Find Verified Computer Software Suppliers, Manufacturers and Wholesalers

To overthrow the existing traditional time-wasting questionnaire reading with high cost, InfoAcer created a new opportunity for improvement. Just by using the popular document editing software such as Word, Excel and photoshop, you can design and print the questionnaire card/paper and scan them after being filled for the system to automatically process and recognize and deliver the reviewed result, information and score. Compared to the traditional complicated manual review and data calculation, Info OMR allows you to use flexible, reduce the cost and improve the work efficiency.

If you are interesting in InfoOMR, please let us know then we will provide the testing version for you to do the test 2 weeks, please click as following link to contact with us,
http://www.infoacer.com/TrialRequirement.aspx

Mother boards

20pcs/carton

Motherboard

DSUB Connector Compatible
Fit customer end-using mechanism.
lockable design.
Special Pin Define with additional DC Jack.

Features

1.Hardware RAID that works seamlessly between Macs and PCs.

2.The GR3660-TB3 is equipped with three configuration modes to suit every need. RAID 0/1/JBOD.

3. Thunderbolt and (USB-C) brings you 40Gbps extreme high data transfer speed.

4. GR3660-TB3 to support 2 x 3.5" / 2.5" SATA HDD/SSD.

5.Thunderbolt and The USB-C that does it all.

6. Support 15W ( 5V/3A ) Power Delivery.

7. Mini Display Port connect DVI/HDMI/VGA display devices.

8. Hardware RAID that works seamlessly between Macs and PCs

GR3660's built-in hardware RAID controller chipset and Thunderbolt and type c host interface, not only does it promise high transmission speed, it also eliminates the cross-platform usage issues associated with RAID 0 or RAID 1 setups. Also, with hardware RAID, all data is computed and processed by the built-in CPU. With such advantages, your computer performance can be focused on running the software and work, instead of handling the storage device's transmission issues.

Model No: GR3660-TB3
Interfaces: Thunderbolt Port x 2( up to 40 Gbps ), Support 15W (5V/3A) Power Delivering.
Mini Display Port: 1
Compatible Drive: 2 x 3.5" /2.5" SATA HDD/SSD ( up to 6 Gbps )
Storage Mode: 2 x Independent ( JBOD ) / RAID 0 / RAID 1
Cooling System: 4 cm Low noise fan
Operating System: Windows 7, Windows 10 or above, OS X 10.10 or above Electrical and Operating.
Requirements:
* Line voltage: 100-240V AC
* Frequency: 50Hz to 60Hz, single phase
* Operating temperature: 32° to 104° F (0° to 40° C)
* Storage temperature: -4° to 113° F (-20° to 45° C)
* Relative humidity: 5% to 95% noncondensing
Size and Weight Height: 122 mm Width: 63 mm Depth: 244 mm Weight: 1.2 kg
Product Code EAN:4713227440240
UPC:884826504429
Carton: 8 pcs per carton
Package Accessories:
* GR3660-TB3 Product Unit x1 (Removable Tray x2)
* Thunderbolt Cable x 1
* AC/DC Adapter x1
* Power Cable x 1
* Accessory kit
* Quick Installation Guide x1

GT4670-TB3 is built-in the easy-to-use hardware RAID, and it won't hurt system performance during its REBUILDING WORK completely! It would meet your requirement who always requests for both of system performance and the high memory capacity. GT4670-TB3 with RAID 1 feature would be your best cost-effective storage solution at both of data protection and the system performance.

It's really easy for you to set up your new buy GT4670-TB3 in your office or even at home. Thru Marvell's MSU Tool, you could set up its hardware RAID thru a graphic user-friendly interface. You could choose one of the following different RAID modes, RAID 0, 1 and JBOD, to fit your needs for the available large storage space together with its data protection feature.

Features

1.Hardware RAID that works seamlessly between Macs and PCs.

2.The GT4670-TB3 is equipped with three configuration modes to suit every need. RAID 0/1/JBOD.

3.Thunderbolt 3 (USB-C) brings you 40Gbps extreme high data transfer speed.

4.GT4670-TB3 to support 4 x 3.5" / 2.5" SATA HDD/SSD.

