Medium voltage indoor and outdoor, disconnectors, low voltage and double throw disconnecting switches, low voltage load disconnecting switches, low voltage fuse disconnecting switches, earthing plates, earthing rods, earthing bonds, faraday cage, copper connectors, lighting fixtures, alpek iron equipments.
Uninterrupted power supplies, accumulators, static & servo voltage regulators, frequency converters, diesel and gasoline based generators, dry type & oil filled transformers, low voltage panels, and isolated power supplies.
A variable speed dissolver to dispense, mix and homogenize products of different rheologies. Floor or through-floor mounted executions. The machine head on hydraulic rise and lower system. Infinitely adjustable impeller speed. Available with scraper and vacuum.
Operation
Mobile mixing vessels are used
Machine head is raised.
Mixing vessel is centrally held and secured by means of the clamps. On request clamping security switches added.
Machine head is lowered.
The main motor is switched on while the speed control drive indicates "o" rpm.
The speed of the stirring shaft is changed to required value during operation by means of the speed control drive. Speed indication is on the control panel. On request automatic speed control system available.
The processing height of the impeller is easily varied by means of the rise and lower system operated by an hydraulic unit.
CUSTOMISED RANGE OF AUTOMOTIVE LUBRICANTS
OESTE lubricants' super specialty products provide unsurpassed performance in automotive applications.OESTE works with esteemed auto and component manufacturers to develop unique and proprietary chemistries. From the perfect tactile feel of interiors to achieving top performance from motors, cables, switches, etc.
Dynamically light, special synthetic Silicone base oil and Lithium thickener for Over Riding Clutch
Thermally stable at elevated temperatures
Very low evaporation rate.
Safe on most plastics.
Excellent oxidation resistance.
Sprinkler irrigation is the irrigation system in which water required by the plant is sprayed like rain under the defined pressure. Water is transferred to sprinklers. Individual sprinkler system consists of the water source, pump, main pipeline, vertical pipeline, and sprinklers.
Sanbor Sprinkler Irrigation Pipes which are produced according to TS EN 12201-2 quality standard is made of high-density polyethylene (HDPE) and produced with 50-160 mm diameters and 5-6 meter length. Operating pressure is 6 atmospheres. The montage of SANBOR Sprinkler Irrigation Pipes is easy. They can be combined when the plastic seals and the clips at two sides are combined.
Advantages
Since there is no water loss in the system, water is used in the maximum level in the places where irrigation water is low (3.5 lt/sec).
It can provide irrigation without erosion in slopped lands.
Since the water is given to the soil with the rain effect, 20%-50% increase is observed in corp yield compared to other irrigation methods and quality is high. -During seed germination, the inability of the plant to reach above ground due to the layer created on the soil is prevented.
Ideal irrigation system in the soils with low depth and (shallow) permeable soils.
At the places closer to the sea, salt particles left by the sea water carried by wind, dust and insects can be washed via rain.
Since there is the opportunity to control water via sprinkler irrigation, it is the best irrigation method at the places whose groundwater level (drainage) is high.
Since there is no need for field ditches, planting area increases and agricultural works can easily be operated.
Vegetables, citrus, vineyards and other orchards can be protected from frost and heat.
Dissoluble fertilizers can be applied to vegetables with the irrigation water without extra work
Areas of Usage
It is used in the irrigation of slopped lands, wine yards, and gardens, vegetable, citrus and other orchards.
Things to take into account
While carrying, it should not be lifted and thrown. Clamps and clips can be broken.
It can stay under solar rays and be used in the fields during summer. No problem is observed.
Pipes should be stored at the possible temperatures between +5°C and +45°C.
Before using the seals for pipe connection, seal recesses should be cleaned. The seal should be completely placed.
High pressure created in motor pump outlets cause the removal of seals in the pipes. Pressure should be kept under control with a manometer. The promised pressure values on our pipes are under our warranty. In case of higher pressure levels than the indicated ones, the possible problems that can be created are not covered by the warranty
Lakto-puls pulsator has a very simple design that can fit all brands. Provides perfect milking quality, doesn’t influenced by environmental temperature or vacuum level.
Due to indirect valve control by pilot valves, enables using low powered coils (only 0, 11 amps.) and design on cooling effect of the air intake on the coils prevents disorder on pulsation even on long runs due to overheating.
Lakto-puls2 can milk two clusters at a time for economical pulsation requirements.
Central pulsation controlling unit controls up to 16 pulsators. Pulsation rate and ratio can be adjusted according to farmer and animal needs and displayed on lcd display. Controller has cascade ability for reducing the vacuum fluctuation in the milking system due to pulsators.
The pulsation controller powered by external switch mode power supplier for protecting the pcb from voltage fluctuations that may happen at network.
Quick Details
Place of Origin:
turkey
Brand Name:
OEM
Model Number:
Copper Scrap Millberry 99.9 Min
Type:
Copper Wire
Copper Content:
99.99%
Packaging & Delivery
Packaging Details
Per Buyers Request
Delivery Time
10 days
Pure copper scrap 99.99%
API - S1..S6 SERIES - RODLESS CYLINDERS
Rodless cylinders, magnetic as standard. Cylinders with direct power transmission through the tube slot onto the yoke. The new cushionings are adjustable at both ends; the flow rate is regulated from 0 to 100% by turning a pin of an angle of 90°. The new barrel with high resistance to deflection is provided with grooves for fixing various accessories. The magnetic switches can be fixed by a bracket or directly in the tube; the reed switch will not protrude out the barrel profile. The short cylinder type S2, in comparison to the standard cylinder - 0 - stroke, is up to 42% shorter; the total fitting length is therefore reduced and the cylinder is more compact and money-saving.
15 Ehv Switch Yards Suppliers
Short on time? Let Ehv Switch Yards sellers contact you.
