CONTRACTOR LATEX
A specially formulated for interior use. Usually it is applying in concretes, plaster, woods, gypsum boards etc.
USES
Regent Paints contractor latex is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create attractive aesthetic Regent Paints contractor latex like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Velvet.
ROPERTIES
Colour : Full range - as per shade card
Finish : Matt
Solids(Volume) : 52% and above
Specific Gravity : 1.40 +/- 0.1
Theoretical Coverage : 250 - 400 sq. ft. per gallon
HI GLOSS LATEX
Hi - Gloss Latex the Glamorous - interior is Latex Acrylic copolymer based Premium Latex-emulsion paint.
A specially formulated for interior use. Usually it is applying in concretes, plaster, woods, gypsum boards etc.
USES
Regent Paints Hi - Gloss Latex is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create attractive aesthetic Regent Paints Hi-Gloss Latex like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Hi - Gloss Latex.
PROPERTIES
Colour : Full range - as per shade card
Finish : Hi-Gloss
Solids(Volume) : 52% and above
Specific Gravity : 1.27 +/- 0.1
Theoretical Coverage : 250 â?? 400 sq. ft. per gallon
DRYING TIME :â?? AT 25 �° T
Touch Dry : 2 hours
GULF TEX
Gulf tex heavy texture is water borne acrylic heavily textured coating based on modified styrene emulsion with aggregates ( Mica chips), which provide special pattern on the wall, woods suited for the all climatic condition.
PROPERTIES
Colour : As per shade card
Finish : Texture finish
Consistency: Thixotropic
Solids: 65 % ± 3 %
Specific gravity: 1.70 ± 0.05
Theoretical Coverage 1 -2 m2/ltr
DRYING TIME : AT 25
To handle: 4 hours
To Recoat: overnight
Number of coats: 1
Application by: Roller for heavy tex or Hooper spray
Mono Coat Egg Shell Latex - interior is Latex Acrylic copolymer based Premium Latex - emulsion paint
A specially formulated for interior use. Usually it is applying in concretes, plaster, woods, gypsum boards etc.
USES
Regent Paints Mono Coat Egg Shell Latex is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create attractive aesthetic Regent Paints Mono Coat Egg Shell Latex like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Mono Coat Egg Shell Latex.
PROPERTIES
Colour : Full range - as per shade card
Finish : Egg Shell
Solids(Volume) : 52% and above
Specific Gravity : 1.27 +/- 0.1
Theoretical Coverage : 350 â?? 450 sq. ft. per gallon
DRYING TIME :â?? AT 25 �° T
Touch Dry : 2 hours
ACRYLIC TOP COAT
it is an acrylic resin based premium top coat for metals. It has exceptional color and gloss retention in a variety of climatic condition.
PROPERTIES
Colour : full range
Solids: 38 + 2 %
Theoretical Coverage 9 â??12 m2/Lit
Recommended (Dft) : 30 - 40 Microns/ per coat
Recommended (Wft) : 90-100 Microns/ per coat
DRYING TIME â?? AT 25 �°
Surface Dry: 5-10 mins
To Recoat: 3 â?? 4 hours
Vehicle type: Modified alkyd
Specific gravity: 1.15 �±0.05 (depends on color)
107 Builders Hardware Construction Material Equipment Suppliers
Short on time? Let Builders Hardware Construction Material Equipment sellers contact you.
Latex at the best Performance of durability tests in any walls, woods and few metals as well. An adventurous Range to sustain the sheen level and coverage of solvent based products. Adding value to extra coverage, low voc, non yellowing, acrylic features, water dilution and more. A Regent Hi-Performance and durable product.
A water - base, acrylic semi-gloss paints for interior surfaces. Excellent for heavy use areas such as walkway walls, doors, trim and kitchen cabinets.
USES
A semi - gloss finish, acrylic resin emulsion formulated to protect and beautify interior surfaces. Excellent for masonary (concrete, cement block, cinder block), wall board, stone, brick, and wood. May also be used on properly primed steel.
