: 14.5*9.5cm
Color:Blue and white,
Certification:CE and FDA
Model No :
3Ply MEDICAL
For Kids
. Quantity Pcs ;
10
Packing details :
10pcs per box,
100boxes/ctn,1,000pcs/ctn,
G.W.:4.8kgs,carton size:54.5*42*26cm
Good Feeling 2D KF94 Quarantine Mask is a quality product approved by the Korean Ministry of Food and Drug Safety.
 Respiratory protection from harmful particulate matter such as yellow dust, fine dust, and infectious sources
 1. V-Fit thin face design
With thin face visual effect. The inside does not touch the lips for a comfortable fit.
2. High-specification MB filter
The Korean-made high-standard MB filter can block more than 94% of particulate harmful substances
such as sandstorms, fine dust (PM2.5), and infection sources.
3. High elastic ear straps
Use high elastic ear straps for comfortable wearing
So Tango, 7 extra layers with 4 layers of extra crisp wafers combined with the delicacy of 3 layers soft cream that delights on every bite. Available in 2 flavors namely Belgian Chocolate and French Vanilla Milk. Packaging = English, Bahasa Indonesia. Port of Loading: Semarang, Indonesia. Note: We could paste sticker on each pack should there is any additional information needed (importer name, information in other language, etc)
Lotus root is very nutritious and contains many properties that make it an especially healthy ingredient to consume. The large amount of vitamins and minerals it contains include Vitamin B, Vitamin C, iron, potassium, copper, thiamin, and zinc, among others. It is also a good source of protein and dietary fiber.
China Clay is a clay mineral with the chemical composition AlSiO3O5(OH)3. It is layered silicate mineral. It is soft earthy, usually white in color, produced by the chemical weathering of Aluminium Silicate mineral like Feldspar. Commercial grades of China Clay are supplied and transported as dry powder form, semi dry noodle form or as slurry.
Applications:
- It is used in Cer/bamics for body & glazing of Tiles and Sanitary Wares.
- In paper it is used as filler. It is also used for paper coating purpose.
- It is used in paint also to extend Titanium Dioxide (TiO2) and modify gloss level.
- It is used in rubber to enhance reinforcement properties.
Palm kernel shell (PKS) is actually the by-product from palm oil industry, before the era for palm kernel shell being used as biomass, the oil palm owner will bury the palm kernel shell underneath the land and let it becomes black color palm kernel compost. This is sort of organic fertilizer but because of the hard shell, it takes much longer time for converting totally to organic fertilizer. It is well known biomass product because of it small in size and high in heat energy or calorific value. Palm kernel is kernel from oil palm fruit. After the oil palm fruit gone through the palm oil process, the kernel will be separated and kernel oil will further be distilled and it also gained it status as a bio fuel resource for biomass product. It also classified as a renewable energy that complies with country energy regulation, such as Japan, Korea and Europe. Palm kernel shell also consider as the replacement for wood chip.
Gross Calorie Value : 3.600 Kcal , Moisture : 14-20% ( Maximum 20% due to rain ) , Impurities : < 3% ( Maximum 3%) , Ash Content : < 3% ( Maximum 5%) , Size : 4-20mm. , Sulfur : < 0.1% ( Maximum 1%) .
Product Description :
Our IRRI-9 Parboiled Rice is a non-basmati long grain rice variety, widely preferred in Asia, Africa, and the Middle East for its firm texture, non-sticky grains, and cost-efficiency. Parboiled using advanced steaming techniques, it retains more nutrients and offers improved shelf life and cooking quality.
Key Features:
Double/Silky Polished for Enhanced Appearance
Long Shelf Life & High Yield When Cooked
Ideal for Retail, Foodservice, and Government Supply Contracts
Export-Grade Quality with Strict Quality Controls
Private Label & Custom Bag Printing Available
SGS/Third-Party Inspection on Demand
Packaging & Delivery:
Price: FOB Pakistan $601 per MT
Minimum Order: 25 MT (1 x 20FT Container)
Packaging Options: 5kg, 10kg, 25kg, 50kg PP Bags or Customized Packaging Available
Certification & Compliance:
ISO - Certified Quality Management System
HACCP - Hazard Analysis & Food Safety Control
HALAL - Halal-Certified Rice Processing
Contact US
Ensure premium quality for your business. Inquire now to get a detailed quotation and start your long-term partnership with KHUMSUB a trusted Pakistan IRRI-9 Parboiled Rice supplier.