5.MCU function provides automatic and manual adjustment of FAN.

6.Thunderbolt3 The USB-C that does it all.

7. Support 15W ( 5V/3A ) Power Delivery.

8. Mini Displa yPort connect DVI/??HDMI/VGA display devices.

9. A stand-alone hardware RAID could let your Mac & PC work more efficiently

GR4670-TB3 is built-in the easy-to-use hardware RAID, and it won't hurt system performance during its REBUILDING WORK completely! It would meet your requirement who always requests for both of system performance and the high memory capacity.GR4670-TB3 with RAID 5 feature would be your best cost-effective storage solution at both of data protection and the system performance.

It's really easy for you to set up your new buy GR4670-TB3 in your office or even at home. Thru Marvell's MSU Tool, you could set up its hardware RAID thru a graphic user-friendly interface. You could choose one of the following different RAID modes, RAID 0, 1, 5, 10 and JBOD, to fit your needs for the available large storage space together with its data protection feature.

GR8670-TB3 is built-in the easy-to-use hardware RAID, and it won't hurt system performance during its REBUILDING WORK completely! It would meet your requirement who always requests for both of system performance and the high memory capacity.GR8670-TB3 with RAID 5 or even RAID 6 feature would be your best cost-effective storage solution at both of data protection and the system performance.

It's really easy for you to set up your new buy GR8670-TB3 in your office or even at home. Thru Marvell's MSU Tool, you could set up its hardware RAID thru a graphic user-friendly interface. You could choose one of the following different RAID modes, RAID 0, 1, 5, 6, 10 ,50, 60 and JBOD, to fit your needs for the available large storage space together with its data protection feature.

GR8680-TB3 is built-in the easy-to-use hardware RAID, and it won't hurt system performance during its REBUILDING WORK completely! It would meet your requirement who always requests for both of system performance and the high memory capacity. GR8680-TB3 with RAID 5 or even RAID 6 feature would be your best cost-effective storage solution at both of data protection and the system performance.

It's really easy for you to set up your new buy GR8680-TB3 in your office or even at home. Thru Marvell's MSU Tool, you could set up its hardware RAID thru a graphic user-friendly interface. You could choose one of the following 8 different RAID modes, RAID 0, 1, 5, 6, 10, 50, 60 and JBOD, to fit your needs for the available large storage space together with its data protection feature.

GR3660-B3 is a full-featured simple and easy dual bay storage device, along with RAID 0 (Striping), RAID 1 (Mirroring), and JBOD three application modes, with Super Speed USB3.0 transmission interface, not only with fast transmission performance but also easily content data safety with 16TB large storage capacity or information exchange requirement.

GR3660-B3 internal use SATA III (6G) chip design and transform into the most easy to use USB3.0 (5G) interface, backwards compatible with USB 2.0 and USB 1.1, not only comprehensive range of usage but also leaving your data transfer without waiting to complete an instant. USB 3.0 performance will slight decrease due to maximum and fragmented data transfer mainly due to the transmission technology.

In order to allow better transmission performance, GR3660-B3 add UASP function to transfer data without waiting for previous data transfer is completed before the current transmission data movement, and improved in CPU utilization, data delay and waiting .

Model No. GR3660-B3
RAID chip JM561
Host Interface USB3.0 UASP
RAID Level RAID 1 / RAID 0 / JBOD
Support Hard Drive 2 x 2.5"-3.5" SATA III SSD/HDD (6.0 Gb/s)
Single HDD Capacity Single HDD tested up to 8TB
Rebuilding YES
LED Indicators Power / HDD Access / HDD Failed / Rebuilding / Connection Status
Fan 1 x 4cm Fan
Power Supply 12V / 4A Adaptor
Certification CE / FCC
Operating System Windowsã?�Mac & Linux
Packing Content Power Adaptor / USB 3.0 Cable / Quick Installation Guide / Accessory Kit
Dimension 120(W) x 64(L) x 220(H) mm
Net Weight 0.83Kg
HDD Capacity Single HDD tested up to 8TB RAID 0
Operating temperature 32° to 104° F (0° to 40° C)
Storage temperature -4° to 116° F (-20° to 47° C)
Relative humidity 5% to 95% noncondensing

GR3660-TB2 supports Thunderbolt 2.0 (TB2) interface for an extreme high data transfer speed. And both of the two TB2 ports are equipped with up to 20Gb/s data transfer rate which is 4 times faster than USB3.0 and even 3+ times than SATA III interfaces. You could definitely use it to play your 4Khigh-resolution films with no any lagging hassle. TB2 interface not only brings you this high data transfer rate advantage, it also let you chain maximum up to another 6 more GR3660-TB2 products (or other compatible storage products).

