Aluminium Paint

Ritver Aluminium Paint

Aluminium Paint Heat Resistant 600c

Heat Resistant Aluminium Paint 400c

Description
A heat resistance durable coating based on synthetic resin .An excellent top coat for application for primed steel structures to withstand against atmospheric corrosion. Uses on tank exteriors, Reaction vessels, structures, pipelines, exhaust system & areas exposed to dry heat attached.

Unique Features & Benefits
Excellent durability
Heat resistance coating, Resistance up to 2500-3000c
Ease of Application
Super silky and Eggshell finish
Excellent flow characteristics to form smooth and uniform finish
Excellent coverage
Good corrosion Resistance
Good weather and water resistance

Single Pack Heat Resistance Aluminium Paint Based On Silicone Resin.
Hr Aluminium Paint Film With Stand Up To 250 C.
It Gives Silver Like Finish And Brilliant Lusture To The Surface .
Good Water And Heat Resistance

High Quality Heat Resistance Paint Based On Pure Silicone Resin
Excellent Coverage And Hiding
Excellent Corrosion Resistance

Easy To Apply
Single Pack
Superior Durability
Excellent Gloss Retention

SCOPE
USES
Kisomin Aluminium Paint is a modified Synthetic Resin based enamel.
It provides high Light fastner and brightness with excellent orientation
finish. it has good adhesion on interior or Exterior surfaces.
Recommended as a decorative finish coat & can be applied on
surfaces like Grill, Windows, Cabinets & wide range Metal Structures.

FEATURES/ BENEFITS
* Smooth durable finish.
* Smooth flow & easy to apply.
* Excellent coverage & hiding.
* Superior surface protection

KEY ATTRIBUTES
* Application temperatures : 10-44 degc

VISCOSITY FOR APPLICATION
* For Brushing 40"-45" at 30C
* For Spraying 18" 20" at 30C
* For Roller 55"-60" at 30C

SURFACE PREPARATION
APPLICATION
BRUSH
CONVENTIONAL SPRAY
NOTES :
HEALTH & SAFETY
Steel : Sand the surface with coarse Sand / water paper according to the type of surfaces to remove rust, dust & other foreign particles. System of
Coating should be selected depending upon the type of substrate. Wipe to clean the surface. Apply single coat primer & allow to dry. Re sand the
surface with Sand paper & wipe to clean. Apply 2nd Coat of primer & allow drying for overnight. Before application of paint, thin down to achieve
desired viscosity & filter through white cloth. Apply Kisomin Paint to finish.
Stir the base thoroughly and then mix to uniform consistency.
Apply by diluted material, where viscosity has to be ensure 40-45 sec by f.c. B4
Add Kisomin thinner to adjust viscosity depending on spray condition. Use any standard equipment at an atomizing pressure of 3.5-4.5 kg/cm.
1. Use off the mixed paint .
2. Do not apply when temperature falls below 10c or rises above 50c and when relative humidity rises above 90%. Do not apply during rain, fog or mist
3. Brushes and spray equipment should be cleaned with Thinner,
4. Special care to be taken to close immediately the partly used Diluted Material.
Please refer to the separate Material Safety Data Sheet available with detailed information

Aluminium Paint
Therm Aluminium Heat Resistant 600 Degrees Celsius
Therm Aluminium Heat Resistant 400 Degrees Celsius