Find Verified Wires Cables Suppliers, Manufacturers and Wholesalers

We supply a variety range of steel products for construction sites, engineered plants, and interior appliances, such as:
1. Welded steel wire mesh
2. Welded steel wire fence :chainlink fence,wire partition inside the factories
3. Steel Works : the popular fences : wrought iron fences, ornamental fences, temporary fences, steel barriers, steel gate, and doors, and automatic gate system packages, included swing gates, sliding gate, and barriers, balcony
4. Wire products : wire partition, and security cages, display grill, wire shelves, wire lockers, wire cages & barns, ect.


Container.

1.Solid or stranded copper/aluminum conductor
2.Insulation with XLPE, PE, or PVC
3.For cables of two-phase or three-phase conductors, round or flat shape available
4.PVC inner COVERING
5.Concentric layer of helically layed copper/aluminum wires
6.Wrapping tape
7.Black XLPE, PE, or PVC jacket
The concentric cable is used in electric service entrance from the power distribution network to the meter pannel(especially where it is required to prevent electricity theft), and as feeder cable from the meter pannel to the distribution pannel.
This cable an be used in dry and wet places, outdoors or directly buried. It has a maximum operating temperature of 90�ºC and rated voltage of 600V&below.

Aerial Bundle Cable (ABC) low voltage cable for overhead power distribution offering higher level of safety and reliability and lower power losses than bare conductors.
Phase Conductor: Concentric strand or compressed 1350-H19 conductor Neutral
Conductors: aluminum alloy 1350-H19,6201-T81, or ACSR conductors
Insulation: high density polyethylene (HDPE) or cross-linked polyethylene (XLPE).

Power cable
Spaced Aerial Cable, SAC
15kV, 25kV, 35kV

Power cables
Aerial Bundle Cables, LV - ABC
AX

POWER CABLE,
Medium voltage cables armoured

POWER CABLES
Fire Resistant & Flame Retardant Cables

Please contact us for for details catalogue

POWER CABLE
Medium voltage cables

Please contact us for for details catalogue

POWER CABLE
Low voltage cables

Please contact us for for details catalogue

JPC is a cable assembly manufacturer serving the electronics assembly sector.
- NEV (New Energy and Vehicles).
- CCDC (Cloud Computing and Data Communications).
- IoT (Internet of Things).
- CE (Consumer Electronics).
- SCI (Smart Connection Industrial).

We maintain manufacturing facilities in Saigon Hightech Park, Thu Duc, Ho Chi Minh City, Vietnam.
Our products are currently exported directly from Vietnam to the United States and Europe for clients in the Energy solutions, Databases, EMS, and Automotive industries.

Cable Grout
Industry standard high performance grout for the grouting of cables in post-tensioned concrete, void and fissure grouting, etc.
Description
A specially formulated Portland Cement shrinkage-compensated powder mix designed for the grouting of cables in post-tensioned concrete. The material readily mixes with water to produce a particularly fluid flowing grout which will penetrate and fill fine voids within and around the cables then harden without shrinking to give a high strength product.
Uses include grouting of cable ducts, voids and fine fissures, support of cable anchor plates and ground anchors. Also to provide bearing or contact between structural elements, for grouting behind shafts and tunnel linings, and for underpinning, loose floor and road slabs.
Once hardened and cured, high compressive strengths are achieved giving resistance to static and dynamic stresses. Cable Grout has a total chloride, sulphate and sulphide-ion content below that specified
Advantages
Does not contain aluminum powder nor any components which generate hydrogen gas, cardon dioxide or oxygen.
Silica fume enhanced for low permeability.
Non-metallic; will not stain or rust. Non-corrosive; does not contain chlorides.
Zero bleed, even at high flow
Excellent for pumping: Does not segregate, even at high flow. No build-up on equipment hopper.
Superior freeze/thaw resistance.
Even with his great fluidity, it can disperse water (thixotropic)
Preparation
- Genetic tubes must be cleaned with a high-pressure air compressor
- Check the vents and pressure test for gen tubes
- Repair leaks before grouting pumb
Mixing
- Water : mortar powder = 1 : 3.4 parts by weight. (6.8 litres of water per barrel)
- With volume 15 liters: Use a colloidal solution mixer (to get the best results)
Add water and continuously mix for 5 minutes to achieve a uniform
Continue to maintain slowly mixing during grout pump
Important Note
Non mixing by hand
Yield
As a guide 1 barrel yields approximately 14 litres of mortar
Shelf Life: 9 months
Packaging: 25kg/barrel
Storage Conditions
- Store properly in dry conditions in undamaged and unopened original sealed packaging
Cleaning of tools
- Clean all tools and application equipment with water immediately after use. Hardened/cured material can only be mechanically removed

We are the professional manufacturer for Cable tray, Cable ladder, Cable trunking with many kind of finished product materials : HDG, Pre-painted steel, power coating.