While using PhotoShop or Lightroom Photo Editing software, you, as a professional photographer or the hobbyist, could use your GR3660-TB2 with 2.5" SSDs to help managing your huge photo library. Your RAID 1 data protection and fast data transfer rate could definitely help could definitely help you to keep your RAW files and their finished photos.

Model No GR3660-TB2
Interfaces
Thunderbolt 2 Port x 2 ( up to 20 Gbps )
Compatible Drive 2 x 3.5" /2.5" SATA HDD/SSD ( up to 6 Gbps ) /
Support large volume up to 10TB
Storage Mode 2 x Independent ( JBOD ) / RAID 0 / RAID 1
Cooling System 4 cm Low noise fan
Operating System Windows, Linux, Mac
Electrical and
Operating
Requirements * Line voltage: 100-240V AC
* Frequency: 50Hz to 60Hz, single phase
* Operating temperature: 32° to 104° F (0° to 40° C)
* Storage temperature: -4° to 113° F (-20° to 45° C)
* Relative humidity: 5% to 95% noncondensing
Size and Weight Height: 122 mm Width: 63 mm Depth: 244 mm Weight: 1.2 kg
Product Code EANï¼?4713227440042
UPCï¼?884826504221

Carton 8 pcs per carton
Package Accessories * GR3660-TB2 Product Unit x1(Removable Tray x2)
* Thunderbolt Cable x 1
* Power Cord x1
* CD x1
* Foot Pad x4
* AC/DC Adapter x1
* Quick Installation Guide x1

The new SafeTank GT1670-SB3 (6G) is fitted with high-speed e-SATA (6G) and USB 3.0 (5G) interfaces, offering blazingly fast transfer speeds compared to USB 2.0. In addition, the USB 3.0 model is backward compatible with USB 2.0 for users who haven't yet upgraded to USB 3.0.

The GT1670's newly designed removable drive trays can accommodate 3.5" HDDs, 2.5" SSDs, and 2.5" HDDs (supporting a range of widths including 15 / 12 / 9.5 / 9 / 7 mm) and combine the convenience of external plug and play drives with the advantages in stability offered by internal drives, enabling you to enjoy the best of both worlds and increased mobility.

Model No GT1670-SB3
Interfaces e-SATA(6G) Port , USB3.0(5G) Port
Compatible Drives 1 x 2.5â?�-3.5â?� SATA III ( 6.0 Gbits) HDD/SSD
Raid Level 1 x Independent volume (JBOD)
Operating System Windows, Linux, Mac
Electrical and Operating * Line voltage: 100-240V AC
Requirements * Frequency: 50Hz to 60Hz, single phase
* Maximum continuous power: 24W
* Operating temperature: 32° to 104° F (0° to 40° C)
* Storage temperature: -4° to 116° F (-20° to 47° C)
* Relative humidity: 5% to 95% noncondensing
Dimension (H): 131 mm (W): 50 mm (D): 224 mm Wight: 1.6 kg
Product Code EANï¼?4711132862270 UPCï¼?884826502692
Carton 10 pcs per carton
Package Accessories * GT1670-SB3
( with Removable drive tray enclosed x 1 )
* e-SATA Cable x 1
* USB3.0 Cable x 1
* Adapter x 1
* Power x 1
* Accessory kit
* User Manual x 1

ST2760 is a internal JBOD module, which supports two 2.5â?� SATA hard drive, you can store the operating system and data file in different hard drive or use it with a RAID card. It is designed to has the same dimension as one 3.5â?� hard drive or one floppy size, this allows you to install ST2760 in the mini-Server, Surveillance Server, 1U Server, eMail Server and POS System that has limited space. ST2760 can help you to save the problem of requiring larger capacity but with limited space.