TEX PRIMER WHITE
Tollens Tex primer is an acrylic co-polymer primer with very fine aggregates, specially designed for priming masonry surfaces for all water based textured paints
MICRO TEX
Micro tex is a textured coating containing quartz, based on modified Acrylic emulsion, will give a flexible finish with medium textured,
PROPERTIES
Colour : As per shade card
Finish : Light texture finish
Consistency: Thixotropic
Solids: 50 % +/- 2 %
Specific gravity: 1.55
Theoretical Coverage 2.5 â??3.5 m 2/ ltr
DRYING TIME : AT 25 �°
To handle: 3-4 hours
To Recoat: overnight
Number of coats: 1 -2
Application by: Roller or brush
Description
Review
It is suitable for exterior and interior surfaces of cement plaster, concrete, bricks, masonry, asbestos cement panels and suitably primed wood. Magnum helps to conceal any small unevenness and indents in the surface.
APPLICATIONS:
Surface should be clean and dry, before the application of medium Tex. For the fresh concrete Tollens Tex primer should be used as a primer on new surfaces.
SURFACE PREPARATION:
Surface must be clean and free of, chalk, dust, and other contaminants. Clear the surface with wire brush, remove any loose adherence
PRECAUTIONS:
Keep from freezing, contains water. Using at temperatures above 4ï?°C May cause eye, nose, and throat and skin irritation. Keep out of the reach of children
Solvent based modified bituminous rust proofing , waterproofing emulsion incorporating elastomers and reinforcing agents.
PROPERTIES
Colour : black
Solids : 70 �± 2%
Specific gravity 1.40 at 25�° C
Theoretical Coverage 3 â?? 5 m2/lit (@ 70u M)
DRYING TIME :â?? AT 25 �° T
To touch: 15 min
To Recoat: 2 hours
Max.overcoat interval: Not applicable
Vehicle type: bitumen â??coal tar
Flash Point: 35�° C.
Tollens Solvbit imparts outstanding weather and light chemicals resistance. Surface has to be primed with Tolokote bitumen emulsion, if the surface is very dry or porous. The dry film provides a durable, flexible coating, which will not brake under severe climatic conditions. Typical range: -10�° C - +70�° C
Epoxy Primer Grey is a two pack polyamide cured primer generally used for epoxy system on masonry surface and cement works.
PROPERTIES
Colour : Grey
Finish : Matt
Theoretical Coverage 6-7 m2/lit on masonry surface
Spreading rate is theoretically calculated and can be effected by substrate preparation thinning and methods of application.
Solids (volume) : 24�±2%
Curing time : 3-6 hours at 25 �° C
Full cure : 7 days
Flash point : 25 �° C (ISO 367 â??83)
Specific gravity : 1.00 when mixed A+B
Pot life : 4 hours at 25 �° C
Mixing ratio : 4 parts base"A" : 1 part hardner "B"
Solvent : Epoxy thinner.
High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life. Normally Tollens Epoxy primer grey A+B mixing pot life is 4hrs.As a diluent use Tollens Epoxy thinner 15 â?? 25 %.
It is a mixture of aromatic Hydrocarbon, esters, ketone. It is recommended for Polyurethane varnishes due to its average evaporation
PROPERTIES
CHARACTERISTICS APPEARANCE COLOR TRANSPARENT LIQUID
Specific Gravity ASTM D 3505 0.85 �±.02 Kg. / lit.
Colour (Saybolt) ASTM D 1209 +30
Initial Boiling Point ASTM D 850 112�° C
Copper Corrosion ASTM D 849 None
Non â?? Aromatics ASTM D 2360 40 â?? 50%
Flash Point (Abel) IP 170 24 �° C
PRECAUTIONS:
Contents are Combustible. May cause eye, nose, and throat and skin irritation. Keep out of the reach of children
PACKING:
Do not use in tank or pit without proper protection Metal drums one lit. 1US gallon, and 5 US gallons
A general-purpose alkyd based primer with anticorrosive red iron oxide pigment for the protection of steel surfaces against moderate corrosive environments.It is an economical anticorrosive primer for general-purpose applications.
USES
It is recommended for mild steel structures and surfaces in domestic and mild corrosive environments. It is suitable for interior and exterior use.
PROPERTIES
Colour, Dry Film : Red
Finish, Dry Film : Smooth/Matt
Volume Solids, % 51�± 2
Specific Gravity : 1.46�± 0.05
Theoretical Spreading Range : 11-12 M2/L
Recommended Dft Range (Dry Film Thickness) : 35-45 Microns/Coat
Recommended Wft Range (Wet Film Thickness) : 75-90 Microns/Coat
Flash Point : 38 �° C
Flexibility : Good
Drying Time : @ 30 �° C (Temperature, humidity, air movement, film thickness and number of coats all affect the drying time.)
