Sodium Carbonate or Soda Ash It is used to manufacture a variety of glass products such as container glass for packaging, float glass for buildings and automobiles, fiber glass for insulation, etc.
in Soap and Detergent It is used as a filler, pH adjuster, agglomerate aid, and water softener to manufacture soaps and detergents.
It is also used to prepare sodium silicate, in photograph development process as a pH regulator, swimming pools to neutralize the excess chlorine, brick industry as a wetting agent, processing non- ferrous metals, etc.
Sodium Carbonate or Soda Ash It is used to manufacture a variety of glass products such as container glass for packaging, float glass for buildings and automobiles, fiber glass for insulation, etc. in Soap and Detergent It is used as a filler, pH adjuster, agglomerate aid, and water softener to manufacture soaps and detergents. It is also used to prepare sodium silicate, in photograph development process as a pH regulator, swimming pools to neutralize the excess chlorine, brick industry as a wetting agent, processing non- ferrous metals, etc.
Sisal fibre is derived from the leaves of the plant. It is usually obtained by machine decortications in which the leaf is crushed between rollers and then mechanically scraped. The fibre is then washed and dried by mechanical or natural means. The dried fibre represents only 4% of the total weight of the leaf. Once it is dried the fibre is mechanically double brushed. The lustrous strands, usually creamy white, average from 80 to 120 cm in length and 0.2 to 0.4 mm in diameter
Sisal fibre is fairly coarse and inflexible. It is valued for cordage use because of its strength, durability, ability to stretch, affinity for certain dyestuffs, and resistance to deterioration in saltwater. Sisal is used by industry in three grades:
The lower grade fibre is processed by the paper industry because of its high content of cellulose and hemicelluloses.
The medium grade fibre is used in the cordage industry for making: ropes, baler and binders twine. Ropes and twines are widely employed for marine, agricultural, and general industrial use.
The higher-grade fibre after treatment is converted into yarns and used by the carpet industry.
The fibre is also used for non-woven matting, brushing and roving.
257 Asbestos Fiber Suppliers
Short on time? Let Asbestos Fiber sellers contact you.
Dimethylformamide (DMF) is a clear, colorless, hygroscopic liquid with a slight amine odor. The solvent properties of DMF are particularly attractive because of the high dielectric constant, the aprotic nature of the solvent, its wide liquid range and low volatility. It is frequently used for chemical reactions and other applications, which require a high solvency power. The product is known as a universal solvent. The high solubility of polyacrylonitrile in DMF, together with the good miscibility of DMF in water makes DMF the preferred solvent to produce acrylic fibers. Also, the spinning of polyurethane based elastomers is performed from DMF based solutions. Another significant application is the use of DMF as a solvent for polyurethane-based coatings on leather and artificial leather fabrics.
Application: It is used in the chemical industry as a solvent, an intermediate, and an additive; for example, in the production of pharmaceuticals, synthetic fibers, resins, agrochemicals, petrochemical industry etc.
MEG is a clear, colourless, virtually odourless, and slightly viscous liquid. It is miscible with water, alcohols, and many organic compounds, and has the molecular formula C2H6O2, CAS: 107-21-1. It has a specific gravity of 1.115 and a flash point of 110°C.
Application: It is an important raw material for industrial applications. MEG is utilized in the manufacture of polyester (PET) resins, films, fibers, antifreezes, coolants, aircraft anti-icer and deicers and solvents.
It is also utilized as raw material for paper industry, polyester Resins, adhesives and inks, chemical Intermediates, Heat Transfer, Fluids.
Wood Plastic Composites (WPCs) are composite materials made of wood fiber or wood flour and thermoplastics such as polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), or polylactic acid (PLA).� They can also contain other ligno-cellulosic and/or inorganic filler materials.
WPCs are crucial and potential engineering wood products that have been extensively employed in the fields of landscape, transportation, municipal engineering, and building construction.� They have gradually been used to replace conventional wood-based composites.� WPCs are mainly produced by the thermoplastic polymers and the biomass particles and fibers from forestry and agricultural wastes (wood, bamboo, straw, stalk, husk, and bast).
The WC line of wood-plastic composites combines the pleasing look of wood with the functionality and manufacturing ease of plastics.� These composites blend fine wood particles with renewable, biodegradable, reclaimed, recycled, or virgin plastic materials to make firm, smooth pellets for convenient handling and further processing.� The wood fibers are obtained from waste materials generated by lumber manufacturers, which are then processed to produce a consistent reinforcing product.
Silica sand, also known as industrial sand or quartz sand, is a granular material primarily composed of silicon dioxide (SiO2). It's a naturally occurring mineral deposit with high purity and is used in a wide array of applications due to its unique properties.
Feldspar is a group of rock-forming minerals that are important components of soil and are also a major source of clay minerals. When feldspar weathers, it breaks down into clay minerals like kaolinite, which are crucial for soil formation and have various industrial applications.
Kaolin, is a soft, white clay mineral primarily composed of kaolinite. It's known for its fine particle size, chemical inertness, and ability to be processed into various forms for diverse applications. Kaolin is formed by the weathering or hydrothermal alteration of aluminosilicate-rich rocks like granite.
Bentonite clay is a natural clay, primarily composed of smectite minerals, that forms from the alteration of volcanic ash or other igneous/sedimentary rocks. It's known for its ability to absorb liquids and expand, and is often used in various industrial applications.
Gypsum rock is a soft, light-colored sedimentary rock, primarily composed of the mineral gypsum (hydrous calcium sulfate, CaSO4�·2H2O), that is often found in thick beds or layers within sedimentary formations. It commonly forms in ancient seas where water rich in calcium and sulfate evaporates, leaving behind deposits. Gypsum rock is widely used in construction, agriculture, and other industries.
Limestone is a sedimentary rock primarily composed of calcium carbonate, often in the form of the mineral calcite. It can also contain dolomite (calcium-magnesium carbonate). Limestone is formed through the accumulation of marine organism remains, like shells and coral, or through chemical precipitation from seawater.
Marble chips are small, angular pieces of crushed marble, a metamorphic rock primarily composed of calcium carbonate. They are known for their durability, natural beauty, and versatility, making them suitable for various applications in landscaping, construction, and decoration and carbonate calcium factories
Sulfur granules are small, spherical pellets of elemental sulfur, commonly used in agriculture as a fertilizer and soil amendment, and in various industrial applications. They are produced by a granulation process, which involves spraying molten sulfur into a granulator, resulting in a uniform, easy-to-handle form.
257 Asbestos Fiber Suppliers
Short on time? Let Asbestos Fiber sellers contact you.