Model No ST2760-2S-S2
Drive Bay 3.5" Floppy DriveBay
Drive Fit 2.5" SATA III HDD x 2 (9.5mm thickness)
RAID Level JBOD
Host Interface SATA III Connector (7Pin) x2
Power Supply SATA Connector (15Pin)
HDD Access Indicator LED
Color Matt Black
Structure Metal Body
Dimensions 101.7W x 147L x 25.8H(mm)
Weight 0.4(kg)
Certifications CE & FCC
Operating System
Support Windows, Linux
Packing Content Accessory Kit
HDD Capacity Single HDD tested up to 2TB
Operating temperature 32° to 104° F (0° to 40° C)
Storage temperature -4° to 116° F (-20° to 47° C)
Relative humidity 5% to 95% noncondensing

SR2611-2S-S2R+ is an internal (6Gbps) RAID module designed in 2 of 5.25â?� CD-ROM bay to satisfy the demands of SMB and industrial computing environment. With LCD tents leaving you to easily grasp HDD status.

SR2611-2S-S2R+ accommodates 2 of 3.5 â?� SATA III hard drive and offering both RAID 0 and RAID 1 functions . Uses the RAID 0 function to integrate the capacity of two hard drives and to enhance both read & write performance. On the other hand, uses RAID 1 function for data redundancy by mirroring data among both hard drives to prevent the event of a hard drive failure causes system shutdown.

Model No SR2611-2S-S2R+
Drive Bay 2 CDRom DriveBay
Drive Fit 2.5"/3.5" SATA III HDD x 2
Host Interface SATA III Connector (7Pin)
RAID Level RAID 0 / RAID 1
Hot-Swap RAID 1
Power Supply 15 PIN Power Connector x1,
BIG 4Pin Connector x 1
Engineering
Configuration
Port RS232
Status Display LCD Display
Cooling Fan 6cm Fan
Buzzer Alarm Yes
Environment Detector Fan Failure / Overheat
Dimension & Weight 146 ( W ) x 196 ( L ) x 85 ( H ) mm / 1.3 KG
Certifications CE / FCC
Operating System Windows, Linux
Function Control
Interface GUI (Windows Only)
Packing Content SATA Cableã?�Internal RS232 Cableã?�External RS232 Cableã?�Accessory Kit
HDD Capacity Single HDD tested up to 8TB RAID 0
Operating temperature 32° to 104° F (0° to 40° C)
Storage temperature 32° to 104° F (0° to 40° C)
Relative humidity 5% to 95% noncondensing

RAIDON InTANK iR2770 has a patented design that allows two 2.5â?� SATA drives to be fitted into one 3.5â?� drive space! Itâ??s equipped with optional RAID 0 to enhance the speed of transfer compare to a regular hard drive or switch to RAID 1 for an efficient and securer data backup.

Install iR2770 to the floppy or standard 3.5â?� hard drive slot, your system will become the one with RAID function. If you want to upgrade your system with RAID function but your system donâ??t have other free space. iR2770 will be the best solution you can find!

iR2770 comes with two RAIDONâ??s removable drive trays. It not only makes user easy to install the hard drives to iR2770, but change the failure hard drive easily.

Model No iR2770
ASIC WM6182A Chip
Device Interface SATA III 6.0 Gb/s
RAID Level RAID 0ï¼?1
Support Hard Drive 2Ã?2.5â?� SATA III 6.0Gb/s HDD/SSD
Support Single HDD 2TB
Auto Rebuilding YES
LED Indicators YES
Power Supply SATA 22pin Interface
Operating System Windowsï¼?Linux
Certifications CE / FCC
Function Control
Interface GUI (Windows Only)
Packing Content Quick Installation Guideã?�Accessory Kit
Dimension 102WÃ?147LÃ? 26H mm
Net Weight 0.4kg
Operating temperature 32° to 104° F (0° to 40° C)
Storage temperature -4° to 116° F (-20° to 47° C)
Relative humidity 5% to 95% noncondensing